Round column drills Mexed transmission belt/geared BC-40VE

IBARMIA mod. BC-40VE        Drill with sliding table   Combined transmission by belts & gears   Electronic speed variator   Continuous speed range   Automatic feed reverse for tapping   Automatic tool ejector   4 automatic feeds   Electromagnetic clutch   Digital rpm counter   Rotating and tilting table   Depth scale and adjustable depth stop   Built-in low voltage electrical equipment in machine head   Emergency STOP push button   Coolant system and worklight   Right/left turn   Front hand wheel for fine feed work   Drill guard with microswitch   CEE Norms   Colour combination of RAL7004 and RAL7466       Technical characteristics:   Maximum drilling capacity in steel St.60 40 mm. Maximum drilling capacity in cast iron 200 Brinell 50 mm. Maximum tapping capacity in steel St.60 M 36. Maximum tapping capacity in cast iron 200 Brinell M 42. Morse Taper MT MT-4. Maximum spindle stroke (drilling depth) 200 mm. Main motor power 4CV. Coolant pump motor power 0,10CV. Transmission Belt/Gears. Number of speeds Continuous Speed variator type Electronic Speed range with motor at, 1500 r.p.m. 50 Hz 30-230 / 90-730rpm. Feed Automatic by electromagnetic clutch Number of automatic feeds 4. Automatic feed range 0,1-0,2-0,3-0,4. Worktable dimensions (LxW) 550x550 mm. Column diameter 175 mm. Distance from spindle centre to column face 360 mm. Net weight 660 Kg. Gross weight with packing 750 Kg. Packing dimensions (length x width x height) 2,22x0,74x1,27 m.     Optional equipment:   AR: 50% lowered feed rate range   FL-116: 116 mm opening fixed vice   FL-157: 157 mm opening fixed vice   FS-150: 150 mm opening fixed vice   P16-M4: Drill chuck from Ø1 to Ø16 mm Morse 3 taper