All you need to run your factory !
Linked categories +
Products (195)
Products from 1 to 80 of 195
ESAB FRANCE SAS
OK Tigrod 5554 2.4mm 2.5kg
ESAB FRANCE SAS
OK Tigrod 5554 is a solid aluminium rod with a content of 2,7% Mg. It´s recommended for welding of AlMg alloys like 5454. Typical applications […]
ESAB FRANCE SAS
OK Tigrod 13.38 2.0x1000mm 5kg
ESAB FRANCE SAS
A non copper coated, low-alloyed, (9CrMoVN), rod for GTAW of high-temperature steels and steels for hot hydrogen service especially in oil refineries. […]
ESAB FRANCE SAS
OK Tigrod 13.37 1.6x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.37 is a 9Cr-1Mo-alloyed, copper-coated rod for the GTAW of high temperature steels and steels for hot hydrogen service, especially in oil […]
SES-STERLING SA
SES soldering wire
SES-STERLING SA
SES soldering wire is an alloy of 60% tin from prime molten material. The soldering wire comprises 4 internal cores containing the soldering flux. […]
SES-STERLING SA
Soldering wire in tin and copper
SES-STERLING SA
This wire is lead free, it gets an excellent absorptivity on copper, galvanized copper, brass and nickel. Taking into account the nature of metals […]
ESAB FRANCE SAS
OK Tigrod 13.23 1.6x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.23 is a 0.9Ni-alloyed (ER80S-Ni1), copper-coated rod for the GTAW of low-temperature, fine-grained steels. The wire provides good impact […]
ESAB FRANCE SAS
OK Tigrod 13.17 2.0x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.17 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated rod for the GMAW of creep-resistant steels like SA-387 Grade 22, A335 Grade P22 or […]
ESAB FRANCE SAS
OK Tigrod 13.08 1.6x1000 5kg
ESAB FRANCE SAS
OK Tigrod 13.08 is a 1.5Mn-0.4Mo-alloyed (ER80S-D2), copper-coated rod for the GTAW of creep-resistant steels of the same type, such as pipes in […]
ESAB FRANCE SAS
OK Autrod 13.25 1.0mm 15kg
ESAB FRANCE SAS
OK Autrod 13.25 is a 1.0Ni-0.3Mo-0.1Ti-alloyed, copper-coated, solid wire for the GMAW of low-alloyed, high tensile strength steels and fine-grained […]
ESAB FRANCE SAS
OK Autrod 13.23 1.0mm 15kg
ESAB FRANCE SAS
A copper coated, Ni-alloyed (0,9% Ni), solid wire for GMAW of low-temperature fine-grained steels. The wire provides good impact toughness down to -50 […]
ESAB FRANCE SAS
OK Autrod 13.17 1.0mm 15kg
ESAB FRANCE SAS
OK Autrod 13.17 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated, solid wire for the GMAW of creep-resistant steels like SA-387 Grade 22, A335 Grade […]
ESAB FRANCE SAS
OK Autrod 12.51 0.6mm 5kg
ESAB FRANCE SAS
A copper coated, G3Si1/ER70S-6 solid wire for GMAW of all general structural and engineering unalloyed and low-alloyed carbon-manganese steels. The […]
ESAB FRANCE SAS
OK Autrod 12.51 0.9mm 500kg
ESAB FRANCE SAS
OK Autrod 12.51 is a copper-coated solid wire with higher levels of deoxidizers (manganese and silicon). The high content of deoxidizers allow welding […]
ESAB FRANCE SAS
OK AristoRod 79 1.0mm 18kg
ESAB FRANCE SAS
OK AristoRod 79 is a 0.3Cr-1.9Ni-0.5Mo-alloyed, bare, solid wire for the GMAW of high strength steels, heat-treated steels and fine-grained structural […]
