All you need to run your factory !
Sub-category +
Welding equipment (575)
Saws, Chain saws (43)
Rotary hammer drills (18)
Generator sets (12)
Power drills (10)
Grinders (6)
Nailing tools (1)
Top Brands
Star categories
Products (797)
Products from 1 to 80 of 797
Prevost
Compressed air hose reel / automatic / safety retracting | DRFB
Prevost
These Reels with controlled hose return with the yellow travel limit stop are designed to operate at a Pressure of P.N. 12 bar and a Temperature of […]
Prevost
Spraygun for cleaning | BG SODA1 - BG SPRAY1 - BG SAND1
Prevost
The spray gun's compact design makes it easy to manoeuvre for cleaning jobs. The progressive trigger, the possibility of adjusting the […]
Prevost
Blow guns - prevoS1
Prevost
Users will appreciate the prevo S1 blowguns in their daily operations, for their ease of use. These blowguns, equipped with PREVOST plugs, are […]
CABLE EQUIPEMENTS
Fork adaptor
CABLE EQUIPEMENTS
Essential for loading and unloading the reel rack safely. The forklift must have : - sufficient lifting height - sufficient fork spacing, […]
CABLE EQUIPEMENTS
Unwinder in front of coiling machines AXO 6 TONS
CABLE EQUIPEMENTS
Hydraulic jacks for really big drums The AXO 6 TONS is intended for unwinding large cable drums on construction sites or in workshops. Composed by two […]
CABLE EQUIPEMENTS
Coiling machines on cable drum and coil- CD40M3-BM2- Max Ø 2600 mm / 6000 kg
CABLE EQUIPEMENTS
CD40M3-BM2 Product sheet not available in your language You’ll find the product information in other languages: French version
ESAB FRANCE SAS
OK Flux 10.33 25 kg(55lb)
ESAB FRANCE SAS
Agglomerated fluoride-basic flux designed primarily for surfacing of continuous casting rollers, using cored wires with single- or twin-arc technique […]
ESAB FRANCE SAS
OK Autrod 12.51 0.6mm 5kg
ESAB FRANCE SAS
A copper coated, G3Si1/ER70S-6 solid wire for GMAW of all general structural and engineering unalloyed and low-alloyed carbon-manganese steels. The […]
ESAB FRANCE SAS
OK Tigrod 12.61 1.6x1000mm 5kg
ESAB FRANCE SAS
A copper coated, manganese-silicon alloyed rod for GTAW of all general engineering and structural steels with a minimum yield strength of max 420 MPa. […]
GELEC ENERGY
Diesel electric generators in containers
GELEC ENERGY
Diesel electric generators in containers
GELEC ENERGY
45 kVA diesel generator - JAGUAR-45YC
GELEC ENERGY
GENERAL DATAS : PRP : Prime Rated Power : 41 kVA / 33 kW ESP : Emergency Standby Power : 45 kVA / 36 kW Voltage : 230-400V Power factor : 0.8 […]
GELEC ENERGY
55 kVA diesel generator - JAGUAR-55YC
GELEC ENERGY
GENERAL DATAS : PRP : Prime Rated Power : 50 kVA / 40 kW ESP : Emergency Standby Power : 55 kVA / 44 kW Voltage : 230-400V Power factor : 0.8 […]
MECATRACTION
Heat gun for heat-shrink tubing
MECATRACTION
Heat gun with 3-stage temperature switch. ✔ Adjustable temperature and air flow control when in use. ✔ Our heat gun offers a variety of possible […]
GYS
AUTOPULSE 320-T3
GYS
AUTOPULSE 320-T3 is a digital MIG/MAG double pulse generator with 3 integrated wire feeders. It is an extremely advanced machine with 46 synergic […]
GYS
TITAN 400 DC TIG & MMA
GYS
