CATALOGUES
WHITE PAPERS
PRESS RELEASES
...
SHEET METAL, PLATES, BILLETS, TUBES
Shot blast machines for sheet, metal, plates, billets, tubes Rolled steel products are used in […]
Find out more
RDS SHOT PEENING SYSTEMS FOR SUSPENSION AND COIL SPRINGS
RDS shot peening systems are used for shot peening of coil springs and similar parts. The pieces are […]
SRS-TWIST SHOT PEENING SYSTEMS FOR CUP AND CLUTCH SPRINGS
High efficiency shot peening systems, type SRS-Twist are used for surface compaction of clutch springs […]
RECONDITIONING AND REBUILD
In the paint spraying and varnishing industry, shot blast machines are used to prepare the surfaces of […]
BLASTING PRINCIPLE 3-WHEEL SHOT BLAST MACHINE
Single strand longitudinal blasting with 3 blast wheels Stream guide plates which can be adjusted to […]
BLASTING PRINCIPLE 4-WHEEL SHOT BLAST MACHINE
Single strand longitudinal blast cleaning four wheels with or without stream guide plates which can be […]
BLASTING PRINCIPLE 6-WHEEL SHOT BLAST MACHINE
Single strand longitudinal blasting with 6 blast wheels. Machines of these series are especially […]
WORKING PRINCIPLE MEDIUM AND WIDE STRIP DESCALING MACHINES
The transverse blasting principle using 4 Blast wheels is adapted to flat and wide material. To adapt […]
ST APRON CONVEYOR BLAST CLEANING MACHINES
Ideal solution for blast cleaning of medium and larger sized, tumble-proof workpieces in batch […]
DTC BATCH-TYPE BLAST CLEANING MACHINES
Blast cleaning and decoring of tumble-proof castings (grey, ductile and malleable iron, steel) in […]
CT THROUGH-FEED BLAST CLEANING MACHINES
The through-feed blast cleaning process offers a number of decisive advantages and ensures efficient […]
DT THROUGH-FEED BLAST CLEANING MACHINES
CBC CONTINUOUS SHOT BLAST BELT CONVEYOR
In shot blast systems with an endless belt conveyor, rotation-symmetric shock- and vibration-sensitive […]
WM WIRE MESH BLAST CLEANING MACHINES
Desanding of flat, thin walled and fragile iron or aluminium castings calls for specific demands on the […]
SPH SPINNER HANGER SHOT BLAST MACHINES
The Spinner Hanger Machine is suitable for surface treatment and deburring of aluminium parts, […]
VERTICAL MOULDING DISA 270
Production capacity: up to 400 moulds/hour (uncored) Mismatch of 0.2 mm or […]
VERTICAL MOULDING DISA 280
Production capacity: up to 300 moulds/hour (uncored). Mismatch of 0.25 mm […]
HORIZONTAL MOULDING DISA Flex 70
The DISA FLEX 70 horizontal flask moulding machine is characterised by a double-air blow and […]
VERTICAL MOULDING DISAMATIC 2110
The vertical moulding machine is the right choice for production of very close tolerance […]
VERTICAL MOULDING DISA 130
The DISA 130 was launched in the beginning of 2006 and it makes DISA's latest technology affordable […]
VERTICAL MOULDING DISA 240
Production capacity: up to 450 moulds/hour (uncored) […]
VERTICAL MOULDING DISA 250
Production capacity: up to 450 moulds/hour (uncored) Mismatch of […]
AUTOMATIC MOULD CONVEYOR (AMC)
The function of the Automatic Mould Conveyor is to carry and convey the mould string from the moulding […]
SYNCHRONISED BELT CONVEYOR (SBC)
The SBC consists of a basic unit, which forms the inlet and the outlet section of the SBC. Increased […]
MULTICONTROLLER SMC-PRO
The Multicontroller SMC regulates the sand preparation process in the mixer and ensures consistent sand […]
PLC CONTROL UPGRADE WITH ULTRASONIC POSITION MEASURING
The PLC control system upgrade incorporates A control cabinet for all units of the DISAMATIC […]
WORKING PRINCIPLE NARROW STRIP DESCALING MACHINES
The strips are processed in single-strand longitudinal blasting principle, using 4 blast wheels. The […]
Disacool Cooling drum
The DISACOOL Cooling Drum shakes out the mould and cools the castings. Furthermore the cooling drum […]
Vertical moulding
The first DISAMATIC® was introduced in 1964. Today, 40 years later, DISA maintains an undisputed […]
Buyers
Suppliers
All you need to run your factory !
