All you need to run your factory !
Linked categories +
Star categories
Products (474)
Products from 161 to 240 of 474
SYSTEAL
Black Anodized Thin Bracket for 10 mm slot aluminium profile
SYSTEAL
Black Anodized Thin Bracket for 10 mm slot aluminium profile
SYSTEAL
Corner fastening plate for 40x40 profile with 10mm slot
SYSTEAL
Corner fastening plate for 40x40 profile with 10mm slot Fixings included: - 4 M8 nuts for 10mm slot - 4 M8–15 screws
SYSTEAL
Tilting bracket for 40x40 profiles
SYSTEAL
Tilting bracket for 40x40 profiles with 8mm or 10mm slot Joins 2 profiles at any angle.
SYSTEAL
Tilting bracket for 45x45 profiles
SYSTEAL
Tilting bracket for 45x45 profiles with 10mm slot Joins 2 profiles at any angle.
SYSTEAL
Rounded Corner Bracket 3 ways for 10 mm slot 40x40 profile - Grey
SYSTEAL
Rounded Corner Bracket 3 ways for 10 mm slot 40x40 profile - Grey Slote size (mm) : 10 Charge admissible (N) : 3026
SYSTEAL
Inner fastening bracket for profile with 10mm slot
SYSTEAL
Inner fastening bracket for profile with 10mm slot The bracket slides into the inside of the profile (invisible bracket). Ensures an attractive […]
SYSTEAL
Double fastening plate for 45x45 profile with 10mm slot – With fixings
SYSTEAL
Double fastening plate for 45x45 profile with 10mm slot Joins together two parallel profiles. This item is reinforced in comparison with the single […]
SYSTEAL
Protective cap for 20x20 profiles with 6mm slot (D:4.2mm) – Black
SYSTEAL
Protective cap for 20x20 profiles with 6mm slot (Ø4.2mm) – Black Only compatible with profiles with a central hole of diameter […]
SYSTEAL
End Caps 20x20 6 mm slot profile - Grey
SYSTEAL
End Caps 20x20 6 mm slot profile - Grey (for Ø4.2 mm core holes)
SYSTEAL
Angle 60° End Cap 20x20 6 mm slot profile - black
SYSTEAL
Angle 60° End Cap 20x20 6 mm slot profile - Black Slote size (mm) : 6
SYSTEAL
Bracket for 8mm slot 30x30 profile
SYSTEAL
Bracket for 8mm slot 30x30 profile Optionnal fittings: - 2 nut M6 for 8 mm slot - 2 screws M6x12
SOPRIMA
Plastic Fasteners
SOPRIMA
Based on our long term experience with the plastics industry we propose a large range of fixations adapted to your type of material and method of […]
SOPRIMA
Standard Inserts for Plastics
SOPRIMA
Based on our long term experience with the plastics industry we propose a large range of fixations adapted to your type of material and method of […]
SOPRIMA
Special Plastic Inserts
SOPRIMA
For more than 10 years the INSERCO team develops specific fixation systems in cooperation with her customers from the automotive sector and other […]
SOPRIMA
Threadlocking and Sealing fasteners
SOPRIMA
INSERCO has special experience in the precoating domain which provides multiple supplementary functions to the fixation: adhesive bonding, anti- […]
NADELLA
Adjusting Nuts
NADELLA
The adjusting locking/unlocking nuts and rings are used whenever precision mechanisms require a precision clamping as well as a powerful and safe […]
CERGY-VIS
Spacers - Balls : Female Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Female Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Female Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : Female Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : Male Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Male Spacers - Nickel-Plated Brass
CERGY-VIS
Spacers - Balls : Male Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : Male Spacers - Zinc-Plated Steel
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - Non-hardened A2 Stainless Steel
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - Non-hardened A2 Stainless Steel
