All you need to run your factory !
Sub-category +
Linked categories +
TOP suppliers
Products (383)
Products from 1 to 80 of 383
COURTOIS MACHINES- OUTILS
Punching machine EDEL Second hand
COURTOIS MACHINES- OUTILS
Trademark : EDEL. Model : PROFILMATIC 506. Numerical control. Cylindric and rectangular forms. Travel: 6 m.
COURTOIS MACHINES- OUTILS
Punching machine AMADA VIPROS KING 368 Second hand
COURTOIS MACHINES- OUTILS
Trademark : AMADA. Model : VIPROS KING 368. Year : 2005. Power: 30 tons. Maximum thickness: 3.2 mm. Dimensions without repositioning (axis Y and X) […]
MASCHINEN WAGNER WERKZEUGMASCHINEN GMBH
Machining Centers - CNC-5-Axis Machining Centers | WMC A series
MASCHINEN WAGNER WERKZEUGMASCHINEN GMBH
- 5-axis linear machining center - Carriage (stand), dynamic - X, Y and Z axes come from the tool - 4/5 axis with counter holder integrated as a unit […]
MASCHINEN WAGNER WERKZEUGMASCHINEN GMBH
Machining Centers - CNC-5-Axis Machining Centers | WMC B series
MASCHINEN WAGNER WERKZEUGMASCHINEN GMBH
- The milling head is the 4th axis (B axis), linearly guided 5-axis machining center - Cross table, C design, rigid, vibration-damping - C-axis on the […]
MASCHINEN WAGNER WERKZEUGMASCHINEN GMBH
Machining Centers - CNC-5-Axis Machining Centers | WFS 2000 / WFS 3000 5AX
MASCHINEN WAGNER WERKZEUGMASCHINEN GMBH
- Traveling column construction 5 to 6 axes - Load-bearing + supporting body made of cast iron - Bed with three guideways - Operator ergonomics […]
DOREY
F-R Series
DOREY
CLICKING PRESS WITH MOTORISED ROTATING ARM The new series of F-R punching machines with motorised rotary arm is available both in EC as well as not EC […]
HAAS AUTOMATION EUROPE
CNC Verticals: 40-Taper Standard VF-1
HAAS AUTOMATION EUROPE
Vertical Machining Center; 20" x 16" x 20" (508 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, […]
HAAS AUTOMATION EUROPE
CNC Verticals: 40-Taper Standard VF-1YT
HAAS AUTOMATION EUROPE
Vertical Machining Center; 20" x 20" x 20" (508 x 508 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, […]
HAAS AUTOMATION EUROPE
CNC Verticals: 40-Taper Standard DM-2
HAAS AUTOMATION EUROPE
Drill/Mill Center; 28" x 16" x 15.5" (711 x 406 x 394 mm), 40 taper, 15 hp (11.2 kW) vector drive, 15,000 rpm, 2400 ipm (61 m/min) […]
EMMEGI FRANCE
CNC machining centre with 5 controlled axes - Comet R6
EMMEGI FRANCE
CNC machining centre with 5 controlled axes and 8.5 kW spindle designed for machining bars or workpieces of aluminium, PVC, light alloys in general or […]
EMMEGI FRANCE
CNC machining centre - Comet R6
EMMEGI FRANCE
CNC machining centre with 5 controlled axes and 8.5 kW spindle designed for machining bars or workpieces of aluminium, PVC, light alloys in general or […]
EMMEGI FRANCE
5-axis CNC machining centre - Satellite XL
EMMEGI FRANCE
5-axis CNC machining centre with moving gantry structure. Designed for milling, drilling, thread cutting and cutting on bars or workpieces of […]
EMMEGI FRANCE
CNC 12-axis machining centre - Quadra L1
EMMEGI FRANCE
CNC 12-axis machining centre, designed to perform milling, drilling and cutting operations aluminium and light alloys in general. QUADRA L1 is made up […]
EMMEGI FRANCE
CNC machining centre with 3+1 controlled axes - Phantomatic M3
EMMEGI FRANCE
CNC machining centre, with 3+1 controlled axes; the spindle has an automatic tool slewing system on 3 fixed positions that allows processing on 3 […]
