2-end milling cutter - PRISMA 600

For the machining of ALU profiles (curtain wall) and 3-plane skew cut with the possibility of machining a profile of 300 mm width in straight milling (at 90 °) and an angled profile up to 30.

Designed for use with carbide tipped saw cutters Ø 500 mm (horizontal head) and Ø 600 mm (vertical head).

This machine is equipped with:

• 2 TRI 400 V motors, power 3.0 kW, speed of rotation 2800 rpm.
• Vertical saw mill swivel + 60 ° / 90 ° / - 22 ° 5 (rear / front).
• Horizontal milling cutter that can be aligned at the same time as the vertical milling cutter by means of the gondola support by flying system and reading on visu (possible orientation of + 45 ° / 90 ° / - 45 °).
• Oleopneumatic movement of the sawhead with adjustment of the feedrate.
• Return of the head in fast speed during machining, profile remaining fixed.
• Motorized milling height adjustment (reading on display).
• Reading of the angle on visu, orientation by steering wheel.
• Pneumatic vertical and horizontal clamping of the profile.
• Rear jaw swivels from left to right: + 30 ° / 90 ° / - 45 °.
• Straight lugs, 1 bias side, 2 sided sides, 3 sided sides possible.
• 2-hand control console.
• Front protective cover folds upwards.
• Lubrication of the blade by spray nozzle.

Model presented with the 4-axis digitized control option.

NOTE: By removing the horizontal saw blade, this machine can also be used as a cut-off saw.