Schleuniger's PullTester 26 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 26 is specially suited for quality assurance in a production environment.
The measured values are indispensible parameters for quality control and assurance (e.g. IEC 60352-2 standard). Certain standards require measuring at the maximum measured force (destructive test). In addition to the base model PullTester 25, the PullTester 26 can also perform non-destructive tests (hold to a specified force). It also features an additional pulling mode where the wire is pulled until the required target value is reached, then hold in this position and as a further step then pulled until the crimped connection breaks.
Two Individual Displays :
Two individual displays show all necessary data: Measured values are indicated in the upper display and operators are automatically prompted to save them after each job. All job settings (e.g. target value) are permanently visible during operation in the lower LCD display. Its four lines make menu navigation easier than ever. Terminal names are clearly stated simplifying the choice of a measuring sequence.
Measure Highest Accuracy :
The versatile PullTester 26 has two measuring ranges which are individually calibrated enabling the use if its 500 N (110 lb.) scale for small wires, while easily switching to its 1000 N (220 lb.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications.
The standard 12 position terminal holder accommodates a wide variety of terminals to suit most applications, however, a variety of terminal holders are available upon request.
All you need to run your factory !
