CATALOGUES
WHITE PAPERS
PRESS RELEASES
...
Sawblade holder
Use: For holding sawblades on Weldon toolholders Design of shank according to DIN 1835-B well […]
Find out more
Cone Wiper
For cleaning tool holders.
Pull Stud
Pull studs are an important link between machine and tool. The requirements concerning accuracy, […]
Coolant Tubes
– Prevents spindle from being spoiled – Must be used with all coolant through HSK spindles – Dual […]
Blank adapter
Use: For manufacturing special tools in your factory Design: HSK is hardened and ground, the […]
Quick change tapping chucks
Use: For tapping preferably on NC milling machines Advantages: – axial length compensation – […]
Shrink Fit Chuck: DIN 69893
Use: Suitable for all shrinking units. – Fine-balancing by set screws possible – Included in […]
Shrink Fit Chuck
Use: Suitable for all shrinking units. – Heat resistant hot-working steel – Hardened 54-2 HRC – For […]
Combination shell end mill arbor: DIN 69882-2
Use: For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 […]
Power Shrink Chuck: DIN 69893
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed […]
Mini Shrink extra slim
– Extreme slim design – No disturbing edges – Highest runout accuracy: 3 µm – Also jobs difficult to […]
Power Collet Chuck
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed […]
Whistle Notch toolholder: DIN 69882-5
Use: For clamping cutters with cylindrical shank and inclined flat according to DIN 1835-E and DIN […]
Shrink fit machines: Power Clamp Economic Plus NG
– With intelligent NG coil – Single chuck version – With integrated contact cooling – Power: 13 kW […]
Shrink fit machines: Power Clamp Economic Plus
– Avec inducteur standard – Version uni-poste – Station de […]
Shrink fit machines: Power Clamp Economic
– With standard coil – Single chuck version – Without cooling – Power: 13 kW – Mains voltage: […]
Shrink fit machines: Power Clamp Basic
– Power: approx. 10 kW – Mains voltage: 3x360-500 V, 16 A – Tools: solid carbide and HSS from Ø 3-32 mm
Shrink fit machines: Power Clamp Mini
– Power: approx. 3 kW – Mains voltage: 230 V, 50-60 Hz – Tools: only solid carbide from Ø 3-16 mm – […]
Shrink fit machines: Shower Cooler
– Suitable for all contours – Drying by rotating air nozzles – Supplementing existing cooling […]
Shrink fit machines: Easy Set
– Quick and simple presetting of the protruding length of the tool – Maximum protruding length: 150 […]
Unshrinking device
For broken tools
Shrink fit machines: Power Clamp Comfort
– With standard coil – Rotary table with 3 stations – With integrated contact cooling – Power: 13 […]
Shrink fit machines: Power Clamp Comfort NG
– With intelligent NG coil – Rotary table with 3 stations – With integrated contact cooling – […]
Shrink fit machines: Power Clamp Preset NG
– With vertical stop for length presetting – With intelligent NG coil – Single chuck version – With […]
Shrink fit machines: Power Clamp Profi Plus NG
– For intelligent NG coil – Rotary table with 3 stations – With […]
Shrink fit machines: Power Clamp Economic NG
– With intelligent NG coil – Single chuck version – Without […]
Shrink and cooling sleeve
– Protects Mini Shrink chucks from overheating – Extends Lifetime of shrink fit chucks – Secure and […]
Reduction Sleeves
Use: For clamping small shanks in chucks with Ø 5/16 or 8mm ID’s. First step: press reduction sleeve […]
Adapter for Morse taper with tang
Use: For holding tools with Morse tapers and tang according to DIN 228-1 form B – Fine-balancing […]
Adapter for Morse taper with thread
Use: For clamping tools with Morse taper with thread according to DIN 228-1 form A – Fine-balancing […]
Adapter for Morse taper with tang: JIS B 6339 BT 40 form AD
Use: For holding tools with Morse tapers and tang according to DIN 228-1 form B similar to DIN […]
Adapter for Morse taper with thread: SK 40 form AD DIN 69871
Use: For clamping tools with Morse taper with thread according to DIN 228-1 form A similar to DIN […]
Adapter for Morse taper with tang: SK 40 form AD DIN 69871
Use: For holding tools with Morse tapers and tang according to DIN 228-1 form B similar to DIN 6383 […]
Holder for adapter: SK 50 form AD DIN 69871
Use: For holding tapers according to DIN 69871 AD SK 40 and JIS B 6339 BT 40 with taper – Included […]
Balancing machines: Tool Dynamic TD 1002
– At reasonable price (no PC) – Table and complementary machine – Ideal for mould makers – For small […]
Balancing Adapter
– µm precise clamping for highest measuring accuracy and repeatability – Easy and quickest changing […]
Balancing machines: Tool Dynamic Preset
Balancing and presetting are key elements of modern manufacturing. It is obviously a good idea to […]
Balancing machines: Tool Dynamic 2002 Comfort/Comfort Plus
If you want to use the Tool Dynamic frequently and keep the balancing time as short as possible, you […]
Balancing machines: Tool Dynamic 2002 Economic Plus
For measuring in two planes (dynamic). Long tools must be balanced in two planes in order to eliminate […]
Balancing machines: Tool Dynamic 2002 Economic
Works very precisely and with an adapter system which can be used for all kinds of tool holders. […]
3D-Sensor new generation
Its distinguishing features are improved mechanics and a new and compact design. Compact and easy […]
Zero Master Analog
The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the […]
Sensors: Centro
Quick and precise centering of bores and arbors Clamped into the spindle of the milling machine, the […]
Universal 3D-Sensor
he Universal 3D-Sensor is a very precise and versatile measuring instrument for milling and EDM […]
Digital 3D-Sensor
The Digital 3D-Sensor is a further development of the time proven mechanical 3D-Sensor. It serves for […]
3D-Sensor New Generation
The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its […]
Set of balancing screws
For fine-balancing of all tool holders with balancing threads M 6 (e.g. shrink fit chucks from HAIMER) […]
Back up screws for shrink fit chucks
– Hexagon socket on each end – can always be reached – Flats on sides for optimized coolant drainage – […]
Back up screws long for shrink fit chucks
High Precision Collets ER
– High polished finish for extra accuracy and long life, especially when clamped in HAIMER ER chucks – […]
OZ Collets
Collets with slits from both sides. For cylindrical shanks with tolerance h10.
HG-Collets and HG Cone Wiper
For clamping tools with cylindrical shank with utmost precision in HG chucks.
Short drill chuck
For high-precise clamping of tools with cylindrical shank with newly developed collets. Very useful for […]
Quick change tapping chuck
For tapping preferably on NC milling machines.Axial length compensation on tension and […]
Tool dynamic preset
Combination shell end mill arbor
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
Balancing arbor
– To balance tools with cylindrical bore – Precise centrically clamping for highest repeatability – […]
Balancing Index Rings
For fine-balancing of all tool holders with cylindrical outer diameter (diam. A) The balancing index […]
Collet for Haimer Power Collet Chuck
– High runout accuracy: 0.005 mm at 3 x D – Superior clamping strength – Fits HAIMER Power Collet […]
Tool assembly device Tool Clamp
– Secure tool assembling – Minimum locking force needed – Quick-change function for different taper […]
Buyers
Suppliers
All you need to run your factory !