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - 60-66 HRC Hardened Steel - Hardened and Polished
CERGY-VIS
Spacers - Balls : DIN 5401 Balls - 60-66 HRC Hardened Steel - Hardened and Polished
MONTECH
Supporting profile TP-16-40 L=1000mm
MONTECH
This is a profile system that is compatible with all products. It is specifically designed for dynamic loads, but it is equally suitable as static […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing from stainless steel, with screw - EH 24420
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Disc-Type Handwheels DIN 3670 - EH 24570
HALDER FRANCE SAS
There are gripping indentations on the rear sides. Hub machined; rim turned and mirror-finished on all sides, non-machined surfaces cleanly blasted. […]
HALDER FRANCE SAS
Handwheels DIN 950 cast iron - EH 24580
HALDER FRANCE SAS
Hub machined; rim turned and mirror-finished on all sides, non-machined surfaces cleanly blasted. Material Handwheel Grey cast iron GG Machine handle […]
HALDER FRANCE SAS
Handwheels similar to DIN 950, stainless steel - EH 24591
HALDER FRANCE SAS
Hub machined; rim turned and mirror-finished on all sides, non-machined surfaces cleanly blasted. Material Handwheel Stainless steel A4 Machine handle […]
HALDER FRANCE SAS
Disc-Type Handwheels light metal - EH 24600
HALDER FRANCE SAS
There are gripping indentations on the rear sides. Hub machined; rim turned and mirror-finished on all sides; non-machined surfaces cleanly […]
HALDER FRANCE SAS
Spoked Handwheels light metal - EH 24610
HALDER FRANCE SAS
Hub machined; rim turned and mirror-finished on all sides; non-machined surfaces cleanly blasted.The non-machined, raw surfaces are blasted; together […]
HALDER FRANCE SAS
Index Plungers simple finish - EH 22120
HALDER FRANCE SAS
Application is limited to cases not requiring a precise positioning. Simple finish with very small dimensions. Material Body Steel, zinc-plated by […]
HALDER FRANCE SAS
Index Plungers compact with hexagon collar, with T-handle EH 22110
HALDER FRANCE SAS
Index plungers are used for indexing bores. Simple handling, e.g. when using safety gloves, with higher pull release. Types with / without lock have […]
HALDER FRANCE SAS
Index Plungers with mounting flange, horizontal - EH 22110
HALDER FRANCE SAS
Index plungers are used for indexing bores. Material Housing Zinc die-cast, plastic coated, black Locking pin Stainless steel 1.4305 Knob […]
HALDER FRANCE SAS
Index Plungers with hexagon collar, stainless steel - EH 22120
HALDER FRANCE SAS
Index plungers are used for indexing bores. Material Body Stainless steel 1.4305 Locking pin Stainless steel 1.4305, nickel-plated Knob Stainless […]
HALDER FRANCE SAS
Index Plungers with mounting flange - EH 22120
HALDER FRANCE SAS
Index plungers are used for indexing bores. For fixing onto thin walled parts. The small dimensions are a feature of these index plungers. Material […]
HALDER FRANCE SAS
Index Plungers with pull-ring EH 22120
HALDER FRANCE SAS
Index plungers are used for indexing bores. Material Body Steel, blackened Stainless steel 1.4305 Locking pin Stainless steel 1.4305, nickel-plated […]
HALDER FRANCE SAS
Index Plungers for thin-walled pieces EH 22120
HALDER FRANCE SAS
Index plungers with throughgoing bore for thin-walled pieces. Material Body Steel, zinc-plated by galvanization Locking pin Stainless steel 1.4305, […]
HALDER FRANCE SAS
Index Bolts EH 22120
HALDER FRANCE SAS
Index bolts are used for indexing purposes. Plastic cover for grip allows better handling. Material Body Free cutting steel, blackened Stainless steel […]
HALDER FRANCE SAS
Lateral Plungers with thread, without seal - EH 22150
HALDER FRANCE SAS
