2 Head Copying Machine - FC 360 S 3P

For 2-sided machining by 90 ° pivoting of all non-ferrous alloy profiles, in particular aluminum and thin steel profiles.

Copy milling machine with 2 heads (1 milling and 1 drilling) per template or stop system, offering the possibility of milling the 2 faces of a profile and successively the top and the bottom of the profile with strawberries.

This machine, mounted on fixed frame is equipped with :

• Pneumatic clamping system by 4 cylinders (vertical and horizontal) mounted on a console allowing the profile to rotate 90 ° along its axis, the locking in position is pneumatic.
• Pneumatic locking device of the head along the vertical axis.
• 6-position revolver stop.
• Set of lateral supports with stops of 1100 mm length not graduated.
• Spray system controlled by button on the left lever.
• Chip gun.
• Feed path length 500 mm.
• Milling head:

- TRI 400 V motor, power 0.35 / 0.45 kW, 2 spindle speeds 5000 and 10000 rpm.
- Control lever for raising and lowering the milling head.
- Control lever for moving the milling head on the horizontal plane.
- Template with 1 pneumatic copying finger Ø 5/6/8 mm.
- Clamp Ø 8 mm.

• 3-pin drilling head:

- TRI 400 V motor, 1.1 kW power, spindle speed 900 rpm.
- Drilling of 3 holes Ø 12/14/12 mm or Ø 10/12/10 mm (depending on the drills), center distance of 21.5 mm (without loosening the profile).
- Automatic feedrate with adjustable speed.
- Horizontal head drill bit with M10 male thread.
- Height adjustment from 25 to 80 mm with visual indication.