Easy-Laser E970/E975 Parallelism system use the traditionnal method where a laser beam is pointed alongside the machine, and then deflected 90 degrees towards the measurement object by a penta prism.
The prism is moved along the beam, which is deflected to each roll that is to be measured and maybe aligned. Both ends of the roll are measured, and you get an angular value which is compared to the reference line (base line) or a reference roll. Besides paper machines, printing machines and rolling mills you can also measure and align rails, overhead tracks, metal sheet cutters and many other types of machines.
The E970/E975 are especially suitable when many objects are to be measured and aligned, and when meauring ove a long distance. The maximum distance with a standard system is 80 meters, the number of measurement objects can be several hundred, but is more likely limited by other practical factors than the system software!
The alignment of the rolls can be performed in live mode with instant feedback. You can add, remove and remeaure objects any time during measurement. The result is displayed both graphically and digitally in a table, and a PDF report can be produced directly on-site. Then transfer the results to your PC and the data base software EasyLink (included)
Paper mill
Print shop
Pastics processes
Mtalworking industry
Maintenance
All you need to run your factory !
