All you need to run your factory !
Linked categories +
Star categories
Products (97)
Products from 1 to 80 of 97
OKW
Assembly kit 33, flush fitting version
OKW
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. […]
HAIMER
Pull Stud
HAIMER
Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high.Pull studs of […]
HAIMER
Sawblade holder
HAIMER
Use:For holding sawblades on Weldon toolholdersDesign of shank according to DIN 1835-B well quenched and tempered, internally and externally ground– […]
HAIMER
Coolant Tubes
HAIMER
– Prevents spindle from being spoiled– Must be used with all coolant through HSK spindles– Dual o-ring design makes tube slightly movable– Special […]
HAIMER
Shrink Fit Chuck SK 30 DIN 69871
HAIMER
Use:Suitable for all shrinking units.with taperSK 30 DIN 69871– Heat resistant hot-working steel– Hardened 54-2 HRC– For HSS and solid carbide tools– […]
HAIMER
Power Shrink Chuck: SK 40 forme ADB DIN 69871
HAIMER
Form ADB means: central coolant supply and coolant channels through the flange which can be sealed againThe Power Shrink Chuck is the shrink fit chuck […]
HAIMER
Collet chuck ER SK 40 forme ADB DIN 69871
HAIMER
Use:For clamping tools with cylindrical shank in ER collets. with taperForm ADB means: central coolant supply and coolant channels through the flange […]
HAIMER
Power Collet Chuck: SK 40 forme ADB DIN 69871
HAIMER
Form ADB means: central coolant supply and coolant channels through the flange which can be sealed againThe Power Collet Chuck is the collet chuck for […]
HAIMER
High-precision chuck: SK 40 forme ADB DIN 69871
HAIMER
Use:For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed […]
HAIMER
Weldon toolholder: SK 40 form ADB DIN 69871
HAIMER
Use:For clamping tools with cylindrical shank and Weldon flat.according to DIN 6359-2 with taperForm ADB means: central coolant supply and coolant […]
HAIMER
Collet chuck OZ: SK 40 form ADB DIN 69871
HAIMER
Use:For clamping tools with cylindrical shank in collets according to DIN 6388according to DIN 6391 with taperForm ADB means: central coolant supply […]
HAIMER
Face mill arbor: SK 40 form ADB DIN 69871
HAIMER
Use:For clamping face-mill cutters.similar to DIN 6357 with taperForm ADB means: central coolant supply and coolant channels through the flange which […]
HAIMER
Face mill arbor with coolant exit bores on the end face: SK 40 form ADB DIN 69871
HAIMER
Use:For holding inserted tooth milling cutters and cutters with driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN […]
HAIMER
Combination shell end mill arbor: SK 40 forme ADB DIN 69871
HAIMER
Use:For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830according to DIN 6358 with […]
HAIMER
Whistle Notch toolholder
HAIMER
Use:For clamping cutters with cylindrical shank and inclined flat according to DIN 1835-E and DIN 6535-HEaccording to DIN 6359-2 with taperSK 40 form […]
HAIMER
Blank adapter: SK 40 forme ADB DIN 69871
HAIMER
Use:For manufacturing special tools in your factorywith taperForm ADB means: central coolant supply and coolant channels through the flange which can […]
HAIMER
Quick change tapping chucks: SK 40 form ADB DIN 69871
HAIMER
Use:For tapping preferably on NC milling machineswith taperForm ADB means: central coolant supply and coolant channels through the flange which can be […]
HAIMER
Short drill chuck: SK 40 form ADB DIN 69871 ADB
HAIMER
Use:For high-precise clamping of tools with cylindrical shank with newly developed collets. Very useful for high-speed machiningwith taper
HAIMER
Drill chuck adapter: SK 40 forme A DIN 69871
HAIMER
Use:For holding chucks with three jaws e.g. according ton DIN 6349according to DIN 238 with taper– Fine-balancing against extra charge1) Also suitable […]
HAIMER
Shrink Fit Chuck: JIS B 6339 BT30
HAIMER
Use:Suitable for all shrinking units.– Heat resistant hot-working steel– Hardened 54-2 HRC– For HSS and solid carbide tools– Shank tolerance h6– […]
HAIMER
Collet chuck ER: JIS B 6339 BT30
HAIMER
Use:For clamping tools with cylindrical shank in ER collets.– Included in delivery:locknut (balanced,with slide coating for higher clamping forces); […]
HAIMER
High-precision chuck: JIS B 6339 BT 40 form ADB
HAIMER
Use:For high-precise clamping of tools with cylindrical shank with special collets. Very useful for high-speed machiningwith taperJIS B 6339 BT 40 […]
HAIMER
Weldon toolholder: JIS B 6339 BT 40 form ADB
HAIMER
Use:For clamping tools with cylindrical shank and Weldon flat.similar to DIN 6359 with taperForm ADB means: central coolant supply and coolant […]
HAIMER
Collet chuck OZ: JIS B 6339 BT 40 form ADB
HAIMER
Use:For clamping tools with cylindrical shank in collets according to DIN 6388similar to DIN 6391 with taperForm ADB means: central coolant supply and […]
HAIMER
