All you need to run your factory !
Sub-category +
Nuts (218)
Washer (198)
Vise (39)
Star categories
Products (1 318)
Products from 1 121 to 1 200 of 1 318
BÜLTE PLASTIQUES
Polycarbonate washers (PC) transparent
BÜLTE PLASTIQUES
Polycarbonate washer offers a good resistance to shocks.
BÜLTE PLASTIQUES
13 PLASTIC CAPS
BÜLTE PLASTIQUES
BÜLTE features an extensive selection of plastic caps with variant head style, for all metal screws : […]
BÜLTE PLASTIQUES
PLASTIC SCREWS
BÜLTE PLASTIQUES
We manufacture: All the standard screws, cheese, pan, wing, mushroom, flat, hex, Philips, raised & countersunk, knurled thumb, cup square […]
BÜLTE PLASTIQUES
New: Self-locking Nylon Nuts
BÜLTE PLASTIQUES
Bülte has added a series of plastic lock nuts : The self-locking nuts are suitable for applications that require extra security as they eliminate […]
BÜLTE PLASTIQUES
NEW WING SCREWS
BÜLTE PLASTIQUES
Specialist in plastic fasteners, BÜLTE screw range includes 5 new models of wing screws, offering more than 160 possibilities. The […]
BÜLTE PLASTIQUES
Round spacers
BÜLTE PLASTIQUES
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids […]
BÜLTE PLASTIQUES
Cheese head screw DIN 84
BÜLTE PLASTIQUES
Washer faced head screw on request. M12 : out of DIN standard. Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. Unit of […]
BÜLTE PLASTIQUES
Flat head slotted screws
BÜLTE PLASTIQUES
Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. > As regards screws, the thread length can vary according to the type […]
BÜLTE PLASTIQUES
Bülte locking and sealing washers
BÜLTE PLASTIQUES
Locking and sealing of your assembly washer + screw, or standard nut (category 8.8 or less). No Nylstop or lock nut required. Easier stock management. […]
BÜLTE PLASTIQUES
Round spacers
BÜLTE PLASTIQUES
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids […]
BÜLTE PLASTIQUES
Hex nuts DIN 934
BÜLTE PLASTIQUES
Good resistance to chemicals (PP). Good wear resistance and low coefficient of friction. Good resistance to shocks.
BÜLTE PLASTIQUES
Cheese head screw DIN 84
BÜLTE PLASTIQUES
Washer faced head screw on request. M12 : out of DIN standard. Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. Unit of […]
BÜLTE PLASTIQUES
Screw caps
BÜLTE PLASTIQUES
Protects from dirt. Protects metallic screws from corrosion and deterioration. Resists weather conditions and most chemicals. N.B. : depending on the […]
BÜLTE PLASTIQUES
Wing screws BPF 10
BÜLTE PLASTIQUES
Other lengths on request. For this screw in all Nylon, please refer to chapter "Screws".
BÜLTE PLASTIQUES
Three-stars grip BPF 184 (male)
BÜLTE PLASTIQUES
When using a male insert we recommend a lock nut if fully tightening down to the end of the screw. Optional cover for Three-stars grip BPF 184 : […]
BÜLTE PLASTIQUES
Three-stars plastimont body CO 184
BÜLTE PLASTIQUES
Plastic Knob in kit form. Make your knob yourself with Plastimont bodies ! Insert hex screw or nut made of steel, stainless steel, brass, nylon or […]
BÜLTE PLASTIQUES
Snap-in clip D12 (for assembly)
BÜLTE PLASTIQUES
N. B. : 1 000 pieces = 500 snap-in clips. Hole Ø = diameter of hole recommended.
BÜLTE PLASTIQUES
DOFA / Double locking and sealing washers
BÜLTE PLASTIQUES
Screws, bolts and nuts are locked. Sealing is achieved thanks to internal and external shoulders (the internal shoulder goes into the thread of the […]
BÜLTE PLASTIQUES
Black Nylon washers
BÜLTE PLASTIQUES
Other dimensions on request. For this prodcuts range, the RAL colours are not available.
BÜLTE PLASTIQUES
PTFE (Teflon) washers
BÜLTE PLASTIQUES
Very good resistance to the temperature from -200 to +260°C. Very good resistance to acids, alkalis, fuel and oil, nonflammable, UL 94 VO fire […]
BÜLTE PLASTIQUES
Soft PVC washers
BÜLTE PLASTIQUES
Low resistance to temperature from -35 to +50°C. Resistance to acids conditional, good resistance to acids to alkalis and oil. Other dimensions on […]
BÜLTE PLASTIQUES
Neoprene washers
BÜLTE PLASTIQUES
Resistant to tensile strength 6MPA. Tensile elongation from 200 to 300% according to the type of hardness. Good resistance to ozone. Hardness between […]
BÜLTE PLASTIQUES
Washers NFE 25-513 / serie
BÜLTE PLASTIQUES
The DIN / NFE norm has been created for metallic products, the dimensions of plastic products are close. Washers NFE 25-513 old norm NFE 27611. […]
BÜLTE PLASTIQUES
Self-adhesive washers
BÜLTE PLASTIQUES
Adhesive only suitable as an aid to mounting. Other dimensions on request. For products range, the RAL colours are not available.