ESAB FRANCE SAS
OK AristoRod 69 0.8mm 15kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 69 is a low-alloyed, chromium-nickel-molybdenum (0,3% Cr, 1,4% Ni, 0,25% Mo), solid wire for GMAW of high tensile […]
ESAB FRANCE SAS
OK AristoRod 55 0.8mm 15kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 55 is a low-alloyed, chromium-nickel-molybdenum (0,5% Cr, 0,5% Ni, 0,2% Mo), solid wire for GMAW of high strength […]
ESAB FRANCE SAS
OK AristoRod 55 1.0mm 18kg
ESAB FRANCE SAS
OK AristoRod 55 is a 0.5Cr-0.5Ni-0.2Mo-alloyed, bare, solid wire for the GMAW of high strength steels. OK AristoRod 55 is treated with ESABs unique […]
ESAB FRANCE SAS
OK AristoRod 13.26 0.8mm 15kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 13.26 is a low-alloyed, nickel-copper (0,8% Ni, 0,45% Cu), solid wire for GMAW of weathering steels, such as […]
ESAB FRANCE SAS
OK AristoRod 13.22 1.0mm 18kg
ESAB FRANCE SAS
OK AristoRod 13.22 is a 2.5Cr-1.0Mo-alloyed, bare, solid wire for the GMAW of creep-resistant steels of similar composition, with service temperatures […]
ESAB FRANCE SAS
OK AristoRod 13.12 0.8mm 15kg
ESAB FRANCE SAS
OK AristoRod 13.12 is a 1.1Cr-0.5Mo-alloyed, bare, solid wire for the GMAW of creep-resistant steels of the same composition, like those used for […]
ESAB FRANCE SAS
OK AristoRod 13.09 0.8mm 15kg
ESAB FRANCE SAS
OK AristoRod 13.09 is a 0.5Mo-alloyed, bare, solid wire for the GMAW of creep-resistant steels of the same composition, like those used for pipes in […]
ESAB FRANCE SAS
OK AristoRod 13.08 1.0mm 18kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 13.08 is a ER80S-D2 classified, manganese-molybdenum (1,6% Mn, 0,4% Mo), solid wire for GMAW of creep resistant […]
ESAB FRANCE SAS
OK AristoRod 12.63 0.8mm 15kg
ESAB FRANCE SAS
OK AristoRod 12.63 is a bare Mn-Si-alloyed G4Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive […]
ESAB FRANCE SAS
OK AristoRod 12.50 0.8mm 15kg
ESAB FRANCE SAS
OK Aristorod 12.50 is a bare Mn-Si-alloyed G3Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive […]
ESAB FRANCE SAS
OK Tigrod 13.16 1.6x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.16 is a 1.3Cr-0.5Mo-alloyed (ER80S-B2), copper-coated rod for the GTAW of creep-resistant steels like SA-387 Grade 11, A 335 Grade P11 or […]
ESAB FRANCE SAS
OK Flux 10.74 25kg(55lb)
ESAB FRANCE SAS
OK Flux 10.74 is an agglomerated, basic flux designed primarily for multi-wire procedures in the production of longitudinal welded line pipes. The […]
ESAB FRANCE SAS
OK Flux 10.33 25 kg(55lb)
ESAB FRANCE SAS
Agglomerated fluoride-basic flux designed primarily for surfacing of continuous casting rollers, using cored wires with single- or twin-arc technique […]
ESAB FRANCE SAS
OK Autrod 12.58 0.8mm 15kg
ESAB FRANCE SAS
A copper coated, G2Si/ER70S-3 solid wire for GMAW of all general structural and engineering unalloyed and low-alloyed carbon-manganese steels. The […]
ESAB FRANCE SAS
FILARC PZ6113 1.0mm 12kg
ESAB FRANCE SAS
A multi-purpose all positional rutile cored wire for use with C1 or M21 shielding gas.
