All you need to run your factory !
Sub-category +
Nuts (218)
Washer (198)
Vise (39)
Star categories
Products (1 316)
Products from 961 to 1 040 of 1 316
FRESMAK
High pressure automatic vices - ARNOLD TWIN pneumo-hydraulic
FRESMAK
The exterior clamping pressure towards the centre provides a dynamically compensated clamp and avoids deformation.
FRESMAK
High pressure automatic vices - ARNOLD IZ1
FRESMAK
Various clamps on one single base plate available, with a single oil input. In this way, a monoblock is obtained which can clamp a large number of […]
FRESMAK
High pressure automatic vices - ARNOLD IZ2
FRESMAK
Various vices on one single base plate available. Possibility of jaws adapted to the geometrical requirements of the work-piece. Made to measure jaws […]
FRESMAK
High pressure automatic vices - ARNOLD oleo-dynamic
FRESMAK
The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
FRESMAK
High pressure automatic vices - ARNOLD pneumo-hydraulic
FRESMAK
The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
FRESMAK
High pressure automatic vices - ARNOLD COMPACT oleo-dynamic
FRESMAK
The ARNOLD COMPACT has a descending clamp system to avoid that the clamped part lifts up. This is a semi-sphere installed between the moveable jaw and […]
ELCIS
"SERVO MOUNT" CLAMPS
ELCIS
These fixing clamps are used for encoders mounting with Servo-mount installation. It's suggested the use of no. 3 clamps set at 120° for each encoder.
KIPP FRANCE
Knurled Nuts 06010
KIPP FRANCE
Free-cutting steel black oxide finish,stainless steel natural finish. In steel and stainless steel to DIN 6303.
KIPP FRANCE
Hook Clamps 04370
KIPP FRANCE
Material:Tempered, heat treated steelSurface finish:Black oxide finish
KIPP FRANCE
Quick-Acting Knurled Nuts 06030
KIPP FRANCE
Material:Tempered steelSurface finish:Heat-treated and black oxide finishNote:Quick-Acting Knurled Nuts are mainly used in applications where no high […]
KIPP FRANCE
High Knurled Thumb Screws in steel and stainless steel to DIN 464 06090
KIPP FRANCE
Material, surface finish:Free-cutting steel black oxide finish; stainless steel natural finishNote:* The Knurled Thumb Screw is supplied with shaft in […]
KIPP FRANCE
Plastic Knurled Thumb Screws 06091
KIPP FRANCE
Material:Black duroplastic PF 31,threaded bolt in steelSurface finish:Threaded bolt galvanized
KIPP FRANCE
High Knurled Nuts in steel and stainless steel to DIN 466 06110
KIPP FRANCE
Material, surface finish:Free-cutting steel 1.0711 black oxide finish,stainless steel natural finishNote:High Knurled Nuts M12 are not provided on the […]
KIPP FRANCE
Thin Knurled Nuts in steel and stainless steel to DIN 467 06120
KIPP FRANCE
Material, surface finish:Free-cutting steel 1.0711 black oxide finish,stainless steel natural finish.Note:Thin Knurled Nuts M12 are not provided on […]
KIPP FRANCE
Vertical Clamps with straight foot and adjustable clamping spindle
KIPP FRANCE
Material : Steel Surface finish : - Galvanized and chromated,- Clamping spindle and nuts phosphated,- Plastic handle oil-resistant Note : The opening […]
KIPP FRANCE
High Knurled Thumb Screws in steel and stainless steel to DIN 464
KIPP FRANCE
Material, surface finish : Free-cutting steel black oxide finish; stainless steel natural finish Note : * The Knurled Thumb Screw is supplied with […]
KIPP FRANCE
Nuts with flat point
KIPP FRANCE
Material: Steel Surface finish: Black oxide finish
Arconic Fastening Systems and Rings
Flange Nut
Arconic Fastening Systems and Rings
Diameter Sizes: M4-M24 Material: Steel CL8 and CL10 Stainless Steel A2 and A4
Arconic Fastening Systems and Rings
Weld Nut
Arconic Fastening Systems and Rings
Diameter Sizes: M6-M16 Material: Steel CL8 Stainless Steel A2 and A4
Arconic Fastening Systems and Rings
Washer Nut
Arconic Fastening Systems and Rings
Diameter Sizes: M2-M52 Material: Steel CL8 Stainless Steel A2 and A4
Arconic Fastening Systems and Rings
Square head screw
Arconic Fastening Systems and Rings
M6x1.00-6g Length : 35mm Materials : AISI 302HQ.
