Brass compression limiter CL800

Other fixture elements

Ask for a quote

Presentation

Series CL800 Brass: The Series CL800 is machined from 360 brass. Similar to the CL600, the CL800 can be molded in or pressed into an assembly.

The applications for SPIROL’s brass and aluminum Compression Limiters are very similar, however to accommodate the same class/grade bolt, the brass Limiters have a larger wall thickness due to the material’s lower yield strength.

While this increases the size and weight of the Limiter as compared to the CL600, the thicker wall does provide more bearing surface for the mating component.

The most common reason a designer may choose the CL800 is for those applications that require a shift away from aluminum on the galvanic series chart to make the Limiter more noble. The CL800 is rated for use up to ISO Class 10.9/Grade 8 bolts.

OTHER PRODUCTS OTHER FIXTURE ELEMENTS FROM SPIROL S.A.S.

Carbon steel compression limiter CL350

Ask for a quote

Plastic part compression limiter CL600

Ask for a quote

Aluminum compression limiter CL601

Ask for a quote

Standard Wall Spacers | Series SP100

Ask for a quote

Heavy Wall Spacers | Series SP150

Ask for a quote

Special Spacers and Rolled Tubular Components

Ask for a quote

Check out all the products from other fixture elements from SPIROL S.A.S.

INTERNET USERS ALSO CONSULTED ON THE CATEGORY OTHER FIXTURE ELEMENTS

Clamps 351019

Ask for a quote

Araymond : Assemblages - ARAYMOND - Clip Plastique Pour cable ou Tube - Plastic Cable Clips - Support 1 Tube Pour Goujons - Stud Cable Clips For 1 Tube

Ask for a quote

Araymond : Assemblages - ARAYMOND - Clip Métal Pour Panneaux - Metal Panel Clips - Fixations d'habillage

Ask for a quote

Sealing : Chemical - Threaded Rod - A4 Stainless Steel

Ask for a quote

Quick Release Fasteners 2700 Series

Ask for a quote

Anti-suction valve for Rafale gun

Ask for a quote

Check out all the products from category other fixture elements