Anton Paar France

Automated tap density analyzers: Autotap

Automated tap density analyzers: Autotap - Anton Paar France

Automated tap density analyzers: Autotap - Composition of liquids and density

Automated tap density analyzers: Autotap - produit présenté par Anton Paar France

Automated tap density analyzers: Autotap

Composition of liquids and density

“ Ensure the quality of raw materials and predict the flow behavior of powders Autotaps and Dual Autotaps have been used around the world for decades to provide customers with consistent, reliable bulk density and flowability values - essential knowledge for measuring pharmaceuticals powders, metal powders, food powders, pigments, etc. Accomodates a wide range of graduated cylinder sizes for full flexibility The amount of sample you have available to test will define the graduated cylinder size you use. It is always recommended that the initial volume fill between 70% and 95% of the cylinder. Autotaps and Dual Autotaps accomodate any single-piece glass-graduated cylinder with a hexagonal base. The tapping platforms have hole patterns and adjustable hold-down clamps so that any graduated cylinder from 5 mL to 500 mL may be used. There is also an adapter should you need to measure in a 1 L graduated cylinder. Operates in accordance with a large number of international standard test methods The design of Autotaps and Dual Autotaps ensures compliance with all internationally recognized standard test methods describing the use of tapped density to determine bulk density involving a device capable of ensuring a drop height of 3 mm, a tapping frequency between 250 and 300 taps per minute, and the use of a specific type of gaduated cylinder. ”

Ask for a quote

Presentation

The Autotap and Dual Autotap tapped density analyzers for powders are simple to use, automated devices which comply with a large number of internationally recognized standard methods. They provide a high level of test method control with a user-selectable, lockable number of taps. Tapping rate and drop height are fixed to provide consistent results from sample to sample. A large range of sample sizes can be accommodated with the use of a number of different graduated cylinder sizes. Single and dual station designs are available to fit your lab’s throughput needs. Single station 220V/50HZ :

One automatically rotating tapping station
260 taps per minute
3 mm drop height

Dual station 220V/50HZ :

Two automatically rotating tapping stations
260 taps per minute
3 mm drop height