All products of MONTECH

End section GTB-200 with nose bar compl

Diverter roller knife-edge steel, ø 15 mm.

Find out more

End section GTB-800 with nose bar compl

Diverter roller knife-edge steel, ø 15 mm.

Find out more

End section GTB-200 with diverter roller ø60 comp

Diverter roller steel, ø 60 mm.

Find out more

End section GTB-300 with diverter roller ø60 comp

Diverter roller steel, ø 60 mm.

Find out more

End section GTB-400 with diverter roller ø60 comp

Diverter roller steel, ø 60 mm.

Find out more

End sections GTB-400K+T with diverter roller ø60

Diverter roller steel, ø 60 mm.

Find out more

End section w. diverter roller ø40 KTB-80K

End section w. diverter roller ø40 KTB-80K end drive compl. Diverter roller stainless steel.

Find out more

End section w. diverter roller ø40 KTB-105K

End section w. diverter roller ø40 KTB-105K end drive compl. Diverter roller stainless steel.

Find out more

End section w. diverter roller ø40 KTB-140K

End section w. diverter roller ø40 KTB-140K end drive compl. Diverter roller stainless steel.

Find out more

End section w. diverter roller ø40 KTB-185K

End section w. diverter roller ø40 KTB-185K end drive compl. Diverter roller stainless steel.

Find out more

End section w. diverter roller ø40 KTBD-105K

End section w. diverter roller ø40 KTBD-105K end drive compl. Diverter roller plastic POM.

Find out more

End section w. diverter roller ø40 KTBD-140K

End section w. diverter roller ø40 KTBD-140K end drive compl. Diverter roller plastic POM.

Find out more

End section w. diverter roller ø40 KTBD-250K

End section w. diverter roller ø40 KTBD-250K end drive compl. Diverter roller plastic POM.

Find out more

End section with nose bar TB/KTB-185 compl

Diverter roller stainless steel, nose bar radius 4 mm.

Find out more

End section with nose bar TB/KTB-250 compl

Diverter roller stainless steel, nose bar radius 4 mm.

Find out more

Connecting support GTB-200 compl

Connecting support GTB-200 compl.

Find out more

Connecting support GTB-300 compl

Connecting support GTB-300 compl.

Find out more

Galvanized steel sliding plate GTB-200 L=3000mm

1.5 x 173 x 3000 mm.

Find out more

Support vertical for motor V TB/LT/LTE

For Drive unit TB/TBD/TTBD vertical.

Find out more

Chassis TB/KTB-185 L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

Find out more

Chassis TB/KTB-80 for sliding plate L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends

Find out more

Chassis TB/KTB-185 for sliding plate L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends

Find out more

Chassis TB/KTB-250 for sliding plate L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

Find out more

Conveyor system for manufacturing and logistical processes

 Flexible, simple and user-friendly; the possibilities are nearly limitless. Montrac has been […]

Find out more

Chassis KTB-45 L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

Find out more

Chassis TB/KTB-80 L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends

Find out more

Chassis TB/KTB-105 L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

Find out more

Chassis TB/KTB-140 L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

Find out more

Sliding plate stainless GTB-200 L=3000mm

1.5 x 173 x 3000 mm.

Find out more

Chassis TB/KTB-140 for sliding plate L=3000mm

Precision-extruded aluminium profile to DIN 17615, warm hardened, surface anodized natural, smooth ends.

Find out more

Minidrive Conveyors KTB

Montech Minidrive Conveyors KTB are used to carry parts to or from the various manufacturing stations, […]

Find out more

Max Conveyors GTB

Montech Max Conveyors GTB are used to carry parts to or from the various manufacturing stations, or […]

Find out more

Belt conveyors TB

Montech Conveyors TB are used to carry parts to or from the various manufacturing stations or combined […]

Find out more

Solar Conveyor SOLTB

The Solar Conveyors SOLTB are used as feed or removal conveyors or for interlinking entire production […]

Find out more

Unloading Conveyor SOLTB-E

The Unloading Conveyor SOLTB-E is a conveyor with two belts consisting of a stationary and an […]

Find out more

Removal Module SOLTB-ASM-104x144

Removal Modules SOLTB-ASM-104x144 are pneumatically driven modules that can be used for individual […]

Find out more

Swiveling Conveyor SOLTB-S

With the Swiveling Conveyor SOLTB-S can detective products be removed in the line. Due to the centrally […]

Find out more

Short Conveyor SOLTB-K

The Short Conveyor with its small dimensions is used to check wafer edges. • Chassis width: 114 mm • […]

