All you need to run your factory !
Linked categories +
Star categories
Products (474)
Products from 1 to 80 of 474
SPIROL
SPRING ALIGNMENT DOWELS/BUSHINGS
SPIROL
Spirol’s roll formed hardened bushings are designed to meet one or more of the following objectives: #1; Align mating components, #1; Eliminate […]
SPIROL
PRECISION MACHINED NUTS
SPIROL
SPIROL offers a comprehensive line of standard precision-machined nuts designed for a broad set of applications. Our products are clean, burr […]
voestalpine Sadef
Profiled tubes
voestalpine Sadef
The interchangeable tooling of thousands of existing section shapes allows Sadef to supply a perfect steel section in the right material (e.g. […]
voestalpine Sadef
Steel profiles
voestalpine Sadef
The interchangeable tooling of thousands of existing section shapes allows Sadef to supply a perfect steel section in the right material ( stainless […]
EMILE MAURIN Eléments Standard Mécaniques
Hygienic range
EMILE MAURIN Eléments Standard Mécaniques
The hygienic components provide you with a very high quality surface, smooth edges, a sealed securing rod, suitable angles, etc. Everything has been […]
CERGY-VIS
Spacers - Balls : Female Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Female Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Female Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : Female Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : Male Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Male Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Male Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : Male Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - Non-hardened A2 Stainless Steel
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - Non-hardened A2 Stainless Steel
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - 60-66 HRC Hardened Steel - Hardened and Polished
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - 60-66 HRC Hardened Steel - Hardened and Polished
MONTECH
Supporting profile TP-16-40 L=1000mm
MONTECH
This is a profile system that is compatible with all products. It is specifically designed for dynamic loads, but it is equally suitable as static […]
KEMPER
Rubber nozzles
KEMPER
Rubber nozzles can be put directly on one-pipe-exhaust of lorry Models: inlet opening Ø 150 mm for hoses, diameter 100 mm
HEINZMANN GMBH & COKG
ODYSSEUS Injector: ICR-DS-50
HEINZMANN GMBH & COKG
Solenoid-controlled fuel injector for engines with cylinder power up to 50 kW.
HEINZMANN GMBH & COKG
ODYSSEUS Injector: ICR-DS-100
HEINZMANN GMBH & COKG
Solenoid-controlled fuel injector for engines with cylinder power up to 100 kW.
HEINZMANN GMBH & COKG
ODYSSEUS Injector: ICR-DS-300
HEINZMANN GMBH & COKG
Solenoid-controlled fuel injector for engines with cylinder power up to 300 kW.
HEINZMANN GMBH & COKG
ODYSSEUS Injector: ICR-DS-500
HEINZMANN GMBH & COKG
Solenoid-controlled fuel injector for engines with cylinder power up to 500 kW.
HEINZMANN GMBH & COKG
Gas Engine Management: KRONOS 10
HEINZMANN GMBH & COKG
Mechanically adjustable basic system for mixture control on gas engines consisting of throttle valve, Venturi gas mixer, and gas regulator screw. The […]
HEINZMANN GMBH & COKG
Gas Engine Management: KRONOS 20
HEINZMANN GMBH & COKG
Extension of the KRONOS 10 system using a motor actuated gas valve and a digital electronic control unit with electronic mixture control.The open-loop […]
HEINZMANN GMBH & COKG
Gas Engine Management: KRONOS 30
HEINZMANN GMBH & COKG
Digital, full authority, electronic mixture control system, with optional integrated speed/load control. A self-sufficient metering system, combined […]
HEINZMANN GMBH & COKG
Gas Engine Management: ELEKTRA
HEINZMANN GMBH & COKG
· Fully integrated stand alone gas metering system · Optional Lambda control with extended version · Extendable modular concept · High flow control […]
HALDER FRANCE SAS
Adjustable Clamping Levers inner parts from stainless steel, with female thread - EH 24390
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Adjustable Clamping Levers inner parts from stainless steel, with screw - EH 24390
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing, with female thread - EH 24420.
