All you need to run your factory !
Specially designed for grooved shafts / rollers / pins. Designed with lip in order to facilitate fitting and removal. Work like anti-friction washers.
Optical encoder monoditectional with 50 pulse every turn or bidirectional with 25 pulse every turn built for our motor type 615, 742.
Power 6-24 Vdc.
Output open collector max 30 Vdc.
The motor 615 turn CCW connecting positive voltage to M1. The encoder is sold only assembled with our motors.
The motor turn CW or CCW depending the output 1 or 2 go up before.
If not provided in the control card, it is necessary to connect a pull up resistance between each output and the positive power supply. The value of this resistance is calculated as 1/10 of the card input impedance and in any case must not be lower than 1 KOhm.
It is possible to have other output configurations.
INTERNET USERS ALSO CONSULTED ON THE CATEGORY INCREMENTAL ENCODERS
See also
