Easy-Laser® E960 Turbine alignment systems

Easy-Laser E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easie thanks to the wireless detector unit and measurement programs that guides you through the measurement process.
All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery. The versatile design solves the straightness measurement problems quickly and with precision for any kind of appliation. Objects up to 40m (132 feet) can be measured. The detector reads measurement values with a resolution of 0,001mm (0,05 mils).

The system comes in two versions. Easy-Laser E960-A has a measuring probe with a stroke of 10mm. The slidable tube makes it possible to measure several positions in a row without moving the bracket. Suitable for gas turbines and smaller steam turbines. Easy-Laser E960-B has a measuring probe with a stroke of 60mm. This system is suitable for larger turbines. Software, laser transmitter and detector are common to the systems. The detector brackets differ. See system content under tab "Systems parts".

The straightness programs of system E960 are very versatile and let you work in the way thats suits every job best. You can add, remove and remeasure measurement points at any time during the measurement. Up to 999 points can be handled by the prorgram. You can include both full bores and half bores in any possible combination in one measurement, the program will calculate the correct centre line in all cases.
The measurement program includes many different methods for straightness measurement: 1-point measurement, 4-point measurement, multipoint measurement (also ovality measurement dis), 3-point measurement with arbitrary angles. Optionally a reference detector can be used to monitor the laser transmitter position at long distances.

Thanks to the large colour display with clear graphs and measurement data you can evaluate the result directly on site. Any point can be set as a reference and you can set an offset to which the centre line will be recalculated. You can also calculate waviness (short and long) and best-fit for the points. If you want, the result can be also checked against a tolreance value. The measurement system takes care of all theses complicated calculations for you