All you need to run your factory !
Linked categories +
Star categories
Products (77)
Products from 1 to 77 of 77
CABLE EQUIPEMENTS
Manual cable cutters
CABLE EQUIPEMENTS
E1 Ø Maxi 20 mm Precise and stable cut with minimal weight For copper, aluminum and multi-fiber cables NOT SUITABLE FOR STEEL AND […]
CABLE EQUIPEMENTS
Ratcheting cable cutters
CABLE EQUIPEMENTS
EC 55 Pair of shears with pawl "on hand" - Ø55mm max For diameter maximum 55 mm cable (Al 450 mm² / Cu 300 mm²) […]
CABLE EQUIPEMENTS
Cutting pliers
CABLE EQUIPEMENTS
Cutting pliers - Spring-loaded automatic opening - Secure push button closure - Ø maxi 20 mm - Attached by a chain - Size : 0.5 kg Code […]
SES-STERLING SA
Sleeve expanders SES-KY serie
SES-STERLING SA
KY sleeving pliers are only suitable for sleeving work with original HELAVIA® and SILAVIA sleeves from SES-STERLING. This ultra-lightweight tool […]
SES-STERLING SA
SES-KP 1 sleeve expander
SES-STERLING SA
These sleeve expanders are ideal for use with original HELAVIA and SILAVIA sleeves. • PLIO-Carbox pressure casting • Solid construction […]
SES-STERLING SA
SES® automatic stripping pliers : SES-6010
SES-STERLING SA
The SES-6010 automatic stripping tool allows the stripping of rigid and flexible conductors and is especially used for a partial stripping of flexible […]
SBE DIRECT
Sealing Pliers
SBE DIRECT
These sealing pliers are the ideal tool to crush your seals and thus make them permanent. Indeed, your teams will be able to maintain your electrical […]
STAHLWILLE
Round nose pliers
STAHLWILLE
DIN ISO 5745, for bending wire loops and rings, long, round, ground jaws, fine serrations on gripping areas.
STAHLWILLE
Snipe nose pliers with cutter
STAHLWILLE
DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, […]
STAHLWILLE
Mechanics snipe nose pliers
STAHLWILLE
Half round, long tapering, serrated jaws.
STAHLWILLE
Waterpump pliers FastGRIP
STAHLWILLE
Patent, box joint with dual support, fast adjustment on the work piece via push button, freely adjustable, easy super fine adjustment with 10 snap-in […]
STAHLWILLE
Pliers wrench PowerGRIP
STAHLWILLE
Patent, box joint, fast adjustment via button press directly on the work piece, freely adjustable, easy super fine adjustment, high transmission ratio […]
STAHLWILLE
Wire twisting pliers
STAHLWILLE
For wire locking of metal fasteners, with side cutter, serrated jaws for positive grip, jaws angled by 40°, suitable for locking wires up to […]
STAHLWILLE
Heavy duty side cutters
STAHLWILLE
DIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, […]
STAHLWILLE
Wire stripping pliers
STAHLWILLE
For wires from 0.5 to 5 mm Diameter in mm , self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm Diameter in mm , special steel.
STAHLWILLE
COMBINATION PLIERS
STAHLWILLE
DIN ISO 5746, precision cutting edges for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life.
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Etau Classic avec Taillants pour couper des […]
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Etau Classic avec Taillants pour couper des Electrodes
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Inomic® - Pince Demi Ronde Inomic® VDE
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Inomic® - Pince Demi Ronde Inomic® VDE
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Multiprise Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Multiprise Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Multiprise Classic avec Réglage par Bouton-Poussoir
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Multiprise Classic avec Réglage par Bouton-Poussoir
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional - Pince Multiprise Professionnal avec Charnière QuickFix
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional - Pince Multiprise Professionnal avec Charnière QuickFix
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional ESD Grande Précision - Jeu de Pincettes SMD Professional […]
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional ESD Grande Précision - Jeu de Pincettes SMD Professional ESD, 4 pièces
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional ESD Grande Précision - Jeu de Pinces Professional ESD, 4 […]
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional ESD Grande Précision - Jeu de Pinces Professional ESD, 4 pièces
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional ESD Grande Précision - Pince à Becs Demi-Ronds […]
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Professional ESD Grande Précision - Pince à Becs Demi-Ronds Professional ESD Tête Courbée
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Universelle Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Universelle Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Industrial - Pince Universelle Industrial
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Industrial - Pince Universelle Industrial