EMMEGI FRANCE
5-axis CNC machining centre with moving gantry structure - Satellite XT
EMMEGI FRANCE
5-axis CNC machining centre with moving gantry structure. Designed for milling, drilling, thread cutting and cutting on bars or large workpieces of […]
EMMEGI FRANCE
Work centre CNC with 4 controlled axes - Comet T4
EMMEGI FRANCE
Work centre CNC with 4 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. Works bars up to d m […]
EMMEGI FRANCE
18-axis CNC machining centre - Quadra L2
EMMEGI FRANCE
18-axis CNC machining centre for milling, drilling and cutting aluminium and light alloy profiles. QUADRA L2 is composed of an automatic magazine and […]
EMMEGI FRANCE
CNC machining centre with 4 controlled axes - Comet T6
EMMEGI FRANCE
CNC machining centre with 4 controlled axes for machining bars or workpieces made of aluminium, PVC, light alloys in general or steel. It has two […]
EMMEGI FRANCE
Machining centre CNC with 4 controlled axes - Phantomatic X4
EMMEGI FRANCE
Machining centre CNC with 4 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces up to 2 mm. […]
EMMEGI FRANCE
CNC machining centre, with 4 controlled axes - Comet X4
EMMEGI FRANCE
CNC machining centre, with 4 controlled axes, and 7 kW spindle designed for machining bars or parts of aluminium, PVC, light alloys in general or […]
EMMEGI FRANCE
Machining centre CNC with 4 controlled axes - Phantomatic T3 Star
EMMEGI FRANCE
Machining centre CNC with 4 controlled axes, used for working bars of aluminium, PVC, light alloys in general and steel pieces up to 3 mm. […]
EMMEGI FRANCE
CNC machining centre with 4 controlled axes - Phantomatic M4 L
EMMEGI FRANCE
CNC machining centre, with 4 controlled axes, designed for machining bars or parts made of aluminium, PVC, light alloys in general or steel up to 2 […]
EMMEGI FRANCE
Copy router with 2 controlled axes - Nanomatic 384S
EMMEGI FRANCE
Copy router with 2 controlled axes, ideal for machining aluminium profiles, PVC and steel up to 2 mm, with possibility of machining stainless steel up […]
EMMEGI FRANCE
Manually controlled single head copy router - Copia 384S
EMMEGI FRANCE
Manually controlled single head copy router with pneumatic clamping and traverse of the head with indirect lever. Ability to cut steel up to 3 mm. […]
EMMEGI FRANCE
Horizontal end milling machine with electropneumatic feed - LILLIPUT 350 A INSO
EMMEGI FRANCE
Horizontal end milling machine with electropneumatic feed and automatic machining cycle. Milling of intermediate angles, +45° / 90° / […]
HUMARD AUTOMATION SA
High-precision automat CNC DH7
HUMARD AUTOMATION SA
INNOVATION Passionate about our work, we have become masters in industrial technologies. Our experience can be used to benefit […]
TEKNA
Machining Centres: TK 426/3
TEKNA
The TEKNA Model TK 426/3, 3 axes CNC Vertical Machining Centres, is designed for drilling, conventional milling and copy milling operations in […]
TEKNA
Machining Centre: TK 427N
TEKNA
The TEKNA Model TK 427N 4 axis CNC vertical Machining Centre is designed for drilling, convenThe TEKNA Model TK 427N 4 axis CNC vertical Machining […]
TEKNA
Machining Centre: TK 441/3
TEKNA
The TEKNA Model TK 441/3, 4 axes CNC Vertical Machining Centre, is designed for drilling, conventional milling and copy milling operations in aluminum […]