ESAB FRANCE SAS
Shield-Bright NiCrMo-3 15kg
ESAB FRANCE SAS
A positional rutile wire for the welding of Ni-Cr-Mo-Nb alloys super stainless steels and 9% Ni steels for cryogenic service. It has <1% Fe for […]
ESAB FRANCE SAS
Exaton 79S 25kg bucket
ESAB FRANCE SAS
Exaton 79S is a newly designed highly basic, agglomerated flux for electroslag strip cladding delivering excellent slag removal and bead appearance. […]
ESAB FRANCE SAS
Exaton 27.7.5.L 0.8mm X 15kg
ESAB FRANCE SAS
Exaton 27.7.5.L is a hyper-duplex (austenitic-ferritic) filler metal with improved yield strength and better pitting and crevice corrosion resistance […]
ESAB FRANCE SAS
Exaton 25.10.4.L 0.8mm X 15kg
ESAB FRANCE SAS
Exaton 25.10.4.L is used for welding of Sandvik SAF 2507 and other super-duplex steels. The grade is characterized by excellent resistance to stress […]
ESAB FRANCE SAS
Exaton 22.8.3.L 0.8mm X 1kg
ESAB FRANCE SAS
Exaton 22.8.3.L is used for welding of duplex stainless steels such as Sandvik SAF 2205 and SAF 2304. It can also be used for welding of duplex […]
ESAB FRANCE SAS
OK Tigrod 308H 2.0x1000mm 5kg
ESAB FRANCE SAS
Bare corrosion resisting chroumium-nickel rods for welding of austenitic chromium nickel alloys of 18 % Cr - 8 % Ni-type. OK Tigrod 308H has a good […]
ESAB FRANCE SAS
OK Tigrod 347 1.6x1000mm 5kg
ESAB FRANCE SAS
Bare corrosion resisting chromium-nickel rods for welding of stabilized austenitic chromium nickel alloys of 18% Cr - 8% Ni-type. The rods are […]
ESAB FRANCE SAS
OK Tigrod 309MoL 2.0x1000 5kg
ESAB FRANCE SAS
Bare, corrosion-resistant rod of 309LMo type. OK Tigrod 309MoL is used for the overlay welding of unalloyed and low-alloyed steels and for welding […]
ESAB FRANCE SAS
OK Tigrod 410NiMo 1.6x1000 5kg
ESAB FRANCE SAS
Bare welding rods of "410NiMo" type alloyed with 13 % Cr, 4.5 % Ni and 0.5 % Mo. This alloy is used for welding of similar martensitic and […]
ESAB FRANCE SAS
OK Tigrod 5087 2.4x1000mm 2.5k
ESAB FRANCE SAS
Bare welding rod suitable for welding of aluminium alloys with up to 5 % Mg and alloys where a higher tensile strength is required. The alloying […]
ESAB FRANCE SAS
Dual Shield CrMo2 1.2mm 16kg V
ESAB FRANCE SAS
An all-positional rutile cored wire which contains 2Cr 1Mo. Designed for use with argon + 15-25% carbon dioxide shielding gas.
ESAB FRANCE SAS
Dual Shield 62 1.2mm 16kg
ESAB FRANCE SAS
An all-positional rutile cored wire for welding steels with a minimum yield strength of 620 MPa, for use with M21 shielding gas.
ESAB FRANCE SAS
Dual Shield 55 1.2mm 16kg
ESAB FRANCE SAS
An all-positional rutile cored wire for welding steels with a minimum yield strength of 550 MPa, for use with M21 shielding gas.
ESAB FRANCE SAS
Coreweld 89 1.2mm 16kg VP
ESAB FRANCE SAS
A metal cored wire for high strength applications (>890 MPa) developed for use with argon / carbon dioxide shielding gas. Optimal mechanical and […]
ESAB FRANCE SAS
OK Autrod 4047 1.0 mm 7 Kg
ESAB FRANCE SAS
OK Autrod 4047 was originally developed as a brazing alloy to take advantage of its low melting point and narrow freezing range. In addition, it has a […]
ESAB FRANCE SAS
OK Autrod 5356 0.8mm 6kg
ESAB FRANCE SAS
OK Autrod 5356 is the most widely used welding alloy and can be classified as a general purpose type filler alloy. OK Autrod 5356 is typically chosen […]
ESAB FRANCE SAS
OK Autrod 5356 1.2mm 25kg
ESAB FRANCE SAS
OK Autrod 5356 is the most widely used welding alloy and can be classified as a general purpose type filler alloy. OK Autrod 5356 is typically chosen […]
