All you need to run your factory !
This product is temporarily unavailable.
Think about consulting similar products.
The VAPORAD steam radiant panels are used to heat industrial or civil buildings that are particularly concerned with fire prevention. This system is able to completely fulfil the requirements of a...
HEMPEL’S GALVOSIL FIBRE 15750 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
It has excellent chemical resistance within the pH range 6-9. For service temperature range, see below. Applicable by airless spray. Offers cathodic protection of local mechanical damage.
Hempel's Zinc metal pigment 97170 is in full compliance with ISO 3549 and ASTM D520 type I,
Hempel's Zinc metal pigment 97140 is additionally in compliance with ASTM D520 type II.
Recommended use:
As a general purpose, heavy-duty, rust-preventing primer.
As a single, complete coating for long-term protection of steel exposed to moderately to severely corrosive environment and to abrasion.
In areas (e.g. corners) where high film thickness (up to 200 μm dry film thickness) locally can be expected.
In compliance with SSPC-Paint 20, type 1, level 2 and ISO 12944-5.
Service temperature:
Resistant to permanent (non-cyclic) dry temperatures as well as occasionally dry peak temperatures up to maximum: 500°C/932°F.
It is of advantage to apply a topcoat of HEMPEL'S SILICONE ALUMINIUM 56914 in case of service temperatures above: 400°C/752°F.
Resistant to cyclic dry temperatures up to 400°C/752°F.
Availability:
Part of Group Assortment. Local availability subject to confirmation.
See also
