All you need to run your factory !
All products of ROEMHELD
Offers of ROEMHELD - Offers from 1 to 36 on 36
Market leader in hydraulic clamping technology
Workpiece power workholding | Machine vices
Mechanical, mechanical-hydraulic and hydraulic workpiece clamping systems and standard fixtures for […]
Angular Clamp, hydraulic single acting, with spring...
Application Angular clamps are used for clamping and locking on machines and plants, on press bed […]
SPEEDY classic - hydraulic, mechanical
the extensive and multi-purpose hydraulic/mechanical zero point mounting system in 4 sizes from 5.3 to 30 kN
Position Flexible Clamp B 1.732
Description The position flexible clamp is a small vice with two movable jaws, which are operated […]
Position Flexible Clamping Claw B 1.733
Application Position flexible clamping elements can be used for supporting and clamping of unstable […]
SPEEDY hydratec - hydraulic, double acting
the hydraulic double-acting zero point mounting system is of universal use due to its compact design and […]
SPEEDY airtec - pneumatic
the zero point mounting system with pneumatic operation in modular design, with centre locking and […]
Hinge Clamps with Flat Clamping Lever B 1.829
Application The hinge clamp with flat clamping lever is a compact hydraulic clamping element for […]
Concentric Clamping Elements H 4.306
Application This hydraulically-operated concentric clamping element can be equipped with especially […]
FSS clamping systems
The core elements of a FSS clamping system are the clamping and support elements that can be used in […]
Built-in Pistons single acting, with spring return max....
Application Built-in pistons are used in bars and blocks for clamping and locking of workpieces and […]
Pull Clamps WZ 4.2180
Application Double-acting pull clamps for clamping dies on a press bed or press ram. Thanks to the […]
Wedge Clamps Electro-Mechanical self-locking WZ 5.2670
Application Electro-mechanical wedge clamps are used for hydraulic free clamping of dies on sliding […]
Angular Clamps WZ 5.2610
Application Automatic clamping of dies • on the press ram • on blank holders • at […]
Pivot and Pull Clamps WZ 2.2185
Description A control mechanism translates the stroke of the double-acting piston into a tilting and […]
Flexline Rapid Clamping Systems with Drive Chain - WZ 3.2280
Application Rapid clamping systems are used for the automatic clamping of dies of varying sizes on the […]
Swing Sink Clamps double acting, with 90° swing angle WZ...
Application Swing sink clamps are installed in press rams or press beds, in machine tools and plants. […]
Wedge Clamps for Straight Clamping Edge - WZ 2.2451
Application Double-acting wedge clamps are particularly suitable for safe clamping of dies with […]
Wedge Clamps for Straight Clamping Edge WZ 2.2460
Application Double-acting wedge clamps are particularly suitable for safe clamping of dies with […]
Extending Clamps WZ 2.2480
Application • Preferably on press beds • For clamping and locking dies and moving bolsters […]
Sliding Clamp compact single acting with spring return -...
Application The "compact" sliding clamp is a hydraulic clamping element, used with minimum […]
Swivel and Pull Clamps - WZ 2.1833
Application Swivel and pull clamps are used on presses and high-speed punching presses. Thanks to the […]
Double-T Clamping Bars WZ 2.1832
Application • For clamping of dies on the press bed and press ram • When the available […]
Clamping Bars WZ 2.2095
Application The clamping bars are used permanently installed on press beds and rams, on machines and […]
Clamping Bars WZ 2.2096
Application The clamping bars are used permanently installed on press beds and rams, on machines and […]
Threaded-Body Universal Cylinder B1.309
Description The threaded-body universal cylinders are delivered with the same piston diameters and […]
SPEEDY metec - mechanical
the solid mechanical zero-point mounting system, that facilitates simple and low-cost solutions in 2 […]
Universal Clamping Cylinder B1.310
Description Universal clamping cylinders are particularly suited for clamping fixtures designed to […]
Threaded-Body Cylinder B 1.4301
Description These clamping cylinders may be threaded directly into tapped holes of the fixture. […]
Concentric Positioning and Clamping Elements H 4.300
Description Concentric positioning and clamping with two or three-jaw chucks on stationary fixtures […]
Quick-Change Mounting Plate M 8.302
Application The quick-change mounting plate can be mounted onto all modulog modules and devices […]
Flat Clamp B 1.8231
Application The flat clamp is a compact and flat clamping element with large clamping stroke. This […]
Block Clamps B 1.8233
Application Hydraulic block clamps are particularly suitable for clamping of workpieces, that require […]
Hydraulic Threaded-Body Clamping Module B 1.480
Application The hydraulic threaded-body clamping module pull-type was developed for screwing in into: […]