Combination shell end mill arbor: JIS B 6339 BT 40 form ADB
HAIMER
Use:For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830similar to DIN 6358 with […]
HAIMER
Shrink Fit Chuck: JIS B 6339 BT50 form ADB
HAIMER
Use:Suitable for all shrinking units.Form ADB means: central coolant supply and coolant channels through the flange which can be sealed again– Heat […]
HAIMER
Combination shell end mill arbor: JIS B 6339 BT 50 form ADB
HAIMER
Use:For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830similar to DIN 6358 with […]
HAIMER
Shrink Fit Chuck: DIN 69893
HAIMER
Use:Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without […]
HAIMER
Collet chuck ER: DIN 69882-6
HAIMER
Use:For clamping tools with cylindrical shank in ER collets.– Included in delivery: locknut (balanced, with slide coating for higher clamping forces); […]
HAIMER
Combination shell end mill arbor: DIN 69882-2
HAIMER
Use:For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830– Comprising: Tightening bolt, […]
HAIMER
Shrink Fit Chuck: DIN 69893
HAIMER
Use:Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without […]
HAIMER
Power Shrink Chuck: DIN 69893
HAIMER
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing.The optimized design combines high rigidity […]
HAIMER
Mini Shrink extra slim
HAIMER
– Extreme slim design– No disturbing edges– Highest runout accuracy: 3 µm– Also jobs difficult to access are penetrable– Optimum rigidity– Ideal to […]
HAIMER
Power Collet Chuck
HAIMER
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better […]
HAIMER
Whistle Notch toolholder: DIN 69882-5
HAIMER
Use:For clamping cutters with cylindrical shank and inclined flat according to DIN 1835-E and DIN 6535-HE– Comprising: Clamping screw and adjustment […]
HAIMER
Blank adapter
HAIMER
Use:For manufacturing special tools in your factoryDesign:HSK is hardened and ground, the cylindrical part is soft
HAIMER
Quick change tapping chucks
HAIMER
Use:For tapping preferably on NC milling machinesAdvantages:– axial length compensation– interior high-pressure cooling up to 50 bar– newly developped […]
HAIMER
Shrink Fit Chuck: DIN 69893
HAIMER
Use:Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without […]
HAIMER
Collet chuck ER: DIN 69882-6
HAIMER
Use:For clamping tools with cylindrical shank in ER collets.– Included in delivery: locknut (balanced, with slide coating for higher clamping forces); […]
HAIMER
Shrink Fit Chuck
HAIMER
Use:Suitable for all shrinking units.– Heat resistant hot-working steel– Hardened 54-2 HRC– For HSS and solid carbide tools– Shank tolerance h6– […]
HAIMER
Shrink Fit Chuck: DIN 69893
HAIMER
Use:Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without […]
HAIMER
Combination shell end mill arbor: DIN 69882-2
HAIMER
Use:For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830– Comprising: Tightening bolt, […]
HAIMER
Collet chuck ER: DIN 69882-6
HAIMER
Use:For clamping tools with cylindrical shank in ER collets.– Included in delivery: locknut (balanced, with slide coating for higher clamping forces); […]
ELOBAU
Accessories for Safety Components : 363098
ELOBAU
Interface for control units 462 12. G1./462 121 E1./H1./463 12. ..
ARNOLD
Telescopic steel cover
ARNOLD
Features: tightly sealed against oil,coolant and swarf, special sheet metal construction, choice of shapes and dimensions, minimum maintenance […]
PRO'COUPE Industries
Zone plate for cold sealing
PRO'COUPE Industries
We do all your plates for cold areas upon sealing tooling model or plan according to manufacturer tolerances. • Sizes : MADE TO ORDER • To […]
OMT
Dental implants
OMT
Conical screw shape and wide load-bearing thread flanks for optimal distribution of load in bone. Does not force bone apart.Cerid®-titanium-zirconium […]
OMT
Hip implants
OMT
Superhardened titanium femoral heads with a titanium-niobium ceramic surfaceo.m.t supplies the implant in 5 different sizes to suit all patients. The […]
OMT
Knee implants
OMT
Since 1991 numerous clinical studies have demonstrated the fundamental advantages of cerid®-coated knee implants.o.m.t's biocompatible cerid® coating […]
OMT
Osteosynthesis
OMT
A cerid® coating on osteosynthesis materials inhibits friction corrosion and increases biocompatibility. What's more, it makes implants easier to […]
OMT
Vascular implants
OMT
BMS (bio-metal surface) stents with an implanted highly elastic nano-structured tantalum layer.Normal stainless steel stents can cause inflammatory […]
CASCADES SA
Coin Wrappers
CASCADES SA
The Plastichange® line, used for organizing change, is available from Cascades in bulk or as individual holders. Economical and easy to use, […]
CASCADES SA
Hangers
CASCADES SA
Available in several colours, Cascades' MAXIMA® hangers are economical and durable.
