HIGH SOLID RANGE

Performances

• Substrates : steel/cast iron phosphated or granulated steel and pretreated non-ferrous metals
• Gloss : > 90 under 60°C
• Pot life : > 3h
• Good resistance to shocks : > 50cm/kg
• Corrosion strength : > 500 h and 1000 h depending on the artificial weathering TTS
• Light fastness : > 500 h for UV B for gloss retention of < 20% and a dE<2

                                     >  1000 h in WOM for gloss retention  < 20% and a dE<2

• Chemical resistance : high resistance to fuel oil, fertilizers, pesticide, engine oil, antifreeze, …

Advantages

• Technical performances : hardness, scratch resistance, UV and bad weather resistance
• Application : wet on wet possible
• Application efficiency : 80 microns/layer –hiding power – time saving
• Decrease of the global cost €/m2 compared to a standard system
• Use of spraying equipment as airless and air-mixte
• Strong reduction in VOC emissions in compliance of the European directive 2004/42/CE

PRIMERS

Families  >>  Two-components Epoxy HES  /  Two-components Polyurethane HES

Technical References  >>  BeckryPrim HES GS03000AC  /  BeckryPrim HES JB03000AC

Colors  >>  Light Grey  /  Yellow

Hardener  >>  CA 00051  /  CP 03007

Drying  >>  Air or forced-air system  /  Air or forced-air system 

FINISHES

Families >>  Two-components Polyurethane HES

Technical References  >>  BeckryLac 80 BR28 HES JE03000FP

Colors  >>  all

Hardener  >> CP 03007

Drying  >>  Air or forced-air system

The choice of a suitable solution for your every need !