The perfect solution for accurate welding of high alloy metals, the TITAN 400 power source with its high duty cycle (400 A @ 60 %) is designed for the […]
SES-STERLING SA
Soldering wire in tin and copper
SES-STERLING SA
This wire is lead free, it gets an excellent absorptivity on copper, galvanized copper, brass and nickel. Taking into account the nature of metals […]
SES-STERLING SA
Desoldering tools
SES-STERLING SA
Instructions for use : • Allow the solder to melt at the connection with a soldering iron • Activate the desoldering tool by pressing the […]
SES-STERLING SA
Hot air gun - HL 1610 S Standard
SES-STERLING SA
• Temperature: 300°C (fixed position)/500°C (fixed position) • Volume air: 240 l/min (fixed position)/500 l/min (fixed position) […]
STOPPIL
Manual Screwers EB 55
STOPPIL
Flexibility of use Quick changeover Made-to-measure screwing head Screwing technology Electrical or pneumatical Equipment Stainless steel mast with […]
LK Distribution
Mechanical hose reel | Worky
LK Distribution
The spring recoil hose reels are one of WORKY's leading products and are distinguished by the following details: very tough steel powder-painted […]
LK Distribution
Mechanical reel with fan | Worky
LK Distribution
The spring recoil hose reels are one of WORKY's leading products and are distinguished by the following details: very tough steel powder-painted […]
LK Distribution
Motor driven hose reel with fan and remote control | Worky
LK Distribution
The electrically rewound hose reels have a 230V single-phase motor for unwinding and rewinding the hose that is already mounted on the cylinder. The […]
LISSMAC
Masonry Saws - ATS 350 B 120
LISSMAC
Exclusive use of aluminium, stainless steel and plastic makes the ATS masonry saw exceptionally light, sturdy, and virtually rust free. Suitable both […]
LISSMAC
Floor saws - COMPACTCUT 300 E
LISSMAC
The COMPACTCUT 300 series is especially fast and flexible in its application and covers a wide ranging spectrum of sawing tasks. The compact and […]
LISSMAC
Wall saws | LWSE 800
LISSMAC
Electric wall saws for universal applications and everyday use on the construction site Description : Both installation and dislocation are […]
APM SAS
Strip nails 20° screw hot galvanized 145mm : PB2046145TG
APM SAS
Strip nails 20° screw hot galvanized 46x145mm compatible with Bea R20, Bostitch KN RN, Duofast CN, Haubold R20, Alsafix RB, Hitachi NR, Holzher […]
APM SAS
Coil Nailers
APM SAS
Features ?Ergonomic Design, Well Balanced ?Powerful, Rapid Nailing Performance ?360° Adjustable Exhaust Port ?Body Protectors Equipped […]
APM SAS
Air drive - Carton closing stapler - 35/22 : AgPNBO3522
APM SAS
Air drive carton closing stapler - Effortless stapling action ideally suited for long production runs - Robust and durable carton closing stapler for […]
WITT FRANCE SARL
Hose Reel DS Automatic
WITT FRANCE SARL
For fuel gases and oxygen for a safe and orderly workplace gas supply secure locking of the retraction mechanism helps reduce tension exerted on hose […]
ESAB FRANCE SAS
OK Tigrod 13.16 1.6x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.16 is a 1.3Cr-0.5Mo-alloyed (ER80S-B2), copper-coated rod for the GTAW of creep-resistant steels like SA-387 Grade 11, A 335 Grade P11 or […]
ESAB FRANCE SAS
OK Autrod 13.17 1.0mm 15kg
