The GB-40 1250 is an ideal manual press brake for sheet metal bending. Powerful and low consumption, this press brake is able to chamfer a length up to 1,250 mm.
Low volume and low weight, the GB-40 1250 manual press brake has a 40 ton thrust force. Operating at a power / pressure of 4.5 kW, it provides a bending speed of 10 mm / s.
This manual press brake is equipped with two cylinders, an electrically controlled adjustment stop with numerator and a pressure limiting valve. The adjustment of the lift and return stroke is digitized.
All you need to run your factory !