Find out more

Centering Conveyor SOLTB-Z

The Centering Conveyor is used for centering 125x125 mm and 156x156 mm wafers, after unloading, prior […]

Find out more

Vacuum conveyor SOLTB-V

The Vacuum Conveyor that, compared to the Solar conveyor, offers more dynamic acceleration and braking […]

Find out more

Basic Conveyors BTB

Montech Basic Conveyors BTB are used to carry parts to or from the various manufacturing stations, or […]

Find out more

Minidrive Conveyors KTB

Montech Minidrive Conveyors KTB are used to carry parts to or from the various manufacturing stations, […]

Find out more

Conveyors TB

Montech Conveyors TB are used to carry parts to or from the various manufacturing stations or combined […]

Find out more

Intelligent conveyor system : MONTRAC

Is an intelligent conveyor system for manufacturing and logistical processes. Montrac systems are […]

Find out more

Max Conveyors GTB

Montech Max Conveyors GTB are used to carry parts to or from the various manufacturing stations, or […]

Find out more

Conveyor system for manufacturing and logistical processes

 Flexible, simple and user-friendly; the possibilities are nearly limitless. Montrac has been […]

Find out more

Lifting device HE-100

Designed as a compact and extremely stable unit for short, straight movements, the Lifting Unit HE is […]

Find out more

Drive unit for BPBE-185 compl

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. […]

Find out more

Bypass BPE right without drive for TB-140

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In […]

Find out more

Bypass BPE left without drive for TB-185

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In […]

Find out more

Bypass BPE left with drive for TB-185

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In […]

Find out more

Bypass BPE left with drive for TB-250

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In […]

Find out more

Rotatory diverter 180° UR-1 for TB-105

The rotary diverter UR-180° is employed in transport systems for diverting the workpiece holder from […]

Find out more

Indexing device IVE complete

The indexing device IVE is used for assembly and process tasks which require excellent workpiece […]

Find out more

Drive unit for BPBE-105 compl

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. […]

Find out more

Bypass BPE right without drive for TB-105

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In […]

Find out more

Drive unit for BPBE-140 compl

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. […]

Find out more

Drum drive GTB-400 - 9 m/min

• TM 60.1 x 363 mm, P = 30 W • 1 x 230 V, 50 Hz • Electrical protection: IP 65 • Connecting cable 3 m included

Find out more

Drum drive GTB-500 - 9 m/min

• TM 60.1 x 463 mm, P = 30 W • 1 x 230 V, 50 Hz • Electrical protection: IP 65 • Connecting cable 3 m included

Find out more

Drum drive GTB-600 - 5.4 m/min

• TM 60.1 x 563 mm, P = 30 W • 1 x 230 V, 50 Hz • Electrical protection: IP 65 • Connecting cable 3 m included

Find out more

Gear motor G80F/4D71b-4 (v= 19.9-56.6 m/min)

• Power: 370 W • Output speed: 144 1/min • Reduction: 9.53

Find out more

Gear motor 3G90F/71/4D63b4-8 (v= 0.5-1.3 m/min)

• Power: 60 W • Output speed: 3.9 1/min • Reduction: 162.85

Find out more

Gear motor G90F/4D63b4-8 (v= 1.8-4.5 m/min)

• Power: 60W • Output speed: 14.3 1/min • Reduction: 43.91

Find out more

Gear motor G90F/4D71L-4 (v= 19.9-39.6 m/min)

• Power: 650W • Output speed: 147 1/min • Reduction: 9.30

Find out more

Gear motor SG-80/M50L4/197:1

• Nominal output: 45 W • Voltage: 230/400 V, 50 Hz • Degree of protection: IP 55

Find out more

Gear motor SG-80/M50L4/61:1

• Nominal output: 45 W • Voltage: 230/400 V, 50 Hz • Degree of protection: IP 55

Find out more

Gear motor G80F/4DB63a-4/7.1:1

• Nominal output: 180 W • Voltage: 3 x 230/400 V, 50 Hz • Degree of protection: IP 54

Find out more

Gear motor KTB Version S

• Type: brushless external-rotor DC motor • Rated voltage: 24 V DC • Operating voltage: 18 to 28 […]

Find out more

Gear motor KTB Version L

• Type: brushless external-rotor DC motor • Rated voltage: 24 V DC • Operating voltage: 18 to 28 […]

Find out more

Gear motor G90F/4D63b4 (v= 6.3-15.3 m/min)

• Power: 180W • Output speed: 46 1/min • Reduction: 30.19

Find out more

Gear motor 3G90F/71/4D63b4-8 (v= 0.5-1.3 m/min)

• Power: 60 W • Output speed: 3.9 1/min • Reduction: 162.85

Find out more

Sprocket kit : Article-No. 58659

Sprocket kits with bore-ø10mm (for gear motor SG-80) v= 0.6/1.7 m/min, z=12/ø10.