TEKNA
Machining Centre: TK 442/3
TEKNA
The TEKNA Model TK 442/3, 5 axes CNC Vertical Machining Centre, is designed for drilling, conventional milling and copy milling operations in aluminum […]
TEKNA
Machining centres: TK 419/3
TEKNA
The machining centres TK 419/3 are compact machine with remarkable capacity to work. Work capacity on X: 3200 mm, work capacity on Y: 1600 mm. The […]
TEKNA
Machining centers: TK 429 V
TEKNA
The machining centers TK 429 V are very wide machines whose Y capacity is 2000. Standard capacity in X is 4000, 6500, 8200. The machining centers TK […]
TEKNA
Machining Center: TK 444
TEKNA
Model TK 444 - Machining Center: 3 controlled axes plus 1 pneumatic to execute operations such as drilling, conventional milling and copy milling on […]
TEKNA
Production Lines : TK 804/1
TEKNA
The TK 804/1 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of […]
TEKNA
Machining Lines :TK 804/2
TEKNA
The TK 804/2 model features an automatic cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator […]
TEKNA
Machining lines: TK 804/3
TEKNA
The TK 804/3 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of […]
TEKNA
Machining center TK 428
TEKNA
The two ends of the machining centers are equipped with roller tables. The roller table, controlled by the machining center, displaces the panel for […]
TEKNA
Machining center
TEKNA
The solutions adopted by our machining centers for the production of panels for garage and industrial doors have been particularly appreciated by the […]
TEKNA
Machining centers for the production of garage and industrial doors
TEKNA
The two ends of the machining centers are equipped with roller tables.The roller table, controlled by the machining center, displaces the panel for […]
STUDER
Combined machining system (hard turning/grinding) : S242
STUDER
The combined machining system S242 combines the technologies of cylindrical grinding and hard turning in an ideal way. Due to the design concept of […]
PROFTEQ
Water drainage router for PVC windows and doors
PROFTEQ
Water drainage router for PVC windows and doors
PROFTEQ
Drainslot routers Pro_Drain
PROFTEQ
On the basis of experience acquired over the years with the DR 3 & DR 4 models, this further development has been made to offer you a […]
MORI SEIKI
Y-axis control turning center NL2500Y/700
MORI SEIKI
:Max. turning diameter 356 mm (14.0 in.).Standard turning diameter 275 mm (10.8 in.).Max. turning length 705 mm (27.7 in.). X-axis travel 260 mm (10.2 […]
MORI SEIKI
NVD6000 DCG High-Precision Vertical Machining Center for Die & Mold
MORI SEIKI
Travel: X-axis travel, longitudinal movement of table, 900 mm (35.4 in.) . Y-axis travel ,cross movement of saddle, 600 mm (23.6 in.) . Z-axis […]
MORI SEIKI
CNC lathe - DuraTurn 1530
MORI SEIKI
It is reliable, universal, precise machines and after EMO are now even easier to operate: these machines feature MAPPS III, a new interactive control […]
MORI SEIKI
Horizontal machining center NH4000 DCG
MORI SEIKI
Travel: X-axis travel <longitudinal movement of saddle> 560 mm (22.0 in.).Y-axis travel<vertical movement of spindle head>560 mm (22.0 […]
MORI SEIKI
High-Precision Vertical Machining Center NV6000 DCG/40
MORI SEIKI
-Working surface: 1,000 x 600 mm (39.4 x 23.6 in.). -Table loading capacity: 800 kg -1,760 lb.) -Max. spindle speed: 12,000 [20,000] min-1 -Tool […]