ESAB FRANCE SAS
OK Autrod 5183 1.0mm 5x2kg
ESAB FRANCE SAS
OK Autrod 5183 was developed to provide the highest strengths possible in the as welded condition of alloy AA 5083 and other similar high magnesium […]
ESAB FRANCE SAS
OK Autrod 430LNb 0.8mm 15kg
ESAB FRANCE SAS
A continous ferritic stainless solid wire with low carbon content, 18 % Cr and stabilized with Nb, for welding similar and matching steels. OK Autrod […]
ESAB FRANCE SAS
OK Autrod 430LNb 1.0mm 100kg
ESAB FRANCE SAS
A continous ferritic stainless solid wire with low carbon content, 18 % Cr and stabilized with Nb, for welding similar and matching steels. OK Autrod […]
ESAB FRANCE SAS
OK Autrod 4043 1.0mm 7kg
ESAB FRANCE SAS
OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classed as a general purpose filler alloy. The silicon additions […]
ESAB FRANCE SAS
OK Autrod 385 2.4mm 25kg
ESAB FRANCE SAS
A continous solid corrosion resisting chromium-nickel-molybdenum-copper wire for welding of austenitic stainless alloys of 20% Cr, 25% Ni, 5% Mo, 1,5% […]
ESAB FRANCE SAS
OK Autrod 347 1.6mm 25kg
ESAB FRANCE SAS
A continuous solid corrosion resisting chromium-nickel wire for the welding of austenitic chromium nickel alloys of the 18% Cr - 8% Ni type. OK Autrod […]
ESAB FRANCE SAS
OK Autrod 318 2.4mm 25kg
ESAB FRANCE SAS
OK Autrod 318 is an extra low carbon, stainless wire for the submerged arc welding of corrosion-resistant steels of the 18Cr12Ni3Mo type, such as AlSi […]
ESAB FRANCE SAS
OK Autrod 318 3.2mm 25kg
ESAB FRANCE SAS
OK Autrod 318 is a Nb-stabilized SAW-wire for welding stainless steels being included in AISI 316 group (i.e. 316Ti) when higher resistance to […]
ESAB FRANCE SAS
OK Autrod 316L 1.2mm 15kg
ESAB FRANCE SAS
A continous solid corrosion resisting chromium-nickel-molybdenum wire for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni […]
ESAB FRANCE SAS
OK Autrod 316L 4.0mm 25kg
ESAB FRANCE SAS
A continous solid corrosion resisting chromium-nickel-molybdenum wire for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 8% Ni […]
ESAB FRANCE SAS
OK Autrod 312 1.0mm 15kg
ESAB FRANCE SAS
A continuous, solid, corrosion-resistant, chromium-nickel wire for welding stainless steels of the 29% Cr, 9% Ni types. OK Autrod 312 has good […]
ESAB FRANCE SAS
OK Autrod 309MoL 1.0mm 15kg
ESAB FRANCE SAS
A continuous solid corrosion resisting wire of "309LMo" type. OK Autrod 309MoL is used for overlay welding of unalloyed and low alloyed […]
ESAB FRANCE SAS
OK Autrod 309L 0.8mm 15kg
ESAB FRANCE SAS
A continuous, solid, corrosion resisting chromium-nickel wire for welding of similar steels, wrought and cast steels of 23% Cr-12% Ni types. The alloy […]
ESAB FRANCE SAS
OK Autrod 308L 1.0mm 15kg
ESAB FRANCE SAS
A continuous solid corrosion resisting chromium-nickel wire. OK Autrod 308L has a good general corrosion resistance.The alloy has a low carbon content […]
ESAB FRANCE SAS
OK Autrod 2209 2.4mm 25kg
ESAB FRANCE SAS
A continous solid corrosion resisting Duplex wire for welding of austenitic-ferritic stainless alloys of 22% Cr, 5% Ni, 3% Mo types. OK Autrod 2209 […]
ESAB FRANCE SAS
OK Autrod 16.97 3.2mm 25kg
ESAB FRANCE SAS
OK Autrod 16.97 is a submerged arc wire 18% Cr, 8% Ni, 6% Mn type used in a wide range of applications troughout industry, such as joining […]
ESAB FRANCE SAS
OK Autrodur 56 G M 1.0mm 15kg
ESAB FRANCE SAS
A copper coated, low-alloyed solid GMAW wire used for hard facing and building up highly wear resistant layers on tools and machinery parts, driving […]