ESAB FRANCE SAS
OK Autrod 13.17 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated, solid wire for the GMAW of creep-resistant steels like SA-387 Grade 22, A335 Grade […]
ESAB FRANCE SAS
OK Tigrod 13.17 2.0x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.17 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated rod for the GMAW of creep-resistant steels like SA-387 Grade 22, A335 Grade P22 or […]
ESAB FRANCE SAS
OK Autrod 13.23 1.0mm 15kg
ESAB FRANCE SAS
A copper coated, Ni-alloyed (0,9% Ni), solid wire for GMAW of low-temperature fine-grained steels. The wire provides good impact toughness down to -50 […]
ESAB FRANCE SAS
OK Tigrod 13.37 1.6x1000mm 5kg
ESAB FRANCE SAS
OK Tigrod 13.37 is a 9Cr-1Mo-alloyed, copper-coated rod for the GTAW of high temperature steels and steels for hot hydrogen service, especially in oil […]
ESAB FRANCE SAS
OK Tigrod 410NiMo 1.6x1000 5kg
ESAB FRANCE SAS
Bare welding rods of "410NiMo" type alloyed with 13 % Cr, 4.5 % Ni and 0.5 % Mo. This alloy is used for welding of similar martensitic and […]
ESAB FRANCE SAS
OK Tigrod 5554 2.4mm 2.5kg
ESAB FRANCE SAS
OK Tigrod 5554 is a solid aluminium rod with a content of 2,7% Mg. It´s recommended for welding of AlMg alloys like 5454. Typical applications […]
ESAB FRANCE SAS
OK Tigrod 19.49 2.4x1000mm 5kg
ESAB FRANCE SAS
Bare Cu-Ni rods for welding of similar alloys like 90Cu10Ni-, 80Cu20Ni- and 70Cu30Ni-alloys. The nickel addition strengthens the weld metal and […]
ESAB FRANCE SAS
OK AristoRod 12.63 0.8mm 15kg
ESAB FRANCE SAS
OK AristoRod 12.63 is a bare Mn-Si-alloyed G4Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive […]
ESAB FRANCE SAS
OK AristoRod 38 Zn 0.8mm 200kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 38 Zn is a manganese-silicon alloyed solid wire for GMAW of galvanised steels with an outstanding performance in […]
ESAB FRANCE SAS
OK AristoRod 13.12 0.8mm 15kg
ESAB FRANCE SAS
OK AristoRod 13.12 is a 1.1Cr-0.5Mo-alloyed, bare, solid wire for the GMAW of creep-resistant steels of the same composition, like those used for […]
ESAB FRANCE SAS
OK AristoRod 13.26 0.8mm 15kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 13.26 is a low-alloyed, nickel-copper (0,8% Ni, 0,45% Cu), solid wire for GMAW of weathering steels, such as […]
ESAB FRANCE SAS
OK AristoRod 69 0.8mm 15kg
ESAB FRANCE SAS
The non copper coated OK AristoRod 69 is a low-alloyed, chromium-nickel-molybdenum (0,3% Cr, 1,4% Ni, 0,25% Mo), solid wire for GMAW of high tensile […]
ESAB FRANCE SAS
FILARC PZ6113 1.0mm 12kg
ESAB FRANCE SAS
A multi-purpose all positional rutile cored wire for use with C1 or M21 shielding gas.
ESAB FRANCE SAS
Dual Shield CrMo2 1.2mm 16kg V
ESAB FRANCE SAS
An all-positional rutile cored wire which contains 2Cr 1Mo. Designed for use with argon + 15-25% carbon dioxide shielding gas.
ESAB FRANCE SAS
Dual Shield 55 1.2mm 16kg
ESAB FRANCE SAS
An all-positional rutile cored wire for welding steels with a minimum yield strength of 550 MPa, for use with M21 shielding gas.
ESAB FRANCE SAS
Dual Shield 62 1.2mm 16kg
ESAB FRANCE SAS
An all-positional rutile cored wire for welding steels with a minimum yield strength of 620 MPa, for use with M21 shielding gas.