To be used for positioning and applying pressure, e.g. during painting and sandblasting. Material Body Steel, zinc-plated by galvanization Spring […]
HALDER FRANCE SAS
Lateral Plungers with thread, with seal - EH 22150
HALDER FRANCE SAS
To be used for positioning and applying pressure, e.g. during painting and sandblasting. Sealed against chips and dirt. Material Seal CR Body Steel, […]
HALDER FRANCE SAS
Lateral Plungers with thread, without seal, with female thread - EH 22150
HALDER FRANCE SAS
To be used for positioning and applying pressure, e.g. during painting and sandblasting. Material Body Steel, zinc-plated Threaded washer Steel, […]
HALDER FRANCE SAS
Lateral Spring Plungers with spring steel sheet - EH 22160
HALDER FRANCE SAS
The lateral spring plunger with spring steel sheet guarantees a simple and secure positioning of workpieces or components at stops or fixture plates, […]
HALDER FRANCE SAS
Retaining Cables - EH 22400
HALDER FRANCE SAS
These retaining cables secure the single-acting ball lock pin EH 22340., EH 22350., EH 22370. and EH 22380., as well as clamping pin […]
HALDER FRANCE SAS
Adjustable Clamping Levers inner parts from stainless steel, with female thread - EH 24390
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Adjustable Clamping Levers inner parts from stainless steel, with screw - EH 24390
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing, with female thread - EH 24420.
HALDER FRANCE SAS
Advantages of axial bearing: Double clamping force with same lever size, by reducing the surface friction. Protection of workpiece by a fixed locating […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing from stainless steel - EH 24420
HALDER FRANCE SAS
Adjustable clamping levers with rust-proof inner parts. Suitable for multiple applications, e.g. medical environments, chemical industry, and so on. […]
HALDER FRANCE SAS
Adjustable Clamping Levers with axial bearing, with screw - EH 24420
HALDER FRANCE SAS
Advantages of axial bearing: Double clamping force with same lever size, by reducing the surface friction. Protection of workpiece by a fixed locating […]
HALDER FRANCE SAS
Machine and Fixture Elements EH 2207
HALDER FRANCE SAS
Note:To be used for ejecting or for applying pressure or lifting off or as attenuation element.Spring plungers can be fitted and removed by means of […]
HALDER FRANCE SAS
Operating Elements EH 2433
HALDER FRANCE SAS
Note: Cast-iron burr grinded, blasted. Hub machined Material: Handle body Size 63: Malleable cast iron. Sizes 80-250: Nodular cast iron Machine […]
HALDER FRANCE SAS
Operating Elements EH 2445
HALDER FRANCE SAS
Material:Steel, turned, galvanized
HALDER FRANCE SAS
Operating Elements EH 2448
HALDER FRANCE SAS
Material:Free cutting steel, blackened
HALDER FRANCE SAS
Operating Elements EH 2449
HALDER FRANCE SAS
Note: Pressure lug for thrust pad to DIN 6311 S, EH 2256.Pin pressed-in Material: Free cutting steel, blackened. Pressure lug hardened, […]
HALDER FRANCE SAS
Machine Elements EH 2505
HALDER FRANCE SAS
Note:It is a self-centering and non-floating tapered shaft hub in corrosion-protected design with a hexagon nut. By using tapered shaft hubs, all […]
HALDER FRANCE SAS
Machine Elements EH 2510
HALDER FRANCE SAS
Note: Quick plug coupling with radial offset compensation for multiple applications, e.g. as a link between a piston rod and a linear movement unit. […]
HALDER FRANCE SAS
Machine Elements EH 2512
HALDER FRANCE SAS
Note: For levelling of machines and installations. For vertical adjustment, the self-locking height adjusting elements are fitted with a fine-pitch […]
HALDER FRANCE SAS
Combi Parts EH 15800
HALDER FRANCE SAS
