CATALOGUES
WHITE PAPERS
PRESS RELEASES
...
Column-Spacer for press fitting
This column has been specially designed to serve as spacer. It can be fitted quickly and easily and thus […]
Find out more
"Ball Lock"® ball type quick-release attaching system
Ball Lock”® ball type quick-release attaching system. Change your assemblies in 60 seconds or less.
Inspection stamp
Allows checking the tap which must be fitted with an AMECOIL thread insert.
Conventional series installation
Multiple-dimension with tip + threaded pin.
Amecoil SR series installation
Multiple-dimension with threaded pin.
“AMPLAST” inserts for plastics
For the execution of professional assembly by screws of low resistance and fibrous materials: • Plastics […]
Spring type threaded push rods
Threaded push rods are used for indexing and positioning necessary for mechanical assemblies. They can […]
Plug tap
Entry on 2 leads. For through holes and blind holes. Tapping by hand or by machine.
Machine tap for 35° to 39° right-hand helical grooves
Entry on 2 to 3 leads. For blind holes. For all materials which are difficult to machine.
"AMSERT" hexagonal and mixed embedded nuts
HEXAGONAL CYLINDRICAL FLAT HEAD EMBEDDED OPEN NUT.
“AMSERT” thin countersunk head embedded nuts
Thin cylindrical countersunk head embedded open nut.
"AMSERT" thin countersunk head embedded nuts
Thin cylindrical countersunk head embedded open nut
Flat headed cylindrical “AMSERT”
Cylindrical flat headed embedded.
Flush nut for press fitting
The flush nut is used in numerous assembly application requiring the fitting of a nut in the material. […]
Self-crimping nut for press fitting
To obtain a screwed assembly with a high load capacity for sheet metal parts with a thickness of 0.8 mm […]
Slotted self-locking nut
The slotted nut is used in numerous assembly applications subjected to vibrations, in places which are […]
Taper tap
Entry on 4 leads. For through holes and blind holes. Can be used on all metals and for high precision tapping.
Straight groove machine tap with "GUN cut" entry
Entry on 4 leads. For through holes. The "GUN" cut drives the chips out on the other side.
Standard
Because of its optimal dimensions, the SR series keeps all the characteristics of the conventional […]
Self-locking
This self-locking series corresponds in all points to the conventional series, the screw threads being […]
Self -tapping bushes
The bush with its cutting slot is a self-tapping attaching part which ensures screwed assemblies for […]
Key type bushes
The CLAV-SERT thread inserts consist of rigid one-piece bushes Depending on the diameter of the […]
Self-crimping stud for press fitting
For assembly by screwing with high characteristics (tearing stresses, various loads, etc.) in thin sheet […]
Weld lugs
The weld lugs are available in numerous dimensions and types in order to meet all your specific welding […]
Ball type pins
The ball type pins are used for all applications requiring the hand to be quickly removed after […]
Drilling
The hole is drilled using a commercially available standard drill bit.
Self-crimping cage nut (Square or oblong indenting device)
- Dimensions: M3 to M12
AMELOCK self-locking nut
AMELOCK is a safety nut whose locking part is obtained by deformation of an AMECOIL AF thread insert. […]
Plastic strips
The packing of AMECOIL thread inserts on plastic strips considerably improves working conditions for […]
Extractor
AMECOIL extractors are used to remove thread inserts which are incorrectly laid.
The AMECOIL kits
AMECOIL® SR kits are indispensable for repairing all types of defective tapped holes. Regular workshop […]
Buyers
Suppliers