CATALOGUES
WHITE PAPERS
PRESS RELEASES
...
VULKOLLAN Combined Bearing Type V 4000 AP
Weight 0,20 kg incl. flange plate
Find out more
VULKOLLAN Combined Bearing Type V 6250 AP
Weight 0,80 kg incl. flange plate
VULKOLLAN Combined Bearing Type V 1432 AP
Weight 9,20 kg incl. flange plate
VULKOLLAN Combined Bearing Type V 1792 AP
Weight 12,2 kg incl. flange plate
Precision Combined Bearing with combined bolt Type KB PR
Advantages: free choice of bolt assembly the bolt can be welded or screwed to your design Washers […]
Adjustable Combined Bearing unit Type JC for all standard...
Advantages: Min. clearance between bearing unit and profile Higher positioning accuracy […]
Jumbo Combined Bearing Axial Bearing adjustable
The adjustment of dimension (A) is obtained by turning the bolt of the side guide roller. The bolt is […]
Precision Combined Bearing Type PR-P
The adjustment of dimension (A) is obtained by means of an insert positioned between the main body of […]
Precision Combined Bearing with combined bolt and...
Advantages: free choice of bolt assembly the bolt can be welded or screwed to your design *Oilamid […]
Combined Bearings
For economical designs in machines, lifting and handling systems. Advantage of the Combined Bearing […]
Axial Bearing fixed
Relubrication only for types 4.055 - 4.063
Precision Combined Bearing Type PR
Advantage: less clearance between bearing and profile Relubrication only for types PR 4.055 - PR 4.063
High temperature Combined Bearing Type HT
Combined Bearings of range HT are made for high temperature applications up to 250 ° C. The Combined […]
Telescopic fork, type TZ up to 1000 kg
rigid steel profiles with precision bearings drive motors available in DC, AC or Hydromotors […]
Telescopic forks type 2 TZ
Technical characteristics: Load capacity: 1,000 kg Fork: TZ Stroke: 1,400 mm Basic length: 1,200 […]
Telescopic fork, reinforced Type VTZ, up to 1500 kg
reinforced version for longer strokes with less deflection rigid steel profiles with precision […]
Telescopic fork, modified Type TZM, max. 1000 kg Type...
Lift mast
Unique type variety (20,000 different styles). Long service life. Convincing technic. Optimum […]
Wheel blocks Type RA-20-160 guided version
driven Load capacity 2,000 kg/wheel all housings in galvanized version Advantages: rigid not […]
Wheel Blocks Type RN-10-100
not driven load capacity 1,000 kg/wheel all housings in galvanized version Advantages: leveled […]
Wheel blocks Type RA-10-100
driven load capacity 1,000 kg/wheel all housings in galvanized version Advantages: leveled floor […]
Wheel Blocks Type RNL-10-100 floating version
not driven load capacity: 1,000 kg/wheel all housings galvanized
Wheel Blocks Type RAL-10-100 floating version
driven load capacity: 1,000 kg/wheel all housings galvanized
Coil turning units Type C 5 W
Technical characteristics: Load capacity: 5,000 kg Coil Ø: 1,600 mm Coil length: 1,200 mm […]
Coil turning units type C 5/C10
The space saving turning unit for 5 t und 10 t coils. Coil turning units of type C 5 and C 10 are […]
Coil turning units Type C 5 WD
Technical characteristics: Load capacity: 5,000 kg Space needed: 2,370 mm Coil Ø: 1,600 mm Coil […]
Coil turning units Type C 10 WD
Technical characteristics: Load capacity: 10,000 kg Space needed: 2,750 mm Coil Ø: 1,900 mm Coil […]
Forks with folding back stop PalFix
to take up pallets in longitudinal and cross direction faster pallet handling safety in pallet stacking
Forks SlippFree
Slippfree is available as coating on forks or fork extensions. protection for carrying load less […]
Forks with reflectors
quality forks with reflectors on the side reflector positioned in a deepening to avoid scratch off […]
Folding forks
Folding forks are recommended for the following applications: fork lift trucks on roads at limited […]
Monorail Rail type SRF 5024
Weight per meter 6,2 kg lx 26.53 cm3 ly 4.40 cm3
Monorail Rail type SRF 8735
Weight per meter 11,5 kg lx 126 cm3 ly 13 cm3
The MONORAIL-system
With the MONORAIL-system it is possible to solve linear movements very economically. Advantage of the […]
Stainless steel lifter MONO, SIMPLEX, DUPLEX, TRIPLEX
load capacity up to 1.5t for fork lift trucks or stationary use hydraulically or elektromechanically powered
Pallet lifter PALI 10
load capacity: 1000 kg x 600 mm LC stroke: 850 mm euro pallets: 800 x 1200 mm stroke electro […]
Lifting and travelling unit
complete with electronic control units hydraulically or elektromechanically powered in combination […]
Precision Radial Bearing Type PR
Technical characteristics: outer rings are made of case-hardened steel UNI 16 CrNi 4 hardened at […]
Bearings fitting for Linde trucks
Load capacity C = 36.770N CO = 49.500N Dimension 30x75x22/24 Linde-No.* 000 924 9402 *The numbers […]
Monorail aluminium
Slide with MONORAIL profile in aluminium and a slide block made out of Oilamid*. Slide block with […]
Monorail Slide type MO 5025-GL-100
Weight 0,05 kg Slide made out of Oilamid
Robot tracks
Combination of 6-axis robot with state of the art linear module.precise, hardened LM guides.High […]
Quality forks ISO/FEM-suspension
Today the ISO/FEM-suspension is world-wide the most common way of connecting forks to the lift-truck. […]
Pallet lift
Innovative solutions for heavy load handling.Type: W-PH1-500.Load capacity: 500 kg. Load center: 600 […]
Lifter for palletizing
Lifter for palletizing with carriage and forks. The straddle legs are Adjustable and the straddle legs can be fixed.
Four port hose reel standard serial
For two thermoplastic welded double hose,with additional middle flange,available in Left or Right […]
Buyers
Suppliers
All you need to run your factory !
