Microplasma

Plasma welding machine

The DF-6 Automation is a fully automatic drag finishing machine for the deburring, edge-rounding and polishing of cutting tools. The workpieces are loaded and unloaded by means of a 6-axis Fanuc robot...

Ask for a quote

Presentation

- Modular plasma/TIG welding machine with Comfort 2.0 P control - Plasma and TIG welding - Plasma and pulsed TIG welding - Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc - Plasma and TIG welding current adjustable in 0.1 A increments - Pilot arc current adjustable in 0.1 A increments between 2–15 A - The pilot arc current can be adjusted at four operating points during the welding process (beforehand, during, and following welding, as well as during pauses in welding) - Non-latched/latched operation - Spot welding/tack function (spotArc/spotmatic) - Spotmatic – reduce the time required for tacking by up to 50% (TIG only) - Adjustable up-slope and down-slope time - 3.5 m mains supply lead with 16 A shock-proof plug

INTERNET USERS ALSO CONSULTED ON THE CATEGORY PLASMA WELDING MACHINE

Rental welding-related Speciality Equipment : Powermax 30 Plasma Cutter

Ask for a quote

Tomahawk TOMAHAWK® 1025

Ask for a quote

Check out all the products from category plasma welding machine