HALDER FRANCE SAS
Advantages of axial bearing: Double clamping force with same lever size, by reducing the surface friction. Protection of workpiece by a fixed locating […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing from stainless steel - EH 24420
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing, with screw - EH 24420
HALDER FRANCE SAS
Advantages of axial bearing: Double clamping force with same lever size, by reducing the surface friction. Protection of workpiece by a fixed locating […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing from stainless steel, with screw - EH 24420
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Disc-Type Handwheels DIN 3670 - EH 24570
HALDER FRANCE SAS
There are gripping indentations on the rear sides. Hub machined; rim turned and mirror-finished on all sides, non-machined surfaces cleanly blasted. […]
HALDER FRANCE SAS
Handwheels DIN 950 cast iron - EH 24580
HALDER FRANCE SAS
Hub machined; rim turned and mirror-finished on all sides, non-machined surfaces cleanly blasted. Material Handwheel Grey cast iron GG Machine handle […]
HALDER FRANCE SAS
Handwheels similar to DIN 950, stainless steel - EH 24591
HALDER FRANCE SAS
Hub machined; rim turned and mirror-finished on all sides, non-machined surfaces cleanly blasted. Material Handwheel Stainless steel A4 Machine handle […]
HALDER FRANCE SAS
Disc-Type Handwheels light metal - EH 24600
HALDER FRANCE SAS
There are gripping indentations on the rear sides. Hub machined; rim turned and mirror-finished on all sides; non-machined surfaces cleanly […]
HALDER FRANCE SAS
Spoked Handwheels light metal - EH 24610
HALDER FRANCE SAS
Hub machined; rim turned and mirror-finished on all sides; non-machined surfaces cleanly blasted.The non-machined, raw surfaces are blasted; together […]
HALDER FRANCE SAS
Index Plungers simple finish - EH 22120
HALDER FRANCE SAS
Application is limited to cases not requiring a precise positioning. Simple finish with very small dimensions. Material Body Steel, zinc-plated by […]
HALDER FRANCE SAS
Index Plungers compact with hexagon collar, with T-handle EH 22110
HALDER FRANCE SAS
Index plungers are used for indexing bores. Simple handling, e.g. when using safety gloves, with higher pull release. Types with / without lock have […]
HALDER FRANCE SAS
Index Plungers with mounting flange, horizontal - EH 22110
HALDER FRANCE SAS
Index plungers are used for indexing bores. Material Housing Zinc die-cast, plastic coated, black Locking pin Stainless steel 1.4305 Knob […]
HALDER FRANCE SAS
Index Plungers with hexagon collar, stainless steel - EH 22120
HALDER FRANCE SAS
Index plungers are used for indexing bores. Material Body Stainless steel 1.4305 Locking pin Stainless steel 1.4305, nickel-plated Knob Stainless […]
HALDER FRANCE SAS
Index Plungers with mounting flange - EH 22120
HALDER FRANCE SAS
Index plungers are used for indexing bores. For fixing onto thin walled parts. The small dimensions are a feature of these index plungers. Material […]
HALDER FRANCE SAS
Index Plungers with pull-ring EH 22120
HALDER FRANCE SAS
Index plungers are used for indexing bores. Material Body Steel, blackened Stainless steel 1.4305 Locking pin Stainless steel 1.4305, nickel-plated […]
HALDER FRANCE SAS
Index Plungers for thin-walled pieces EH 22120
HALDER FRANCE SAS
Index plungers with throughgoing bore for thin-walled pieces. Material Body Steel, zinc-plated by galvanization Locking pin Stainless steel 1.4305, […]
HALDER FRANCE SAS
Index Bolts EH 22120
HALDER FRANCE SAS
Index bolts are used for indexing purposes. Plastic cover for grip allows better handling. Material Body Free cutting steel, blackened Stainless steel […]
