“ Real-time measurements
Automatic reports
Reliable
Maximum accuracy ”
Ask for a quoteReceive DocumentationContact the supplier
Easy- Laser E950 makes the control and adjustment work of bearings easier thanks to the wireless detector unit and measurement programs that guide you through the measurement process. All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery.
The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. You can then evaluate the results directly on-site wi different calculation methods such as Best fit around zero and Waviness. It is also possible to analyse the different hoices of reference points and set the offset and tolerance values. One new feature is the check of ovality, for example, to analyse the wear rate. The measurement system takes care of all these complicated calculation for you. You measure and align both ful and half bea ring journals with equal simplicity. The wireless detector eliminates uncertain factors such as a cable pull. All parts are designed for maximum accurancy and stability, and measure with a resolution of 0,001mm (0,05mils). Measurement distance up to 40m (10 feet). Easy-Laser E950 is suitable for use both in production and out in the field.
Four versions of measurement system are available:
- Easy-Laser E950-A
- Easy-Laser E950-B
- Easy-Laser E950-C
- Easy-Laser E950-D
Contact us for more details
With the systems, you can also measure the straightness of shafts, foundations, etc. without any additional accessories. With the measuring devices for shaft alignment (accessories), you have the most complete measurement system to align the entire drive traib on the market. Programs for all types of measurements are included as standard, you then adapt the measurement system with brackets and detectors for your needs now and in the future.
Bore for levels of 80 to 550 mm diameterBore for levels of 250 to 1000 mm diameter
All you need to run your factory !