ESAB FRANCE SAS
FILARC C23S 3.2x450mm
ESAB FRANCE SAS
A rutile iron powder electrode with a high rate of deposition, high metal recovery, easy contact welding, easy slag removal, and an excellent weld […]
ESAB FRANCE SAS
OK 43.32 2.0x300mm
ESAB FRANCE SAS
Easy-to-weld rutile type electrode for welding in the flat position. The good flowing properties of the weld metal give a good finish to the weld […]
ESAB FRANCE SAS
OK 46.00 1.6x300mm
ESAB FRANCE SAS
OK 46.00 is an excellent performing, easy to use, rutile electrode and is relatively insensitive to rust or other surface impurities. It deposits […]
ESAB FRANCE SAS
OK 46.00 2.5x350mm
ESAB FRANCE SAS
OK 46.00 is the best, all-round, rutile electrode and it is relatively insensitive to rust or other surface impurities. It deposits smooth weld beads […]
ESAB FRANCE SAS
OK 46.16 2.0x300mm
ESAB FRANCE SAS
OK 46.16 is an all positional, rutile electrode for welding mild steels. It gives less spatter than most other rutile electrodes, the slag is easy to […]
ESAB FRANCE SAS
Filarc 48 2.5x350mm
ESAB FRANCE SAS
General purpose rutile all-positional electrode with particularly satisfying results in the overhead welding of fillet welds, lap joints and sealing […]
ESAB FRANCE SAS
OK 53.05 2.5x350mm 1/2 VP
ESAB FRANCE SAS
A low-hydrogen electrode with excellent running characteristics and very good mechanical properties. Because of its double coating, it creates a deep […]
ESAB FRANCE SAS
OK 61.85 2.5x300mm 1/4 VP
ESAB FRANCE SAS
OK 61.85 is a basic Nb-stabilized electrode designed for welding of Nb- or Ti-stabilized stainless steels of the 19Cr10Ni-type. It has very good […]
ESAB FRANCE SAS
OK 63.20 2.0x300mm 1/4 VP
ESAB FRANCE SAS
Rutile coated electrode for welding 18Cr12Ni3Mo-type steels. Also suitable for welding stabilized steels of similar composition. The electrode is […]
ESAB FRANCE SAS
OK 63.35 2.5x300mm 1/4 VP
ESAB FRANCE SAS
OK 63.35 is a low carbon stainless steel electrode with basic coating of the 18Cr12Ni3Mo type. It is suitable for applications where the mechanical […]
ESAB FRANCE SAS
OK 63.85 2.5x300mm 1/4 VP
ESAB FRANCE SAS
Basic MMA-electrode for welding Nb-stabilized stainless steels of 18Cr 12Ni 3Mo-type.
ESAB FRANCE SAS
OK 67.53 3.2x350mm 1/2 VP
ESAB FRANCE SAS
Thin coated rutile MMA-electrode especially designed for pipe welding of duplex stainless steel. i.e. UNS S31803, CrNiMoN22-5-3, CrNiN23-4. Ideal for […]
ESAB FRANCE SAS
OK 67.60 2.0x300mm
ESAB FRANCE SAS
Acid-rutile coated MMA-electrode giving an overalloyed weld metal. Suitable for welding stainless steel to mild and low alloyed steels. Also suitable […]
ESAB FRANCE SAS
OK 68.17 2.5x350mm 1/4 VP
ESAB FRANCE SAS
OK 68.17 is a coated electrode designed for the welding of stainless-steel castings of the 13Cr4NiMo type, for example. OK 68.17 can be welded in all […]
ESAB FRANCE SAS
OK 68.55 2.5x300mm 1/4 VP
ESAB FRANCE SAS
OK 68.55 is a basic coated electrode for welding austenitc-ferritic steels of the Super Duplex type, e. g. SAF 2507 and Zeron 100. OK 68.55 deposits a […]
ESAB FRANCE SAS
OK 69.33 2.5x300mm 1/4 VP
ESAB FRANCE SAS
OK 69.33 is a stainless-steel electrode which deposits a fully austenitic weld metal with increased resistance to sulphuric acid. The weld metal of OK […]
ESAB FRANCE SAS
OK 73.15 3.2x350mm 1/2 VP
ESAB FRANCE SAS
OK 73.15 is a basic electrode with very good welding characteristics. Its exceptional weldability is ideal for multiple applications including Pipe. […]
ESAB FRANCE SAS
OK 73.79 2.5 X 350 1/4 VP
ESAB FRANCE SAS
OK 73.79 is a nickel-alloyed, LMA electrode for welding 3.5 Ni steel with impact requirements down to -101°C. It is used, for example, for ethane […]
ESAB FRANCE SAS
OK 74.78 2.5x350mm 1/4 VP
ESAB FRANCE SAS
OK 74.78 is an LMA electrode suitable for welding high tensile steels used in low-temperature applications. Good notch toughness down to -40°C. […]
ESAB FRANCE SAS
OK 75.75 2.5x350mm 1/4 VP
ESAB FRANCE SAS
OK 75.75 is an LMA electrode dried to a very low moisture content and suitable for the welding of high-strength, low-alloyed steels, at room […]
ESAB FRANCE SAS
OK 75.78 4.0x450mm 1/2 VP
ESAB FRANCE SAS
This electrode is tailored for steels with very high tensile strength. The electrode gives tensile strength over 900 N/mm2 and impact values over 47 J […]
ESAB FRANCE SAS
OK 76.16 2.5x350mm 1/2 VP
ESAB FRANCE SAS
Basic DC low hydrogen electrode for welding creep resisting steels of the type 1.25 % Cr 0.5 % Mo.
