Ask for a quoteReceive DocumentationContact the supplier
More welding power than ever beforeThe PFC (power factor correction) gives 30% more welding power from the same fuse size.DescriptionCaddy Mig C160i has an efficient built-in inverter power source. Inside the side panel there is a wire feeder as well as space for the wire spool.Spool type neededWire spool size: inner diameter 51 mm, external diameter 200 mm and width 55 mm.Recommended wires/gasESABs OK Autrod 12.51 diameter 0.8 mm, for welding mild steels. A high quality copper coated wire for excellent mild steel welding results. ESABs Coreshield 15, diameter 0.8 mm, for welding mild steels. A cored wire that builds a slag protection and therefore needs no gas to weld a large variety of mild steels. Change polarity for best result. Caddy® C160i is used for MIG/MAG welding of mild steels for repair, maintenance and assembly work. This easy to use and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move.Advanced design gives you optionsAdvanced and modern materials provide, lightweight, durable and impact resistant housing with inbuilt cable wraps for ease of transportation. The low weight of 11.4 kg makes it easy to move to different indoor or outdoor worksites.ApplicationsThe performance of this unit makes it a superb choice for mild steel welding applications. Perfect for tradesmen working with repair, maintenance or assembly work in the workshop, outdoors or at different sites. Single phase mains connection makes it easy to find a electricity supply. Works equally as well when powered by a portable generator.* The Caddy® Mig C160i has optimized performance for welding with 0.8 mm wire on mild steels using solid or cored wires.Automatic function and simplicityWith Caddy® Mig C160i you only need to set the plate thickness before starting to weld. Hotter or colder welds can easily be obtained by using the heat adjustment knob.
Easy to use - Set material thickness and start weldingThe low weight and small size makes it easy to get to the worksite, indoors or outdoorsHas PFC (power factor correction) and complies to European "Harmonics" demands = uses energy efficiently