CATALOGUES
WHITE PAPERS
PRESS RELEASES
...
Flat bars
Size programme Hot rolled flat bars are delivered in widths from 15 mm to 250 mm and in thicknesses […]
Find out more
Peeled bars
Lengths The most common length is 6 m, but it can be varied between 3 and 13,6 metres depending on the […]
Ground bars
Size programme and tolerances Lengths The most common length is 6 m, but it can be varied between […]
Drawn bars
Drawn bars are made from hot rolled wire rod or, if surface defect free bars are needed, of surface […]
Round Corner Squares
Round corner square bars are delivered in the as rolled stage. The bars have rounded edges, the radius […]
Threaded bars
Threaded bars are supplied according to ASTM A 193 Grades B7 and B16ASTM A 320 Grade L7 The dimension […]
Hot rolled round bars
Size programme Hot rolled round bars are delivered in diameters from Ø14 to 200 mm as standard. […]
Preprocessed blanks and components
We have resources to produce blanks at our works and steel service centers. Typical operations are -cut […]
Hot rolled tubes
Our tubes are hot rolled in the Assel process. This technology gives close tolerances throughout the […]
Hot rolled, Q&T tube
Outer diameter tolerance +/- 0.75 % of the outer diameter, min. +/- 0.6 mm. Wall thickness tolerance […]
Hot rolled peeled tubes
Dimensions (See size range diagram for Hot Rolled Tubes) Outer diameter > 55 mm […]
Cold worked tubes
The hot rolled tubes can be further processed by cold working. This is done either by cold rolling or […]
Tube components
Components made from tubes By choosing pre-components the customer can eliminate stockholding, cutting […]
Grinding media
Ovako supplies grinding rods and grinding balls for mining and minerals processing industry. Grinding […]
Buyers
Suppliers
All you need to run your factory !
