Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below.
Recommended areas of use
-
Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint
-
Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat
Features
-
Primes hard, smooth surfaces ready for painting
-
Eliminates the need for costly shot blasting or grinding
-
One coat application: quick and easy to apply
-
Low odor
-
Superior performance demonstated by ISO testing to CE Mark EN1504-2
-
Easily applied by roller
Powerfloat Primer curing times:
The following is based on good ventilation and a floor temperature of 15 -20°C
-
With all epoxy coatings such as Watco Epoxy Gloss Coat or Safety Coat: Allow the Primer to dry for 16 hours, but no longer than 72 hours before overcoating
-
With Watco Concrete Floor Paint, Flexicoat and Safety Grip Flex: Allow the Primer to dry for at least 5 days before overcoating
-
With polyaspartic coatings such as Cold Set Coating or Safety Coat Cold Cure: Allow the primer to dry for at least 16 hours but no longer than 72 hours before overcoating