ESAB FRANCE SAS
OK Autrod 13.28 0.8mm 15kg
ESAB FRANCE SAS
A copper coated, Ni-alloyed (2,4% Ni), solid wire for GMAW of low-alloyed and low temperature steels in applications such as vessels, pipes and in the […]
ESAB FRANCE SAS
OK Autrod 12.64 0.8mm 15kg
ESAB FRANCE SAS
OK Autrod 12.64 is a copper-coated, Mn-Si-alloyed G4Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, […]
ESAB FRANCE SAS
OK Autrod 12.64 0.8mm 200kg
ESAB FRANCE SAS
A copper coated, G4Si1/ER70S-6 solid wire for GMAW of general structural and engineering unalloyed and low-alloyed carbon-manganese steels. Compared […]
ESAB FRANCE SAS
OK AristoRod 89 1.2mm 18kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 89 is a low-alloyed, chromium-nickel-molybdenum (0,4% Cr, 2,2% Ni, 0,55% Mo), solid wire for GMAW of ultra high […]
ESAB FRANCE SAS
OK AristoRod 12.57 1.0mm 18kg
ESAB FRANCE SAS
OK AristoRod 12.57 is a bare Mn-Si-alloyed G2Si/ER70S-3 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive […]
ESAB FRANCE SAS
OK Tubrodur 35 S M 2.4mm 300kg
ESAB FRANCE SAS
OK Tubrodur 15.40S is a flux-cored wire for SAW hardfacing in conjunction with OK Flux 10.71, depositing a manganese-chromium-molybdenum-alloyed weld […]
ESAB FRANCE SAS
OK Tubrod 15.27 1.2mm 16kg
ESAB FRANCE SAS
A basic cored wire for welding steels with a minimum yield strength of 690 MPa for use with Ar/CO2 shielding gas.
ESAB FRANCE SAS
OK Tigrod 19.49 1.6x1000mm 5kg
ESAB FRANCE SAS
Bare Cu-Ni rods for welding similar alloys, such as 90Cu10Ni, 80Cu20Ni and 70Cu30Ni alloys. The addition of nickel strengthens the weld metal and […]
ESAB FRANCE SAS
OK Tigrod 19.49 2.4x1000mm 5kg
ESAB FRANCE SAS
Bare Cu-Ni rods for welding of similar alloys like 90Cu10Ni-, 80Cu20Ni- and 70Cu30Ni-alloys. The nickel addition strengthens the weld metal and […]
ESAB FRANCE SAS
OK Autrod 19.49 1.2mm 15kg
ESAB FRANCE SAS
A continuous, solid, Cu-Ni wire for welding similar alloys like 90Cu10Ni, 80Cu20Ni and 70Cu30Ni alloys. The addition of nickel strengthens the weld […]
ESAB FRANCE SAS
OK Tigrod 12.61 1.6x1000mm 5kg
ESAB FRANCE SAS
A copper coated, manganese-silicon alloyed rod for GTAW of all general engineering and structural steels with a minimum yield strength of max 420 MPa. […]
ESAB FRANCE SAS
OK AristoRod 38 Zn 0.8mm 200kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 38 Zn is a manganese-silicon alloyed solid wire for GMAW of galvanised steels with an outstanding performance in […]
ESAB FRANCE SAS
Purus 42 0.8mm 200kg
ESAB FRANCE SAS
A copper coated, G3Si1/ER70S-6 solid wire for GMAW of carbon-manganese steels. Purus 42 is particularly suited to be used in general construction, […]
ESAB FRANCE SAS
Coreweld 46 LS 1.2mm 16kg
ESAB FRANCE SAS
A metal cored wire which gives a very low amount of silica on the weld surface. Designed for welding thin plate (>1mm) as well as thicker […]
ESAB FRANCE SAS
DS Prime 81Ni1M H4 1.2mm15kgVP
ESAB FRANCE SAS
A seamless, copper free, cored wire designed to weld thick steel components The diffusible hydrogen level is consistently below 4ml/100g of deposited […]
02/08/2023 -
Bonjour, Merci de nous faire un devis urgent de: -02 TONES DE PRODUIT ESAB OK FLUX 10.71 sac de 25 kg - 02 tones de OK Autrod 318 3.2mm 25kg NB; La livraison se fera à Paris /France . au aux Aubervilliers chez GLS Merci de préciser le coût de transport le délais de livraison et le poids du colis Pour le compte de 2IS SARL Contact ; +225 0777720067 Interlocuteur : Louis Modeste IRAOU
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
