APPLICATIONS
Motor for radial or semi-axial submersible pumps, in wells with 6” diameter or bigger, basins or boosters for pressurization systems.
CHARACTERISTICS
Water filled rewindable submersible motor, with PVC or PE winding. Filling fluid: clean water with mono-propylenic glycol. Pre-filled motors, fill-up tools included. Flange and shaft protrusion in compliance with NEMA standards6”.Degree of protection: IP 68. Shaft entirely made of stainless steel AISI 431 Outer shell made of stainless steel AISI304 Bidirectional Kingsbury type axial thrust bearing Counterthrust bearing.Water lubricated radial bearings.Safety valve.A compensation membrane on the bottom of the motor ensures the balance between the internal and external pressures, along with the variation of the water volume due to the temperature. Standard, double seal system on rotor shaft: bi-directional mechanical seal in SiC-AlO+sand-guard with laminar seal
- Rotation: clockwise or counter clockwise without distinction
- Cable material suitable for use with drinking water.
- All motors 100% tested (test report supplied upon request).
- SAER submersible motors are suitable for use with frequency
changer. - You can address to our technical servicing for any further
information. - Max water temperature: PVC: 25°C, PE: 50°
All you need to run your factory !