HALDER FRANCE SAS
Lateral Plungers with thread, without seal - EH 22150
HALDER FRANCE SAS
To be used for positioning and applying pressure, e.g. during painting and sandblasting. Material Body Steel, zinc-plated by galvanization Spring […]
HALDER FRANCE SAS
Lateral Plungers with thread, with seal - EH 22150
HALDER FRANCE SAS
To be used for positioning and applying pressure, e.g. during painting and sandblasting. Sealed against chips and dirt. Material Seal CR Body Steel, […]
HALDER FRANCE SAS
Lateral Plungers with thread, without seal, with female thread - EH 22150
HALDER FRANCE SAS
To be used for positioning and applying pressure, e.g. during painting and sandblasting. Material Body Steel, zinc-plated Threaded washer Steel, […]
HALDER FRANCE SAS
Lateral Spring Plungers with spring steel sheet - EH 22160
HALDER FRANCE SAS
The lateral spring plunger with spring steel sheet guarantees a simple and secure positioning of workpieces or components at stops or fixture plates, […]
HALDER FRANCE SAS
Retaining Cables - EH 22400
HALDER FRANCE SAS
These retaining cables secure the single-acting ball lock pin EH 22340., EH 22350., EH 22370. and EH 22380., as well as clamping pin […]
HALDER FRANCE SAS
Operating elements EH 2430 U-Handles
HALDER FRANCE SAS
Ergonomic design offering high stability and smooth surfaces.Material: Aluminium, drawn, bright, slip-grinded, aluminium, plastic-coated, black RAL […]
HALDER FRANCE SAS
EH 2501 (Machine element)
HALDER FRANCE SAS
Spring plunger in robust and compact design with fine-pitch thread and integrated position sensing using standard inductive sensors. Suitable for […]
HALDER FRANCE SAS
Machine and Fixture Elements EH 2203.
HALDER FRANCE SAS
Note:To be used for locating or for applying pressure or lifting off.Temperature range up to + 250 °C.Material:BodyFree cutting steel, […]
HALDER FRANCE SAS
Machine and Fixture Elements EH 2205
HALDER FRANCE SAS
Note:To be used for locating or for applying pressure or lifting off.Temperature range up to + 250 °C.Material:Body Free cutting steel, […]
HALDER FRANCE SAS
Machine and Fixture Elements EH 2207
HALDER FRANCE SAS
Note:To be used for ejecting or for applying pressure or lifting off or as attenuation element.Spring plungers can be fitted and removed by means of […]
HALDER FRANCE SAS
Operating Elements EH 2433
HALDER FRANCE SAS
Note: Cast-iron burr grinded, blasted. Hub machined Material: Handle body Size 63: Malleable cast iron. Sizes 80-250: Nodular cast iron Machine […]
HALDER FRANCE SAS
Operating Elements EH 2445
HALDER FRANCE SAS
Material:Steel, turned, galvanized
HALDER FRANCE SAS
Operating Elements EH 2448
HALDER FRANCE SAS
Material:Free cutting steel, blackened
HALDER FRANCE SAS
Operating Elements EH 2449
HALDER FRANCE SAS
Note: Pressure lug for thrust pad to DIN 6311 S, EH 2256.Pin pressed-in Material: Free cutting steel, blackened. Pressure lug hardened, […]
HALDER FRANCE SAS
Machine Elements EH 2505
HALDER FRANCE SAS
Note:It is a self-centering and non-floating tapered shaft hub in corrosion-protected design with a hexagon nut. By using tapered shaft hubs, all […]
HALDER FRANCE SAS
Machine Elements EH 2510
HALDER FRANCE SAS
Note: Quick plug coupling with radial offset compensation for multiple applications, e.g. as a link between a piston rod and a linear movement unit. […]
HALDER FRANCE SAS
Machine Elements EH 2512
HALDER FRANCE SAS
Note: For levelling of machines and installations. For vertical adjustment, the self-locking height adjusting elements are fitted with a fine-pitch […]
HALDER FRANCE SAS
Combi Parts EH 15800
HALDER FRANCE SAS