MORI SEIKI
NT4200 DCG/1000SZ High-Precision, High-Efficiency Integrated Mill Turn Center
MORI SEIKI
Capacity: max. turning diameter of the tool spindle, capto C6 φ660 mm (φ25.9 in.) and turret 2 φ350 mm (φ13.7 in.), max. […]
MORI SEIKI
NT4200 DCG/1000SZ High-Precision, High-Efficiency Integrated Mill Turn Center
MORI SEIKI
Capacity: max. turning diameter of the tool spindle, capto C6 φ660 mm (φ25.9 in.) and turret 2 φ350 mm (φ13.7 in.), max. […]
MORI SEIKI
High-Efficiency Integrated Mill Turn Center NT4250 DCG/1500SZ
MORI SEIKI
Max. turning diameter.Tool spindle: Capto C6 φ660 mm (φ25.9 in.) Turret 2: φ350 mm (φ13.7 in.). Max. turning length: 1,542 mm (60.7 […]
MORI SEIKI
High-Efficiency Integrated Mill Turn Center NT4250 DCG/1500SZ
MORI SEIKI
Max. turning diameter.Tool spindle: Capto C6 φ660 mm (φ25.9 in.) Turret 2: φ350 mm (φ13.7 in.). Max. turning length: 1,542 mm (60.7 […]
MORI SEIKI
Vertical machining center for dies and molds - NVD1500 DCG
MORI SEIKI
-Table Working surface 230 × 220 mm (9.1 × 8.7 in.) -Table loading capacity 50 kg (100 lb.) -ATC Type of tool shank HSK-E32 -Tool […]
MORI SEIKI
Turning center NL3000MC/3000
MORI SEIKI
-Max. turning diameter: 420 mm (16.5 in.) -Z-axis travel: 3,170 mm (124.8 in.) -Max. spindle speed: 3,000 min-1 -Number of tool stations: 10 [12]
MORI SEIKI
Vertical Machining Center DuraVertical 5060
MORI SEIKI
-Working surface: 900x600 mm (35.4 x 23.6 in) -Table loading capacity: 500 kg (1,100 lb) -Max. spindle speed: 10,000 min-1
MORI SEIKI
Machining center NMH6300 DCG
MORI SEIKI
High-precision horizontal machining center for 5-Axis machining.Max. spindle speed: depending on restrictions imposed by the workpiece clamping […]
MORI SEIKI
NMV5000 DCG High-Precision, 5-axis Control Vertical Machining Center
MORI SEIKI
Travel: X-axis travel, longitudinal movement of spindle head,730 mm (28.7 in.) ;Y-axis travel,cross movement of spindle head, 510 mm (20.1 in.) […]
MORI SEIKI
ZT-SERIES
MORI SEIKI
Productive Simultaneous Machining: Compact 2 Spindle Lathe.Identical performance at both spindles and turrets for simultaneous machining and efficient […]
IBARMIA
Machining center: Serie ZV 25L EXTREME
IBARMIA
High-speed cutting (HSC) machining centres, EXTREME range compact and rigid, for machining at one work area or for machining on pendulum work cycle […]
IBARMIA
Machining center: Serie ZVH 45
IBARMIA
IBARMIA ZVH 45 with taper ISO 40 (optionally HSK A-63 or HSK A-80).The latest generation of machining centres for machining of complex forms on 5 axis […]
IBARMIA
Machining center: Serie ZVH 48
IBARMIA
IBARMIA ZVH 48 with taper ISO 40 (optionally0 HSK A-63 or HSK A-80).The latest generation of machining centres for machining of complex forms on 5 […]
IBARMIA
Drilling machining centre: VS 50
IBARMIA
Centre de perçage de grande production VS 50 avec un axe Z contrôlé, permettant une capacité de perçage jusqu’à 70 mm en acier ST 60.Installation […]
IBARMIA
Drilling machining centre for rings and flanges
IBARMIA
VHS Series have the great advantage of having an automatic turning headstock (vertical / horizontal in front of the operator) that considerably […]
IBARMIA
Drills prismatic column with indexing or rotary table: D series
IBARMIA
Drills prismatic column with indexing or rotary table: D series
IBARMIA
CNC machining center
IBARMIA