ESAB FRANCE SAS
OK 76.18 2.5x300mm 1/4 VP
ESAB FRANCE SAS
OK 76.18 is an LMA electrode for welding creep-resistant steels of the 1.Cr0.5Mo type. The electrode welds with a quiet, stable arc and produces a […]
ESAB FRANCE SAS
OK 76.98 2.5x350mm 1/4 VP
ESAB FRANCE SAS
OK 76.98 is a low-hydrogen electrode for welding modified 9 Cr steels like T91/P91. The electrode is suitable for all-positional welding in pipes and […]
ESAB FRANCE SAS
FILARC 88S 2.5x350mm 1/4 VP
ESAB FRANCE SAS
CTOD-tested, all-positional, basic AC/DC electrode with 100% recovery for offshore fabrication. Alloyed with max 1% Ni. Good CVN toughness down to […]
ESAB FRANCE SAS
OK Weartrode 55 3.2x450mm
ESAB FRANCE SAS
A general purpose hardfacing electrode depositing a semi corrosion resistant martensitic steel with a hardness of about 57 HRC. The electrode is […]
ESAB FRANCE SAS
OK 76.35 2.5x300mm 1/4 VP
ESAB FRANCE SAS
OK 76.35 is an LMA electrode containing 5Cr0.5Mo for welding creep-resistant steels. It is especially suitable for pipe welding. The electrode runs […]
ESAB FRANCE SAS
OK 76.28 2.5x300mm 1/4 VP
ESAB FRANCE SAS
Basic DC electrode for welding creep-resisting steels of the type 2.25 % Cr and 1 % Mo.
ESAB FRANCE SAS
OK 76.18 2.0x300mm 1/4 VP
ESAB FRANCE SAS
Basic DC electrode for welding creep resisting steels of the type 1% Cr 0.5% Mo. Welds with a stable arc and minimum spatter. Deposits weld metal […]
ESAB FRANCE SAS
OK 75.75 3.2x450mm 1/2 VP
ESAB FRANCE SAS
OK 75.75 is an LMA electrode dried to a low moisture content and suitable for the welding of high-strength, low-alloyed steels, at room temperature or […]
ESAB FRANCE SAS
OK 74.86 Tensit. 2.5x350 1/4VP
ESAB FRANCE SAS
A basic coated electrode for steels and castings with U.T.S. of min. 690 MPa.
ESAB FRANCE SAS
OK 74.86 Tensit. 3.2x450 1/2VP
ESAB FRANCE SAS
A basic coated electrode for steels and castings with U.T.S of min 690 MPa.
Users who saw this also viewed
15/01/2025 -
To Whom it may concern, please forward documentation for GRM manual balancers. Kind regards, Intelligent Mechatronics, toolshop
10/10/2024 -
Demande de devis: Enrouleurs manuels
27/08/2024 -
Can you please make qoute for the asked product?
19/06/2024 -
Hello Industry Plaza! I'm looking for the compressed air hose reel c/w the air hose and plug in adapters attached. So everything in one set. The hose supposed to be rated for 1.6 MPa, hose length 14-17 m. Could you give me the options? Best regards, Mikhail
21/05/2024 -
I need to order new contact tips
14/05/2024 -
Demande de devis pour Enrouleur manuel
15/02/2024 -
Hi please can you give me a quote for LIGHT 220 and LIGHT 220R and also delivery
20/01/2024 -
Demande de devis pour Location poste onduleur
14/09/2023 -
Hello, How deep is the throat of this tool?
02/08/2023 -
Bonjour, Merci de nous faire un devis urgent de: -02 TONES DE PRODUIT ESAB OK FLUX 10.71 sac de 25 kg - 02 tones de OK Autrod 318 3.2mm 25kg NB; La livraison se fera à Paris /France . au aux Aubervilliers chez GLS Merci de préciser le coût de transport le délais de livraison et le poids du colis Pour le compte de 2IS SARL Contact ; +225 0777720067 Interlocuteur : Louis Modeste IRAOU
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment - Safety and Security