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Tenailles de Charpentier Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Tenailles de Charpentier Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Tenailles Russes Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Tenailles Russes Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Coupante Diagonale Grande Capacité Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Coupante Diagonale Grande Capacité Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Coupante Diagonale de Mécanicien de Précision […]
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Coupante Diagonale de Mécanicien de Précision Classic avec Ressort
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Industrial - Pince Demi-Ronde Industrial avec Coupe-fils
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Industrial - Pince Demi-Ronde Industrial avec Coupe-fils
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Coupe-Câbles Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Classiques - Pince Coupe-Câbles Classic
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Industrial - Pince Coupante Diagonale Grande Capacité Industrial
CERGY-VIS
Wiha : WIHA- Pinces - Pinces Industrial - Pince Coupante Diagonale Grande Capacité Industrial
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - M2007: Pince Manuelle Multidimensionnelle
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - M2007: Pince Manuelle Multidimensionnelle
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - P2007: Pneumatic Tool, M3 - M10
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - P2007: Pneumatic Tool, M3 - M10
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - BRK01: Hand Clamp
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - BRK01: Hand Clamp
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - BRK10: Lever Clamp
CERGY-VIS
"Rivklés" Flush Nuts : Rivklés Installation Tools - BRK10: Lever Clamp
NORRES SCHLAUCHTECHNIK
Hose pliers
NORRES SCHLAUCHTECHNIK
Knipex hose pliers for cutting through the spring steel wire/ supporting spiral:• Precision blades for soft, hard or piano wire.• Cuts material like […]
HAIMER
Collet for Haimer Power Collet Chuck
HAIMER
– High runout accuracy: 0.005 mm at 3 x D– Superior clamping strength– Fits HAIMER Power Collet Chucks– For cylindrical shanks with tolerance h10
FIBRO
Gripper modules
FIBRO
Clamping elements for holding workpieces or tools securely during handling movements. Pneumatically, hydraulically and electrically operated two-digit […]
CABLE EQUIPEMENTS
Electrical cable cutters device
CABLE EQUIPEMENTS
CC32 Clean cut without deformation of the cable. Protection against electronic overloads and increased service life. Great autonomy: up to 60 […]
CABLE EQUIPEMENTS
Automatic cable reels- ATEX plier
CABLE EQUIPEMENTS
ATEX clamp + cable Protection mode : - II 2 G Ex d IIC T6 Gb - II 2 D Ex tb IIIC T85°C D In compliance with the standards : - EN […]
SES-STERLING SA
SES® automatic stripping pliers of precision : SES-4010
SES-STERLING SA
• For a precision work, with blades adapted to each size of cable. • Flexible stripped cables stay round, ideal for the mounting of […]
SES-STERLING SA
SES® automatic stripping pliers of precision : SES-4011
SES-STERLING SA
Same specifications as type SES-4010. The tool SES-4011 allows simultaneous stripping and length parting of a flat twin-conductor.
SES-STERLING SA
SES® automatic stripping pliers of precision : SES-JOKARI HIGH-STRIP
SES-STERLING SA
An ergonomic automatic wire stripper for fast and precise stripping of cables with following advantages: • No damage of the heart of wire. • […]
SES-STERLING SA
Self adjusting stripping tool MAXISTRIP (0,25 to 10 mm2)
SES-STERLING SA
• Light and robust tool: polyamide body reinforced with glass fibre. • Provided with an adjustable length stop. • Straight cutters […]
SES-STERLING SA
Self adjusting stripping tool SES-JOKARI SUPER 4 (0,5 to 4 mm2)
SES-STERLING SA
• This light yet sturdy tool allows wire stripping in one operation. • Ideal tool for machine fitters and installers, maintenance […]
SES-STERLING SA
MINI-STRIPAX self-adjusting stripping tool (0,08 to 1 mm2) For PVC insulated conductors
SES-STERLING SA
• Stripping tool made of juxtaposed strips in hardened steel which automatically adjust to the wires to be stripped. • Stripping range : […]
SES-STERLING SA
SES-STRIPAX self-adjusting tool (0,08 to 6 mm2)
SES-STERLING SA
• Stripping range : 0,5 to 6 mm2 (AWG 28 to 10). • Copper wire cutting capacity up to 4 mm2 • Strip length : 4 to 18 mm. • 3 […]
SES-STERLING SA
SES-JOKARI 6-16 self-adjusting stripping tool (6 to 16 mm2)
SES-STERLING SA
• For wires of 6 to 16 mm2 (AWG 10 to 5). • Blades are self-adjusting to the bare conductor section (no adjustment). • Allows stripping […]
SES-STERLING SA
SES-JOKARI-FLAT self-adjusting stripping tool (0,75 to 2,5 mm2) for flat cables
SES-STERLING SA
• For PVC insulated flat wires of 0,75 to 2,5 mm2. • Blade width 11 mm. • Removes outer sheathing and inner insulation without […]
SES-STERLING SA