Arconic Fastening Systems and Rings
Bolt
Arconic Fastening Systems and Rings
M6x1.00-6g Length: 12mm Materials: AISI316
Arconic Fastening Systems and Rings
Torx head screw
Arconic Fastening Systems and Rings
M6x1.00-6g Length : 34.6mm Materials : AISI 316L/316LCu
Arconic Fastening Systems and Rings
Socket set screw
Arconic Fastening Systems and Rings
M5x0.8-6g Length : 20mm Materials : AISI304
Arconic Fastening Systems and Rings
Special Nuts
Arconic Fastening Systems and Rings
SNEP has the capability to manufacture to customer drawing specifications. In addition to the ESN and DAH slotted nuts SNEP design and manufacture a […]
Arconic Fastening Systems and Rings
Simmonds Self Locking Nuts
Arconic Fastening Systems and Rings
There are many situations where it is beneficial to use a locking nut over a standard nut. Whatever fastening problem you're looking to overcome from […]
Arconic Fastening Systems and Rings
The SNEP self-locking nut
Arconic Fastening Systems and Rings
The original single slotted self-locking nut developed in 1954 is still available today alongside a wider range of self-locking nuts. Despite major […]
Arconic Fastening Systems and Rings
Nuts Made To Your Specification
Arconic Fastening Systems and Rings
With a long history in the manufacture of precision aerospace fasteners, we have built up a wealth of knowledge and experience in providing high […]
Arconic Fastening Systems and Rings
Klik Rivet Nut
Arconic Fastening Systems and Rings
MRN Series Rivet-Nuts can be used in a wide range of applications and are designed to provide a very efficient and cost-effective method of placing […]
Arconic Fastening Systems and Rings
Klik Poly-Nut
Arconic Fastening Systems and Rings
Klik Poly-Nuts can be used in a wide range of applications and are designed to provide a very efficient and cost-effective method of placing permanent […]
Arconic Fastening Systems and Rings
Klik Thread-Serts
Arconic Fastening Systems and Rings
Klik Thread-Serts are a versatile threaded fastener that can be used in a variety of applications. Use Klik Thread-Serts in any thickness of metal or […]
Arconic Fastening Systems and Rings
Ribbed Klik-Nuts
Arconic Fastening Systems and Rings
Ribbed Klik-Nuts provide an efficient and cost-effective method of placing permanent threads in thin materials. Installed from one side, these inserts […]
Arconic Fastening Systems and Rings
Rivets - Open End
Arconic Fastening Systems and Rings
Benefits: For blind fastening where there is no access to opposite side of work Simple to install Wide variety of head styles and lengths available […]
Arconic Fastening Systems and Rings
Rivets - closed end
Arconic Fastening Systems and Rings
Benefits: Moisture-resistant due to tight seal Mandrel is retained 100% of time Wide variety of head styles and lengths available from 1/8" to […]
Arconic Fastening Systems and Rings
Rivets - Multi-Grip
Arconic Fastening Systems and Rings
Benefits: Extended grip range capacity Reduces inventory (fewer sizes required) Use as a standard open end rivet Wide variety of head styles and […]
Arconic Fastening Systems and Rings
Rivets - Tri-Bulb
Arconic Fastening Systems and Rings
Benefits: Large footprint on blind side Multi-grip capability Oversized hole tolerant Great for soft or brittle materials Material Combinations: […]
Arconic Fastening Systems and Rings
Rivets - Q-Lok™
Arconic Fastening Systems and Rings
Benefits: Retained mandrel increases shear and tensile strength Use in high vibration applications Mandrel breaks flush when used in mid-grip range […]
Arconic Fastening Systems and Rings
Rivets - T-Rivets(KLIK SPLIT®)
Arconic Fastening Systems and Rings
Benefits: High clamp up High shear strength Creates a wide bearing surface 1/4" diameter Material Combinations: Aluminum/steel
Arconic Fastening Systems and Rings
LockBolts : Huck C6L®
