TriPress® is a triangular rapid fastening system that can be clinched into plastic and light metals. During the clinching operation, the two components of the TriPress® fastener connect together quickly and economically. It is available in the following designs: Triangular shank and knurl parallel with axis provide greater torsional strength. Circumferential locking flutes on triangular shaft generate high pull-out resistance. Combination of grooves and knurls permit positive-fit fastenings and achieve high torsional torques and pull-out forces (figure 4). So the fastener can be clinched into pre-prepared holes or injected as inserts into plastic housings.
OTHER PRODUCTS PRODUCTS ASSEMBLY FROM Arnold Umformtechnik GmbH & Co. KG