General view of the IBARMIA machine VS 50/D2400 with 3 controlled axis Y/Z and C to machine bearing rings up to Ø 2400mm. Ergonomic solution. […]
IBARMIA
Machining center: Serie ZV 25U EXTREME
IBARMIA
High-speed cutting (HSC) and 5 axis machining centres, EXTREME range, compact and rigid.The 2 axis rotary table, integrated in the bed and joined to […]
IBARMIA
Machining center: Serie ZV 25D EXTREME
IBARMIA
High productivity machining centres EXTREME range compact and rapid, for pendulum work with moving column and turning pendulum table, type D.Taper ISO […]
IBARMIA
Machining center: Seri ZV 35
IBARMIA
IBARMIA ZV 35 with taper ISO 40 (optionally HSK A-63 or HSK A-80).Power is reflected by its great chips removal capacity. The rigidity of the […]
IBARMIA
Machining center: Serie ZVH 58
IBARMIA
IBARMIA ZVH 58 with taper ISO 50 (optionally HSK A-100).The latest generation of machining centres for machining of complex forms on 5 axis or […]
IBARMIA
Machining center: Serie ZV 50
IBARMIA
IBARMIA ZV 50 with taper ISO 50 (optionally HSK A-100). Machining centre dynamics combined with the capacity of a heavy milling machine. The best […]
IBARMIA
Machining center: Serie ZVH 55
IBARMIA
IBARMIA ZVH 55 with taper ISO 50 (optionally HSK A-100).The latest generation of machining centres for machining of complex forms on 5 axis or […]
IBARMIA
Machining center: Serie ZV 36
IBARMIA
Machining centre IBARMIA series ZV 36 with excellent ratio price-services.Taper ISO 40. Strokes range: X: 1200-4000mm Y: 600mm Z: 600mm
IBARMIA
Machining center: Seri ZV 40
IBARMIA
IBARMIA ZV 40 with taper ISO 40 (optionally HSK A-63 or HSK A-80).Power is reflected by its great chips removal capacity. The rigidity of the […]
IBARMIA
Machining center: Serie ZV 45
IBARMIA
IBARMIA ZV 45 with taper ISO 40 (optionally HSK A-63 or HSK A-80).Power is reflected by its great chips removal capacity. The rigidity of the […]
IBARMIA
Machining center: Serie ZV 48
IBARMIA
IBARMIA ZV 48 with taper ISO 40 (optionally HSK A-63 or HSK A-80).Power is reflected by its great chips removal capacity. The rigidity of the […]
IBARMIA
Machining center: Serie ZV 55
IBARMIA
IBARMIA ZV 55 with taper ISO 50 (optionally HSK A-100). Machining centre dynamics combined with the capacity of a heavy milling machine. The best […]
IBARMIA
Machining center: Serie ZV 58
IBARMIA
IBARMIA ZV with taper ISO 50 (optionally HSK A-100). Machining centre dynamics combined with the capacity of a heavy milling machine. The best option […]
INDEX FRANCE
Automatic lathe ABC
INDEX FRANCE
Quick, flexible and economical machining from simple screw machine parts to medium complex parts .Extremely short cycle times due to simultaneous […]
03/03/2025 -
Demande de devis sur un centre d'usinage
09/11/2024 -
Demande de contact pour Tour à commande numérique
09/11/2024 -
Demande de contact pour Tour à commande numérique
08/03/2024 -
Demande de devis pour Tours 2 axes ST-15
08/03/2024 -
Demande de devis pour Tours 2 axes ST-15
20/09/2023 -
Please provide a quote for the HAAS compact mill?
20/09/2023 -
Please provide a quote for the HAAS compact mill?
28/08/2023 -
Please send me quotation for 125-CCN R-TM / A2-4 Schaublin - 1 pc
28/08/2023 -
Please send me quotation for 125-CCN R-TM / A2-4 Schaublin - 1 pc
11/08/2023 -
Demande de devis sur un centre d'usinage cnc.
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