Arconic Fastening Systems and Rings
The Original Huck Design 5.8 grade small diameter LockBolt Made to British Standard B7805: Part 1: 1997: A mark of quality, safety and performance […]
Arconic Fastening Systems and Rings
LockBolts : Huck C120L®
Arconic Fastening Systems and Rings
8.8 grade small diameter LockBolt High tensile strength version of C6L Pin head style: Brazier, truss, countersunk Collar style: Standard, flanged […]
Arconic Fastening Systems and Rings
LockBolts - Huck Magna-Grip®
Arconic Fastening Systems and Rings
Huge grip range: Accommodates wide variations in joint thickness - 14.3/23.9mm * One pin and one collar cover a wide variety of applications: Reducing […]
Arconic Fastening Systems and Rings
LockBolts : Huck C50L®
Arconic Fastening Systems and Rings
8.8 grade large diameter LockBolt Made to British Standard B7805: Part 2: 1997: A mark of quality, safety and performance High tensile friction grip […]
Arconic Fastening Systems and Rings
LockBolt Evolution : Huck BobTail®
Arconic Fastening Systems and Rings
Designed to overcome inherent weaknesses with standard lockbolts, the BobTail has no pin-tail and as a result of this zero pin-break, no waste […]
Arconic Fastening Systems and Rings
Hucktainer
Arconic Fastening Systems and Rings
Designed specifically for joining composite board in trailer applications. Will not crush or damage the composite board Integral seal around pin […]
Arconic Fastening Systems and Rings
Blind Fasteners : Huck Magna-Lok®
Arconic Fastening Systems and Rings
Wide grip range: Accommodates large variations in joint thickness Structural fastener: High shear & tensile strength Excellent gap closure […]
Arconic Fastening Systems and Rings
Blind Fasteners - Huck Magna-Bulb®
Arconic Fastening Systems and Rings
Extra large blind side footprint: Ideal for lower strength or thin sheet joint materials Structural fastener: Very high shear strength […]
Arconic Fastening Systems and Rings
Blind Fasteners HuckLok™
Arconic Fastening Systems and Rings
Combines the wide grip range of the Magna-Lok and the high shear strength of the Magna-Bulb Wide grip range: Accommodates large variations […]
Arconic Fastening Systems and Rings
Blind Fasteners : Auto-Bulb™
Arconic Fastening Systems and Rings
Purpose design blind side shape for easy hole location: Ideal for automated assembly Large blind side footprint: Ideal for lower […]
Arconic Fastening Systems and Rings
Blind Fasteners - Huck BOM®
Arconic Fastening Systems and Rings
Can be used in demanding structural applications as an alternative to threaded fasteners or welding Very high joint tightness when compared to […]
Arconic Fastening Systems and Rings
Blind Fasteners - Huck FloorTight® - The flooring specialist fastener
Arconic Fastening Systems and Rings
Ideal for use on timber flooring and phenolic faced plywood Superior strength to conventional flooring screws: Reduces the number of […]
Arconic Fastening Systems and Rings
Huck Magna-Tite™ - The roofing specialist fastener
Arconic Fastening Systems and Rings
Magna-Tite™ Ideal for roofing or similar applications Extra large blind side footprint: Ideal for lower strength or thin sheet joint […]
Arconic Fastening Systems and Rings
Special Application Rivets
Arconic Fastening Systems and Rings
Benefits: Small flange rivet used primarily for fastening decorative Rivets materials on boats, automobiles, trucks & other motor vehicles Best […]
Arconic Fastening Systems and Rings
Cage Nut
Arconic Fastening Systems and Rings
Diameter Sizes: M4-M16 Material: Steel CL8 and CL10 Stainless Steel A2 and A4
Arconic Fastening Systems and Rings
Quick Release Fasteners 5F Series
Arconic Fastening Systems and Rings
Max. tensile strength 670 N, working load 450 N. Plastic washer stud assembly to protect decorative surfaces. Spring loaded receptacle.