BÜLTE PLASTIQUES
Locating washers
BÜLTE PLASTIQUES
Locating washers are manufactured in three different colours so that you can quickly identify the regular maintenance periods on machines : 1 = red […]
BÜLTE PLASTIQUES
Saddle washers / spacers
BÜLTE PLASTIQUES
Resists corrosion and most dilute acids. Absorbs shocks and vibrations. Combustibility UL94-V2. 2 x dimension "R" corresponds to tube […]
BÜLTE PLASTIQUES
Metric finishing washers RCC
BÜLTE PLASTIQUES
Protects surfaces and offers good electrical insulation. Absorbs shocks and vibrations. For use with countersunk head screws.
BÜLTE PLASTIQUES
Metric finishing washers STB20 - 4
BÜLTE PLASTIQUES
Protects surfaces and offers good electrical insulation. Absorbs shocks and vibrations. For use with cheese head screws.
BÜLTE PLASTIQUES
Metric finishing washers STB20 - 5
BÜLTE PLASTIQUES
Protects surfaces and offers good electrical insulation. Absorbs shocks and vibrations. For use with cheese head screws.
BÜLTE PLASTIQUES
Various nylon flat washers
BÜLTE PLASTIQUES
Various nylon flat washers Protect surfaces and offers good electrical insulation. Various nylon flat washers Resist corrosion and most dilute acids. […]
BÜLTE PLASTIQUES
Round spacers
BÜLTE PLASTIQUES
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids […]
BÜLTE PLASTIQUES
Saddle washers / spacers
BÜLTE PLASTIQUES
MATERIALS - COLOURS STANDARD : • Black Nylon. ON REQUEST : • Natural nylon / Black PE / PP / POM / Black POM. Minimum quantity on request. […]
BÜLTE PLASTIQUES
Metric hex tapped / threaded spacers
BÜLTE PLASTIQUES
The spacer allows a constant gap between 2 components. It is insulating and absorbs noise and vibrations. It can withstand variations in temperature […]
BÜLTE PLASTIQUES
PCB spacers with clips
BÜLTE PLASTIQUES
Designed for plates/ PCB’s/ etc… ø 4.0 mm. Good dimensional stability.
BÜLTE PLASTIQUES
Metric hex tapped spacers
BÜLTE PLASTIQUES
The spacers allows a constant gap between 2 components. It is insulating and absorbs vibrations. Its high resistance liquids provides for maximum […]
BÜLTE PLASTIQUES
Retaining spacers
BÜLTE PLASTIQUES
Used for pre-assembly of screws and bolts with no risk of loss. Good electric insulation. Ideal for insulation.
BÜLTE PLASTIQUES
Metric round tapped spacers
BÜLTE PLASTIQUES
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is heat resistant and can withstand variations in […]
BÜLTE PLASTIQUES
Hollow pins
BÜLTE PLASTIQUES
Good mechanical properties. Rustproof and light. Resistant to temperature between - 30°C and + 100°C.
BÜLTE PLASTIQUES
Hex lock nuts
BÜLTE PLASTIQUES
Good resistance to wear and weather conditions. Light and rustproof.
BÜLTE PLASTIQUES
Hex washer faced nuts
BÜLTE PLASTIQUES
Light and rustproof. Good resistance to wear and weather conditions. The washer provides a wider contact area.
BÜLTE PLASTIQUES
Wing nuts “EP”
BÜLTE PLASTIQUES
Light and rustproof. Good mechanical properties. Resists temperature from - 30°C to + 100°C.
BÜLTE PLASTIQUES
Wing nuts Form “B”
BÜLTE PLASTIQUES
Light and rustproof. Good mechanical properties. Resists temperature from - 30°C to + 100°C.
BÜLTE PLASTIQUES
Hex flat nuts
BÜLTE PLASTIQUES
Light and rustproof. Good mechanical properties. Temperature resistant from - 30°C to + 100°C.
BÜLTE PLASTIQUES
Hex dome nuts Form “A”
BÜLTE PLASTIQUES
Light and rustproof. Good wear resistance and low coefficient of friction. Good resistance to shocks.
BÜLTE PLASTIQUES
Slotted nut-plugs
BÜLTE PLASTIQUES
For finishing applications. Light and rustproof. Good resistance to wear and weather conditions.
BÜLTE PLASTIQUES
Round nuts 210
BÜLTE PLASTIQUES
For finishing applications. Manual tightening. Light and rustproof. Good resistance to wear and weather conditions. Model with male insert on request.
BÜLTE PLASTIQUES
Round nuts 325
BÜLTE PLASTIQUES
Manual tightening. For a perfect finish. The good mechanical, electrical and thermal properties of Polyamide are reinforced by glass fibre.
BÜLTE PLASTIQUES
Knurled thumb nuts form A
BÜLTE PLASTIQUES
Light and rustproof. Good mechanical properties. Resists temperature from - 30°C to + 100°C.