INDEX FRANCE
Tool holder
INDEX FRANCE
InnovationOur engineers have a wealth of experience and continuously surprise with innovative ideas. The frequently patented solutions set standards […]
ITATOOLS
Accessories: Sospension bracket
ITATOOLS
Sospension bracket: 2 position sospension bracket for ita 20-21
TITANOX
Inserts for plastics
TITANOX
Ultrasonic/heat staking, molded-in and press-in inserts in various types and sizesType : IUB,IUC, IUTB,IUTC, ISB,ISC, IBB,IBC, IBLC,ITB, ITC,STKB, […]
OTTO MARTIN MASCHINENBAU
Option „ECOsleep“ for sliding table saws and shapers
OTTO MARTIN MASCHINENBAU
Save energy, increase efficiency : With the new ECOsleep package, MARTIN can now reduce the energy consumption of all shapers and sliding table saws […]
BURKERT CONTROMATIC
Accessories for Process and Control valves : Type 2XXX
BURKERT CONTROMATIC
Accessories for pneumatic stroke and rotary actuators: Electrical position feedback, external magnet inductive feedback, manual override, stroke […]
IFANGER
Knurling tool
IFANGER
• Large range of holders especially for forming.• Space-saving construction and therefore suitable for all type of sliding headstock lathes.• Long […]
DONADON SDD
Metal discs : DCD – composite rupture disc
DONADON SDD
Donadon DCD rupture disc is a composite conventional disc formed by three parts :- A slotted, perforated metal part.- A seal membrane (usually in PTFE […]
DONADON SDD
Metal discs : SCR – Reverse micro-scored rupture disc
DONADON SDD
Donadon SCR is a compression (or reverse) disc with micro-scored calibrated section.Special feature of SCR is scoring in 6 sectors instead of 4 as […]
DONADON SDD
Metal discs : Y90 – Reverse rupture disc
DONADON SDD
The Y90 DONADON rupture disc is a compression (or reverse) disc peripherally scored.Y90 disc has lower sensitivity to variations in temperature than […]
DONADON SDD
Metal discs : STD - solid
DONADON SDD
Die Donadon Berstscheibe Typ STD ist eine konkav geformte konventionelle Berstscheibe mit geeichter und stabiler Entlastungsöffnung.
DONADON SDD
Metal discs : DIF – rupture disc for installation between flanges
DONADON SDD
Donadon DIF rupture disc is a composite conventional disc formed by four parts :- A slotted, perforated metal part.- A seal membrane (usually in PTFE […]
DONADON SDD
Metal discs : LPD – low pressure rupture disc
DONADON SDD
Donadon LPD rupture disc is a composite conventional disc formed by four parts :- A slotted, perforated metal part.- A seal membrane (usually in […]
DONADON SDD
Metal discs : TCD – rupture disc for road and rail tankers
DONADON SDD
Donadon TCD rupture disc is a composite conventional disc formed by four parts :- A slotted, perforated metal part.- A seal membrane (usually in PTFE […]
DONADON SDD
Metal discs : Rupture discs in sealed units SU/T e SU/M
DONADON SDD
Donadon SU/T and SU/M rupture discs are sealed units formed by a conventional disc with solid calibrated section mounted in a threaded connector.These […]
DONADON SDD
Graphite discs : GM - monoblock graphite rupture disc
DONADON SDD
The DONADON GM of monoblock graphite rupture disc is versatile and suitable for numerous applications. It may be directly inserted between […]
DONADON SDD
Graphite discs : GR - replaceable
DONADON SDD
The DONADON replaceable “GR” graphite rupture disc is mounted on a graphite or metal holder.This disc is versatile and suitable for numerous […]
DONADON SDD
Graphite discs : GA - graphite rupture disc mounted on a Stainless steel ring
DONADON SDD
The DONADON replaceable GA graphite rupture disc is mounted on a Stainless steel (or other metal) ring and may be directly inserted between […]
DONADON SDD
ATEX certified rupture discs
DONADON SDD
Donadon SDD manufactures rupture discs in special executions according to European Directive 94/9/CE (ATEX), certified Ex II 2 GD.Therefore these […]
DONADON SDD
Supports
DONADON SDD
If the rupture discs is exposed to vacuum or counter pressure it may be necessary to use also a support with adequate design and strength.Support […]
DONADON SDD
Holders
DONADON SDD
Donadon holders are designed in order to ensure maximum performance and reliability to Donadon rupture discs. Holder model is selected according to […]
DONADON SDD
Linings and special executions
DONADON SDD
Donadon SDD offers also a wide range of special executions and linings :- Fluoropolymer coating of discs and holders.- Holders in reinforced PTFE.- […]
BERGER AG
MSBU - The Modular System
BERGER AG
The MSBU line of drill heads was developed for clients who repeatedly work on mechanical parts in small series production. The amortization of […]
SOCKET COMMUNICATIONS
Replacement Accessory Kit - For Mobile Power Pack
SOCKET COMMUNICATIONS
Replacement or spare accessories for the Mobile Power Pack
NEWAGE AVK SEG
STAMFORD P0/P1 accessories
NEWAGE AVK SEG
Excitation Boost System (EBS) : The EBS has been designed to provide 300% short circuit current and improved motor starting. Supplied as a single […]
Users who saw this also viewed
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
