In-line viscosimetry: L-Vis 510 / 250 Ex

Viscosimeters, Rheometers

Find out more

“ Bringing lab measurement inline - Higher product throughput : the number of lab measurements can be reduced from once per hour to once per day - Increased output product quality : ceramic's waste, for example, can be reduced by 20% as continuous inline of ambient conditions or read-off errors - Reliable inline performance : being the leading supplier for lab rheology instruments, Anton Paar's expertise ensures an excellent correlation between inline sensors and lab instruments under a wide variety of operating conditions - Adjustable shear rates allow for further improving the lab-to-process correlation by adapting shear rates in such a way that they are closer to those of lab instrument Best-in-class analysis of shear-dependant samples - Get more meaningful and detailed information on your sample's properties by applying low shear rates down to 10 s-1. Measure, for example, shear-thinning polymer solutions in their low-shear plateau rather than in the shear-bending area - Accurately track varying flow behavior throughput different process steps by choosing between three different rotation speeds - The influence of temperature variations is minimized due to temperature-compensated viscosity values Rely on results, even under harsh process conditions - The instrument can be installed directly in the product flow - Pressure drops and changes of flow velocity up to 2 m/s do not influence the measurement - External forces, such as bearing and sealing frictions, do not influence the measurement result - Measurements of inhomogeneous fluids and suspensions can be performed, maintaining excellent repeatability Various process installation and communication possibilities - L-Vis can be installed in a stirred tank, in the main line, and in a bypass line. The innovative measuring principle always forces a proper sample exchange - Multiple spool pieces and process connections make the installation as easy as possible - All relevant fieldbuses as well as analog 4-20 mA signal are available to ensure communication to your PLC/DCS ”