Test and Calibration Station | X-DOCK

Gas sensors

Case former SectionAdjustable on the box sizes by handlesThe operator picks the closed box and squares it, positioning on the middle machine shaft. With this operation the two width-wise flaps would...

“ THE ADVANTAGES OF BE ATEX Re-calibration of equipment Control and verification of I.P.E. Customised configuration of equipment ”

Ask for a quote

Presentation

The modular X-DOCK test and calibration station offers convenient and efficient management of Dräger portable gas detectors. Three versions are available: X-DOCK 5300, X-DOCK 6300 and X-DOCK 6600.

Through simultaneous and independent adjustments, calibrations and tests, the consumption of standard gas is reduced from 500 ml/min to 300 ml/min, as well as the test time.

In addition, as soon as the detector is inserted, it is automatically detected before its gas supply is adjusted. Once the device's display turns green, the detector is ready for use.

In addition, the X-DOCK stores all important data collected by the detectors that can be used for further evaluation. In this way, the user has an overview of all process steps.

In addition, it is possible to print out a test or calibration certificate using a printer compatible with this test and calibration terminal.

The Dräger X-DOCK has a 1-year warranty and operates in temperatures between 0 and +40°C. The Dräger X-DOCK weighs 2,460g (master and module combined).

The dimensions are 120 x 130 x 250 mm for the master station and 90 x 145 x 250 mm for the module.