WHITE PAPERS
...
Innovative Fastening Solutions. Lower Assembly Costs.
Plastic part compression limiter CL6000
Series CL6000 Aluminum: The Series CL6000 is machined from 2024 aluminum as this grade provides the best […]
Find out more
Brass compression limiter CL8100
Series CL8100 Headed Brass: The CL8100 headed brass Compression Limiters are the same as the CL8000 with […]
Brass compression limiter CL8000
Series CL8000 Brass: The Series CL8000 is machined from 360 brass. Similar to the CL6000, the CL8000 can […]
Aluminum compression limiter CL6100
Series CL6100 Headed Aluminum: The CL6100 headed aluminum Compression Limiter is the same as the CL6000, […]
Standard Wall Spacers | Series SP100
SPIROL ® Spacers and Tubular Products are formed into butted tubes from cold rolled […]
Compression Limiters
The primary function of a Compression Limiter is to provide and maintain joint integrity of a plastic […]
Carbon steel compression limiter CL350
Series CL350 Split Seam: Similar to the Series CL200 Compression Limiter, the CL350’s were […]
Carbon steel compression limiter CL500
Series CL500 Molded-In: The Series CL500 is produced from low carbon steel with a butted seam to prevent […]
Heavy Wall Spacers | Series SP150
SPIROL ® Spacers and Tubular Products are formed into butted tubes from cold rolled strip. A […]
Special Spacers and Rolled Tubular Components
SPIROL specializes in replacing costly machined and cold-formed components with less expensive […]
Metal Spacers
SPIROL's standard range of roll formed tubular Spacers includes both metric and inch specifications in a […]
CL220 Split Seam Compression Limiter
The Series CL220 Compression Limiter is produced from high carbon steel and intended for post-mould […]
Carbon steel compression limiter CL460
Series CL460 Oval Molded-In: The CL460 Series is similar to the oval Series CL400, but produced with a […]
Carbon steel compression limiter CL400
Series CL400 Oval Press-In: Produced from high carbon steel, the oval Series CL400 accommodates up to […]
Carbon steel compression limiter CL200 series
Series CL200 Split Seam: The Series CL200 Compression Limiter is produced from high carbon steel and […]
Moulded-In Threaded insert | Serie 63 / Serie 65
Moulded-In Inserts offer exceptional torque and pull-out resistance due to unrestricted plastic flow […]
Threaded insert
SPIROL offers Heat/Ultrasonic, Molded-In, Press-In, and Self-Tapping Inserts. Our standard Inserts have […]
Automatic Heat Insert Driver | Model HA
The SPIROLModel HA Automatic Heat Insert Driver provides an accurate and consistent method to install […]
Pneumatic Heat Insert Driver | Model HP
The SPIROLModel HP Pneumatic Heat Insert Driver provides an accurate and consistent method to install […]
Manual Heat Insert Driver | Model HM
As much as 75% of an Insert’s performance […]
Semi-Automatic Pin Inserter | Model CR
This robust, vertical pin insertion machine is ideally suited for moderate to high production for […]
Compression limiters
In applications where the components are plastic, a compression limiter is necessary to prevent creep or […]
Semi-Automatic Pin Inserter | Model PR
This exceptionally versatile, vertical installation machine is ideally suited for moderate to high […]
Manual Pin Inserter | Model PM
This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for […]
Horizontal Dual Pin Inserter | Model HC
SPIROL's Model HC Dual Pin Inserter is a lightweight, portable, horizontal Pin Inserter designed to […]
Threaded insert | SERIES 19 END 29
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum […]
Heat/Ultrasonic Inserts | Series 14
Series 14 Tapered Hole — Tapered design for tapered holes for ease of location and reduced installation time.
Self Tapping Inserts | SERIE 10
Series 10 Thread Forming - Self-Tapping Inserts are versatile. They can be used in more plastics, […]
Press-In Inserts | SERIES 50 / 51
Series 50 Symmetrical and Series 51 Headed — Press-In Inserts are designed to be pressed into […]
Coiled spring pin 500 series
SPIROL's Coiled Spring Pins are engineered products that were specifically designed to address […]
Coiled spring pin superflex | Series 600
SPIROL's Coiled Spring Pin, Series 600 Superlex Pins have a loosely wrapped outer coil and a diameter at […]
Straight pin | KP200 / KP300
Offered with or without a head, Knurled Pins are available with either straight or helical knurls. […]
Splined pin FH400
Offered with a head, Barbed Pins were created specifically for use in plastic assemblies. The raised […]
Slotted Spring Pins
Slotted Spring Pins are headless hollow cylindrical tubes having a longitudinal slot down the […]
Press-N-Lok™ Pins
SPIROL's BP100 Press-N-Lok™ Pin has opposing barbs on each end of the pin and is designed to […]
Coiled Spring Pins
SPIROL offers Coiled Spring Pins in three different duties, light duty, standard duty and heavy duty, to […]
Solid pin DP100
Offered with or without a head, Straight Pins are distinguished by their uniformity. The chamfered ends […]
Model HA Automatic Heat Insert Driver
The SPIROL Model HA Automatic Heat Insert Driver provides an accurate and consistent method to […]
Vibratory Feed System - Series 2000
The leading edge of radial drive technology. Features: Two independent axes of […]
Platen-style Multi-tipHeat Insert Driver | Model PH
The SPIROLModel PH Heat Insert Driver provides an accurate and consistent method to simultaneously […]
Heavy Duty Manual Pin Inserter | Model PMH
This exceptionally versatile tool is ideally suited for low to moderate levels of production: from a […]
Smooth guide bushing | SERIE SD200
Spring alignment dowels are used to accurately locate components with respect to each other. They are […]
Smooth guide bushing | SERIE DB100
Dowel bushings are used to locate components in conjunction with bolts which pass through the inside of […]
Dowel Bushings
SPIROL® Series DB100 Dowel Bushings, Series SD200 Spring Alignment Dowels, and Series GD100 Ground […]
SPRING ALIGNMENT DOWELS/BUSHINGS
Spirol’s roll formed hardened bushings are designed to meet one or more of the following […]
PRECISION MACHINED NUTS
SPIROL offers a comprehensive line of standard precision-machined nuts designed for a broad set of […]
Pin Driving Chuck | MODEL SPD
Low cost alternative for low insertion force. This light duty, stainless […]
Pin Driving Chucks MODELS CXA, CXD
Low cost alternative for high insertion force. These heavy duty pin driving chucks are designed […]
Compression disc spring
Disc Springs are conically-shaped components designed to be axially loaded. Due to their predictability, […]
Series 550 Cosmetic Coiled Pins
The Series 550 Cosmetic Coiled Pin was designed specifically for cosmetic cases to ensure the […]
Pre-stacked spring washers
SPIROL offers pre-stacked spring washers (greased or ungreased) in custom configurations, shrink wrapped […]
Disc Springs
Disc springs are conically-shaped, washer-type components designed to be axially loaded. […]
Garage Door Spacers
Design-in SPIROL ’s corrosion-resistant Garage Door Spacers for the lowest cost, quick […]
Conveyor Spacers | Series CS100
For Gravity Feed or Skate Wheel Conveyors and Conveyor Systems. SPIROL ® Conveyor Spacers […]
Buyers
Suppliers