Find out more

Sprocket kit : Article-No. 41668

Sprocket kits with bore-ø10mm (for gear motor SG-80). Sprocket kit v= 0.7/2.1 m/min, z=15/ø10.

Find out more

Sprocket kit : Article-No. 41669

Sprocket kits with bore-ø10mm (for gear motor SG-80). v= 0.9/2.7 m/min, z=19/ø10.

Find out more

Sprocket kit : Article-No. 41670

Sprocket kits with bore-ø10mm (for gear motor SG-80). v= 1.0/3.3 m/min, z=23/ø10.

Find out more

Sprocket kit : Article-No. 58660

Sprocket kits with bore-ø10mm (for gear motor SG-80). v= 1.3/4.1 m/min, z=29/ø10.

Find out more

Sprocket kit : Article-No. 58657

Sprocket kits with bore-ø 12mm (for gear motor G80F). v= 6.0/15.9 m/min, z=12/ø12.

Find out more

Sprocket kit : Article-No. 58658

Sprocket kits with bore-ø 12mm (for gear motor G80F). v= 14.5/38.4 m/min, z=29/ø12.

Find out more

Sprocket kit : Article-No. 44980

Sprocket kits with bore-ø 12mm (for gear motor G80F). v= 7.5/19.9 m/min, z=15/ø12.

Find out more

Transfer gate WEE for TB-105

The transfer gate WEE is used to distribute workpiece holders from one conveyor to two conveyors […]

Find out more

Fixed curve 90° KFE-105 version M compl

The kit for fixed curve 90° KFE can simply screwed onto the conveyor profile. A finger protection […]

Find out more

Movable curve 90° KBEA with drive for TB-105

The movable curve 90° KBE can be used for inward and outward transfer in a bypass. Just like the fixed […]

Find out more

Movable curve 90° KBE without drive for TB-105

The movable curve 90° KBE can be used for inward and outward transfer in a bypass. Just like the fixed […]

Find out more

Fixed curve 90° KFE-105 version E compl

The kit for fixed curve 90° KFE can simply screwed onto the conveyor profile. A finger protection […]

Find out more

Electrical parallel gripper GPE

Electrical parallel grippers GPE are electrically operated, moment-controlled grippers for internal […]

Find out more

Positioning Unit PVE for TBD-105 complete

Positioning unit PVE is used when application of a high force to the workpiece has to be realized in […]

Find out more

Positioning Unit PVE for TB-250 complete

Positioning unit PVE is used when application of a high force to the workpiece has to be realized in […]

Find out more

Transfer System LTE

The single-belt transfer system LTE from Montech is an asynchronous transfer system whose function is […]

Find out more

Servo horizontal axis SHA-340-400-LH

The Servo Horizontal Axis SHA-340 is an electrically operated, position-controlled linear unit which […]

Find out more

Lifting device HE-50

Designed as a compact and extremely stable unit for short, straight movements, the Lifting Unit HE is […]

Find out more

Connecting cable 5m KTB

Connecting cable 5m KTB.

Find out more

Connecting cable 10 m KTB

Connecting cable 10 m KTB.

Find out more

Compact Universal Slide KUS-25-180-SD

The Compact Universal Slide KUS has a robust design with very high rigidity and a long life. Hydraulic […]

Find out more

Compact Universal Slide KUS-20-40-SD

The Compact Universal Slide KUS has a robust design with very high rigidity and a long life. Hydraulic […]

Find out more

Rotary unit DAP-2

The Rotary Drives DAP are distinguished by exceptionally high performance data and an extremely […]

Find out more

Electrical rotary unit DAE-60

The electrical rotary drives are electrically operated, position-controlled rotary drives for […]

Find out more

Supporting profile TP-16-40 L=1000mm

This is a profile system that is compatible with all products. It is specifically designed for dynamic […]

Find out more

Belt coupling BKE-105 for TB/TB

The belt coupling BKE is used for coupling a double-belt conveyor TBD to a single-belt conveyor TBE, […]

Find out more

Automation

Components are a modular system for automated assembly. All components are equipped with our proven […]

Find out more

Servo Horizontal Unit SHE-130-100

The Servo Horizontal Units SHE were developed for shorter strokes. The three standard stroke lengths […]

Find out more

Gear motor G80F/4D63a-4/18.9:1

• Nominal output: 120 W • Voltage: 3 x 230/400 V, 50 Hz • Degree of protection: IP 54

Find out more