All you need to run your factory !
For heavy loads Galvanized wire rope grade 1770N/mm² or 1960N/mm² Special length and diameter on request High flexibility and working load limit WLL from 500 to 8 000 kg
“ Two factory-set thermostats in one casing ”
*NO and NC in one casing
*Default temperature settings
*High switching accuracy
*Clip fixing
Two factory-set thermostats in one casing:
Fix-Thermostat/Contact breaker (NC) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value.
The contact opens when temperature is rising.
Fix-Thermostat/Contact maker (NO) for regulating filter fans, heat exchangers or for switching signal devices when temperature limit has been exceeded.
The contact closes when temperaure is rising.
Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.
Approvals: UL File Nr. E164102
INTERNET USERS ALSO CONSULTED ON THE CATEGORY THERMOSTATS
See also
