Rodless pneumatic cylinders - Series Z

“ ✔ Reduced overall dimensions ✔ Long strokes ✔ Direct transmission force between piston and carriage ”

Ask for a quote

Presentation

The rodless cylinders of the Z series develop a direct force transmission between piston
and carriage.
They are designed for applications where long strokes are required.
They have been designed with reduced overall dimensions compared to standard cylinders with external
with external rod.
The guided version allows to work with free loads while offering a good resistance to transverse forces.
resistance to transverse forces.
The Z-series cylinders have adjustable dampers and are always equipped with a magnetic piston.
equipped with a magnetic piston. They can also be fitted with magnetic sensors.
The Z series is divided into 6 bores: Ø 18, 25, 32, 40, 50 and 63.

https://www.senga.fr/en/products-e-shop

Technical features

Fluid: filtered compressed air, lubricated or not Operating pressure: between 2 and 8 bar Operating temperature: between 0°C and +80°C (with dry air -20°C) Seals: polyurethane Maximum stroke: 6000 mm (for diameter from 18 to 63 mm) Materials: aluminium - anodised (guide carriage and heads); brass - deceleration pins; - Belts: internal: oil resistant polyamide - external: stainless steel AISI 304 - Tube: extruded profile, anodised aluminium alloy. - Piston: aluminium alloy. Diameters: between 18 mm and 63 mm - 18, 25, 32, 40, 50 and 63 mm