Arconic Fastening Systems and Rings
Quick Release Fasteners 99F Series
Arconic Fastening Systems and Rings
Max. tensile strength 700 N, working load 480 N. Increased grip range. Encapsulated design, splash-proof.
Arconic Fastening Systems and Rings
Quick Release Fasteners 50F 900N Series
Arconic Fastening Systems and Rings
Max. tensile strength 900 N, working load 650 N. Stud assembly incorporates a plastic washer to protect decorative surfaces. Snap-in or clip-on spring […]
Arconic Fastening Systems and Rings
Quick Release Fasteners 50F 3700N Series
Arconic Fastening Systems and Rings
Max. tensile strength 3.700 N, working load 2.600 N. Small fastener giving high tensile load. Flat receptacle. High preload.
Arconic Fastening Systems and Rings
Quick Release Fasteners 2600 Series
Arconic Fastening Systems and Rings
Max. tensile strength 1.330 N, working load 900 N. Small fastener giving a high tensile load. Wide range of stud head styles and receptacles.
Arconic Fastening Systems and Rings
Quick Release Fasteners 2700 Series
Arconic Fastening Systems and Rings
Max. tensile strength 1.000 N, working load 700 N. Small fastener giving a high tensile load. Wide range of stud head styles and receptacles.
Arconic Fastening Systems and Rings
Stud Keensert
Arconic Fastening Systems and Rings
Typically used in applications for aerospace and military.
Arconic Fastening Systems and Rings
Solid Inserts Blind Keensert
Arconic Fastening Systems and Rings
Used in applications which require isolation of the screw from other assembly elements of the application. Will ensure that dust and other foreign […]
Arconic Fastening Systems and Rings
Captive Solutions 5D4002 Series
Arconic Fastening Systems and Rings
Max. tensile strength 4.700 N, working load 3.100 N. Small fastener for high tensile load. Large range of stud assemblies with fixed and floating […]
Arconic Fastening Systems and Rings
Captive Solutions 991F Series
Arconic Fastening Systems and Rings
Max. tensile strength 10.000 N, working load 7.000 N. High tensile strength and preload. Typical applications: Commercial vehicles, coaches, […]
Arconic Fastening Systems and Rings
Captive Solutions 15F Series
Arconic Fastening Systems and Rings
Max. tensile strength 1.30 N, working load 930 N. Quick opening and closing by a push of the finger. Easy installation with single hole mounting.
Arconic Fastening Systems and Rings
Captive Solutions 715F Series
Arconic Fastening Systems and Rings
Max. tensile strength 700 N, working load 600 N. Easy and economic clip-in installation for stud and receptacle. Also suitable for automatic […]
Arconic Fastening Systems and Rings
Captive Solutions 716F Series
Arconic Fastening Systems and Rings
Max. tensile strength 1.400 N, working load 1.200 N. Easy and economic clip-in installation for stud and receptacle. Also suitable for automatic […]
Arconic Fastening Systems and Rings
Captive Solutions CAM-PT10 series
Arconic Fastening Systems and Rings
Max. tensile strength 1.200 N, working load 800 N. 1/4 turn to open, close with a push of the finger. Wide grip range. Tool or hand operated. Fast […]
OMT
Foot implants
OMT
The Twist-off screw supports Weil’s operating technique for the reconstruction of hammer toes. Using a mandrel the screw is screwed through the […]
Users who saw this also viewed
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