System Adaptor Plates (T-slot section)Material: Steel, case-hardened, ground
HALDER FRANCE SAS
Combi Parts EH 15810
HALDER FRANCE SAS
System Adaptor Plates (T-slot cross section) Material: Steel, case-hardened, ground
HALDER FRANCE SAS
Combi Parts EH 16810
HALDER FRANCE SAS
System Adaptor PlatesMaterial: Steel, case-hardened, ground
HALDER FRANCE SAS
Basic Elements EH 1901
HALDER FRANCE SAS
Pallets DIN 55 201-A1Material: Grey cast iron, guide tracks hardened
HALDER FRANCE SAS
Basic Elements EH 1906/EH 1907
HALDER FRANCE SAS
Clamping Angles, semi-finished Material: Grey cast iron, Aluminium
HALDER FRANCE SAS
Basic Elements EH 1908
HALDER FRANCE SAS
Clamping Cubes, semi-finished Material: Grey cast iron
HALDER FRANCE SAS
Basic Elements EH 1912
HALDER FRANCE SAS
Base Plates, semi-finished Material: Grey cast iron
GREENE TWEED
Anti-Extrusion Back-up Rings
GREENE TWEED
Greene, Tweed offers a variety of flexible custom designs to address any back-up ring request. Whether you need a solid or scarf cut, rod, piston or […]
GREENE TWEED
Valve Components
GREENE TWEED
Valve Components from Greene, Tweed are constructed from our Arlon® thermoplastic materials. The use of Arlon in Valve Components gives them the […]
GREENE TWEED
CMP Retainer Ring
GREENE TWEED
Greene, Tweed understands the industry's need for part design expertise, high-performance plastic materials, efficient materials-processing techniques […]
KIPP FRANCE
Hinges in plastic
KIPP FRANCE
Material : Glass-fibre reinforced thermoplastic;axle in stainless steel Surface finish : Hinge black, axle natural finish Note : Hinges with different […]
KIPP FRANCE
Joint Bars 04378
KIPP FRANCE
Material:Tempered steelSurface finish:Black oxide finishNote:The height of the Hook Holders and Hook Clamps can be raised with Joint Bars.
KIPP FRANCE
Plastic Knurled Nuts 06013
KIPP FRANCE
Material:Black duroplastic PF 31,threaded bush in brassSurface finish:Threaded bush nickel-plated
KIPP FRANCE
Cylindrical Grips 06325 / 06326
KIPP FRANCE
Novo·Grip Cylindrical Grips are a product with a universal range of applications thanks to the harmonic combination of form and function. Esthetics, […]
KIPP FRANCE
Cylindrical Safety automatically returning Grips 06328
KIPP FRANCE
The characteristics of the simple cylindrical grip naturally also apply to the automatically returning Cylindrical Safety Grip. This product combines […]
KIPP FRANCE
Crank Handles with cylindrical fold-away grip 06500
KIPP FRANCE
Of course, Novo·Grip Crank Handles comply with standards regarding their centre distances. They also come with Cylindrical Fold-Away Grips, highly […]
KIPP FRANCE
Clamp Levers with internal thread and plastic handle,steel or stainless steel 06600 / 06601
KIPP FRANCE
For many people the Novo·Grip Clamp Lever represents the key to secure and comfortable gripping. This lever provides a future-oriented and powerful […]
KIPP FRANCE
Clamp Levers with external thread and plastic handle, steel or stainless steel 06610 / 06611
KIPP FRANCE
Material, surface finish:Handle in glass-fibre reinforced plastic with toothed wheel in sprayed zincSteel parts quality class 5.8, black oxide finish […]
KIPP FRANCE
Wing Grips in stainless steel 06651
KIPP FRANCE
Material, surface finish:Stainless steel 1.4308,ground and polishedOn request:Wing Grips with external threads.
KIPP FRANCE
Flat Four Lobe Grips 06855
KIPP FRANCE
Extraordinary gripping safety combined with attractive design are key elements to outstanding functionality. Due to their flat construction, the Flat […]
Users who saw this also viewed
15/04/2024 -
Demande de devis sur un verrou à compression Double Red
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