SES XT universal cutting, stripping and crimping tool (0,25 to 6 mm2)
SES-STERLING SA
• Wire cutter, max. capacity Ø 2 mm.• Stripping of sections 0,25 to 6 mm2.• The stripping pressure can be adjusted.• Crimping of bare crimp terminals […]
SES-STERLING SA
SES-418 tool for Telecom twin cables (5/1 to 5/9)
SES-STERLING SA
- To cut, part and strip bronze and bimetal wires of series 5/1 to 5/9.- Comprises three devices :• wire cutting by jaw shearing.• wire parting with […]
SES-STERLING SA
SES 49 cable shears for copper and aluminium conductors up to Ø 10 mm
SES-STERLING SA
• Blades of special shape for cable cutting. • Blades in stainless steel. • Shock resistant plastic handles. • Return spring. […]
SES-STERLING SA
SES ME - 22C cables shears for copper and aluminium conductors up to 22 mm2
SES-STERLING SA
• Blades of special shape for cable cutting. • Shock-resistant plastic handles. • Shears in monobloc forged steel. • Maximum […]
SES-STERLING SA
SES ME - 60 cable shears for copper and aluminium conductors up to 50 mm2
SES-STERLING SA
• To cut copper conductors. • Shear in forged monobloc steel. • Maximum cutting section : 50 mm2. • Concave blades hold the cable […]
SES-STERLING SA
SES KT - 20 70 mm2
SES-STERLING SA
• Cut copper and aluminium cables. • Insulated handles. • Security locking mechanism. • Less manual effort • Black forged […]
SES-STERLING SA
SES MI - 60 shear for steel and copper cables Ø 7 mm
SES-STERLING SA
• Blades in high tensile steel • To cut copper conductors and steel cables. • Handles in aluminium alloy and insulated. • All […]
SES-STERLING SA
SES-108 cable shears for copper and steel conductors - Ø 8 mm
SES-STERLING SA
• Made of high-grade steel, for quick and precise cutting of high-tensile stranded or electrical cables.• Reduction cam allowing to cut tough steel […]
SES-STERLING SA
Diagonal cutting tool 1178 M for copper conductors Ø 1,6 mm
SES-STERLING SA
• To cut cables and cable bundles. • Soitable only for copper conductors up to Ø 1,6 mm. • Insulated handles • Steel return […]
SES-STERLING SA
DX-71 shears for trunkings with holding device
SES-STERLING SA
• Gear reduction system : - ensures a wide jaw opening - and to perform cutting with little effort. • Especially developed to cut conduit […]
SES-STERLING SA
SES - K4 crimping tool for insulated and uninsulated bootlace ferrules
SES-STERLING SA
• Simple tool with leaf spring. • In matt black forged steel. - Crimping : 0,5 - 0,75 - 1 - 1,5 - 2,5 mm2 • Insulated handles.
SES-STERLING SA
Tool for punching and cutting text holders
SES-STERLING SA
• Type: FL252047 • Article number: 0738 0903 000
SES-STERLING SA
DM-SES® mounting tool for DM cable clamps
SES-STERLING SA
Rack tool with adjustable opening for applying of all types of DM-SES cable clamps.
SES-STERLING SA
SES® application tool DM for strain relief grommets DM
SES-STERLING SA
Rack and pinion pliers with adjustable jaws to apply all types of strain relief grommets DM-SES for small or mid-sized series.
SES-STERLING SA
SES® sleeve expanders series KP
SES-STERLING SA
These sleeve expanders are ideal for use with original HELAVIA and SILAVIA sleeves. SES-KP 4 sleeve expander (up to 28 mm Ø max.) for sleeves […]
SES-STERLING SA
DK-60 nibbling tool for trunkings
SES-STERLING SA
- To achieve base punching and slots. - Insulated handles. - Cut width 3 mm - 11 mm cut in one operation
SES-STERLING SA
DC 125 cutter for cable trunking
SES-STERLING SA
- DC 125 cutter cuts trunking at true angles and avoids burring and expensive redressing. - Chip free cutting keeps your site clean. - No pollution or […]
SIRIUS PRAHA
Punching device: PDSE-M
SIRIUS PRAHA
It is suitable for smaller and medium batches and for tubes with bigger number of holes. Only for same size holes. Pitch of the holes can be […]
SIRIUS PRAHA
Punching device : PDS-M
SIRIUS PRAHA
It is suitable for smaller and medium batches and for tubes with bigger number of holes. Only for same size holes. Pitch of the holes can be […]
SIRIUS PRAHA
Punching device: PD-M
SIRIUS PRAHA
It is suitable for smaller and medium batches and for tubes with bigger number of holes. Only for same size holes. Pitch of the holes can be […]
SIRIUS PRAHA
2-line CNC hydraulic punching machine: HPML-A-2T
SIRIUS PRAHA
It is suitable also for big batches and for tubes with bigger number of holes. Only for same size holes and also for different pitch holes.Tolerance […]
SIRIUS PRAHA
2-line CNC Hydraulic punching machine : HPML-A-1T
SIRIUS PRAHA
It is suitable also for big batches and for tubes with bigger number of holes. Only for same size holes and also for different pitch holesTolerance […]
SIRIUS PRAHA
2-lines CNC Hydraulic punching machine : HPML-A-2
SIRIUS PRAHA
It is suitable also for big batches and for tubes with bigger number of holes. Only for same size holes and also for different pitch holesTolerance […]
Users who saw this also viewed
13/06/2024 -
Demande de devis sur une pince de montage DM-SES® pour serre-câbles DM
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
