Round column drills Geared Transmission AX-40

IBARMIA mod. AX-40       Rotating and tilting table   Geared head   9 spindle speeds   3 automatic feeds   Mechanical clutch   Depth scale and adjustable depth stop   Speed plate and selecting levers on head front   Gear box lubrication by automatic pump   Automatic tool ejector   Built-in low voltage electrical equipment in machine   Emergency STOP push button   Coolant systema and worklight   Rotating and Tilting table   Right/Left turn   Drill guard with microswitch*   CEE Norms   Colour combination of RAL7004 and RAL7466       Technical characteristics:   Maximum drilling capacity in steel St.60 40 mm. Maximum drilling capacity in cast iron 200 Brinell 45 mm. Maximum tapping capacity in steel St.60 M 33. Maximum tapping capacity in cast iron 200 Brinell M 39. Morse Taper MT MT-4. Maximum spindle stroke (drilling depth) 180 mm. Main motor power 3HP (2,2 Kw). Coolant pump motor power 0,10HP (0,07 Kw). Transmission Gear box. Number of speeds 9. Speed range with motor at, 1500 r.p.m. 50 Hz 132-1852 rpm. Feed Automatic. Nr. of automatic feeds 3. Automatic feed range 0,1-0,2-0,3. Worktable dimensions (LxW) 480x480 mm. Column diameter 150 mm. Distance from spindle centre to column face 350 mm. Distance from spindle nose to table surface 80-880 mm. Net weight 490 Kg. Gross weight with packing 540 Kg. Packing dimensions (length x width x height) 2,34x0,61x1,16 m     Optional equipment:   MCC-150: Co-ordinate table over support X= 500/Y= 300 mm   RS: Automatic feed reversing system for tapping   RPF: Pitch controlled tapping with braking system by speed inverter   RPF+TAK:RPF with digital rpm counter   HGP:Master guide spindle and nut set   HB:Hydro-pneumatic power feed unit   VE:Variable speed by electronic variator   VE+TAK:Continuos speed by electronic variator with digital rpm counter   UC:Union, dragging cone and assembly for multi-spindle head   GM:Multi-spindle head guide rod   CN:Pneumatic counterbalance   SC: Column riser (200 mm)   LBC: Digital rea-out scale   FL-116: 116 mm opening fixed vice   FL-157: 157 mm opening fixed vice   P16-M4: Drill chuck from Ø1 to Ø16 mm Morse 4 taper