BÜLTE PLASTIQUES
Washer faced wing nuts
BÜLTE PLASTIQUES
Light and rustproof. Good resistance to wear and weather conditions.
BÜLTE PLASTIQUES
Deco round nuts
BÜLTE PLASTIQUES
Manual tightening. For a perfect finish. The good mechanical, electrical and thermal properties of Polyamide are reinforced by glass fibre.
BÜLTE PLASTIQUES
Mushroom head screws NFE 25-129
BÜLTE PLASTIQUES
Unit of sale : 1 000 pieces. Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. > As regards screws, the thread […]
BÜLTE PLASTIQUES
Flat head screws D10
BÜLTE PLASTIQUES
Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. > As regards screws, the thread length can vary according to the type […]
BÜLTE PLASTIQUES
Phillips head screws
BÜLTE PLASTIQUES
Lengths 15 and 17 mm - 5 mm non threaded under the head. > As regards screws, the thread length can vary according to the type and the overall […]
BÜLTE PLASTIQUES
Washer faced hex head screws PLAS 187
BÜLTE PLASTIQUES
M6 on request. Minimum quantity : 10,000 pieces.
BÜLTE PLASTIQUES
Knurled thumb screws 651
BÜLTE PLASTIQUES
MATERIALS - COLOURS STANDARD : • Natural Nylon. ON REQUEST : • Black Nylon / Nylon glass filled / PP / PE / PVDF / PC. Minimum quantity on […]
BÜLTE PLASTIQUES
Knurled thumb screws 654
BÜLTE PLASTIQUES
New : M4 - on request Unit of sale : 1 000 pieces. Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. > As regards […]
BÜLTE PLASTIQUES
Knurled thumb screws PLAS 81
BÜLTE PLASTIQUES
Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. Other lengths on request.
BÜLTE PLASTIQUES
Binder posts M6
BÜLTE PLASTIQUES
l = 10 or 15 mm depending on the model. Other lengths on request. Unit of sale : 1 000 pieces.
BÜLTE PLASTIQUES
Hex socket grub screws DIN 913
BÜLTE PLASTIQUES
Unit of sale : M5 to M10 : 1000 pieces. M12 : 500 pieces. M14 to M24 : 100 pieces. > As regards screws, the thread length can vary according to the […]
BÜLTE PLASTIQUES
Violin head screws Form “B”
BÜLTE PLASTIQUES
Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. > As regards screws, the thread length can vary according to the type […]
BÜLTE PLASTIQUES
Wing screws PLAS 31
BÜLTE PLASTIQUES
NEW PRODUCT Other lengths on request.
BÜLTE PLASTIQUES
Triangular head screws
BÜLTE PLASTIQUES
Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. > As regards screws, the thread length can vary according to the type […]
BÜLTE PLASTIQUES
Four-stars screws PLAS 71
BÜLTE PLASTIQUES
The new four-stars screws from BÜLTE are perfectly adapted for manual assembly thanks to the special shape of their head, making them ideal for […]
TITANOX
Panel fasteners
TITANOX
Are used directly as pre-assembled spring-loaded panel fasteners.Type : PFC2,PFS2,PFC2P, PF30,PF31,PF32, PR10,PS10,N10, F10,PTL2,PFK, PF11,PF12,PFHV
TITANOX
Standard Rivet
TITANOX
Universal rivets for quick assembly of different materials.
TITANOX
Multi-grip rivet
TITANOX
All-purpose rivet featuring a wide gripping range and good runoff watertightness.
TITANOX
Special blind rivet
TITANOX
Folding blind rivet : Aluminium rivet for assembly on soft materials (wood, plastic...). Grooved blind rivet : Rivet for assembling soft materials in […]
TITANOX
Self-clinching nuts
TITANOX
Strong internal threads in sheets as thin as 0.8 mm. Thread size M2 to M10.The self-locking PEMFLEX design provides MIL-N-25027 locking performance […]
TITANOX
Self-clinching studs
TITANOX
Can be flush-mounted, high strength studs, for stainless steel sheets, with pilot pins, with large or low flush-head.Type : FH,FHA,FHD, FHL,FHLS,FHS, […]
TITANOX
ORLOCK structural rivet
TITANOX
Blind fastening with double chuck lock for assembling thin parts without damage. It is dust- and runoff waterproof. Type : LD, LL, LK, LNP, LHD
TITANOX
Mass continuity cage nut
TITANOX
Float folding angles penetrate the painting on the support, thereby ensuring mass continuity when gripped.
TITANOX
Threaded standoffs
TITANOX
Flush-mounted head standoffs with thru-hole threads or blind threads. Standoffs for stainless steel or ultra-thin sheets.Type : SO,SOA,SOS, TSO,TSOS, […]
AMECA
AMELOCK self-locking nut
AMECA
AMELOCK is a safety nut whose locking part is obtained by deformation of an AMECOIL AF thread insert. AMELOCK has numerous advantages: Eliminates […]
AMECA
Flat headed cylindrical “AMSERT”
AMECA
Cylindrical flat headed embedded.
Users who saw this also viewed
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
