Cut Strip Terminate : CrimpCenter 64

Fully Automatic Crimping Machine with 4 Stations :

The CrimpCenter 64 is a fully automatic swivel arm crimping machine with 4 processing stations. At a maximum feed rate of 12 m/s (39.4 ft/s), the CrimpCenter 64 allows high-quality crimping, sealing, twisting and tinning of wires from 0.15 to 6 mm² (26 - 10 AWG) at maximum productivity.

Various configuration possibilities make the CrimpCenter 64 one of the most flexible machines in its class. From Seal to Seal applications to twisting & tinning or doubling crimp applications, the flexible plattform of the CrimpCenter 64 can be configured according to your production requirements.

With the optionally available thin & short wire processing kits, the CrimpCenter 64 easily processes wires down to 0.05 mm² (30 AWG) at a minimum wire length of only 35 mm (1.38'').

Minimize Setup Time - Maximize Productivity :

All CrimpCenter models excel with exceptionally high processing speed. With a unique system to reduce change-over times for cut strip terminate (CST) machines, Schleuniger has taken into account that productivity is more than just speed and that short setup and change-over times can significantly increase your output.

With the innovative ToolingShuttle 60 (a mobile quick-change unit), change-over of a crimping station takes less than 30 seconds. Depending on how often you change applications, this system can increase your productivity by 30% and more.