System Adaptor Plates (T-slot section)Material: Steel, case-hardened, ground
HALDER FRANCE SAS
Combi Parts EH 15810
HALDER FRANCE SAS
System Adaptor Plates (T-slot cross section) Material: Steel, case-hardened, ground
HALDER FRANCE SAS
Combi Parts EH 16810
HALDER FRANCE SAS
System Adaptor PlatesMaterial: Steel, case-hardened, ground
HALDER FRANCE SAS
Basic Elements EH 1901
HALDER FRANCE SAS
Pallets DIN 55 201-A1Material: Grey cast iron, guide tracks hardened
HALDER FRANCE SAS
Basic Elements EH 1906/EH 1907
HALDER FRANCE SAS
Clamping Angles, semi-finished Material: Grey cast iron, Aluminium
HALDER FRANCE SAS
Basic Elements EH 1908
HALDER FRANCE SAS
Clamping Cubes, semi-finished Material: Grey cast iron
HALDER FRANCE SAS
Basic Elements EH 1912
HALDER FRANCE SAS
Base Plates, semi-finished Material: Grey cast iron
HALDER FRANCE SAS
Operating elements EH 2430 U-Handles
HALDER FRANCE SAS
Ergonomic design offering high stability and smooth surfaces.Material: Aluminium, drawn, bright, slip-grinded, aluminium, plastic-coated, black RAL […]
HALDER FRANCE SAS
EH 2501 (Machine element)
HALDER FRANCE SAS
Spring plunger in robust and compact design with fine-pitch thread and integrated position sensing using standard inductive sensors. Suitable for […]
HALDER FRANCE SAS
Machine and Fixture Elements EH 2203.
HALDER FRANCE SAS
Note:To be used for locating or for applying pressure or lifting off.Temperature range up to + 250 °C.Material:BodyFree cutting steel, […]
HALDER FRANCE SAS
Machine and Fixture Elements EH 2205
HALDER FRANCE SAS
Note:To be used for locating or for applying pressure or lifting off.Temperature range up to + 250 °C.Material:Body Free cutting steel, […]
BÜLTE PLASTIQUES
SNAP-IN CLIPS FOR ASSEMBLY
BÜLTE PLASTIQUES
NEW LENGTHS BÜLTE snap-in clips are the ideal solution for an economical and rapid assembly. Simply press together both pieces […]
HEPCOMOTION
High Speed Driven Track System | DTS2
HEPCOMOTION
The DTS2 High Speed Track System has been developed for high-speed applications. The use of a scroll drive allows rapid indexing to be achieved with […]
HEPCOMOTION
Belt Driven Track Systems | DTS
HEPCOMOTION
HepcoMotion’s Belt Driven Track Systems are a complete package incorporating drive pulleys and belts together with all the ancillary mechanical […]
AMECA
“AMPLAST” inserts for plastics
AMECA
For the execution of professional assembly by screws of low resistance and fibrous materials: • Plastics • Wood and its derivatives • Composite […]
AMECA
Spring type threaded push rods
AMECA
Threaded push rods are used for indexing and positioning necessary for mechanical assemblies. They can also be used as ejectors.
AMECA
Plug tap
AMECA
Entry on 2 leads. For through holes and blind holes. Tapping by hand or by machine.
AMECA
Machine tap for 35° to 39° right-hand helical grooves
AMECA
Entry on 2 to 3 leads. For blind holes. For all materials which are difficult to machine.
AMECA
Inspection stamp
AMECA
Allows checking the tap which must be fitted with an AMECOIL thread insert.
AMECA
Conventional series installation
AMECA
Multiple-dimension with tip + threaded pin.
AMECA
Amecoil SR series installation
AMECA
Multiple-dimension with threaded pin.
AMECA
Column-Spacer for press fitting
AMECA
This column has been specially designed to serve as spacer. It can be fitted quickly and easily and thus saves cost. It simplifies conventional […]
AMECA
"Ball Lock"® ball type quick-release attaching system
AMECA
Ball Lock”® ball type quick-release attaching system. Change your assemblies in 60 seconds or less.
Users who saw this also viewed
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
