All you need to run your factory !
Sub-category +
Star categories
Products (182)
Products from 81 to 160 of 182
SCHMALZ FRANCE
Accessories Needle Grippers SNG-V
SCHMALZ FRANCE
For connecting needle grippers to the gripper system and to the media supply. Mounting plate 34x31x11.5 mm, G1/4" female thread Plug-in screw […]
SCHMALZ FRANCE
Accessories Needle Grippers SNG-M
SCHMALZ FRANCE
Needle gripper is connected using the mounting plate. Flexible compressed air hose connection. Adapter flange plate with G1/4" female thread. […]
SCHMALZ FRANCE
Accessories Needle Grippers SNG-BV
SCHMALZ FRANCE
For connecting needle SNG-BV gripper to the gripping system. Mounting plate 34x31x11.5 mm, G1/4" female thread.
SCHMALZ FRANCE
Floating Suction Cups | SBS-ESD
SCHMALZ FRANCE
Process-safe handling of printed circuit boards and drilled PCBs. Simple separation of intermediate layers during loading and unloading of wet […]
SCHMALZ FRANCE
Ejector Modules ecoPump SEP
SCHMALZ FRANCE
Ejector module for energy efficient vacuum generation with Schmalz eco nozzle technology. Direct installation in gripping tools without […]
SCHMALZ FRANCE
Flat Suction Cups PFYN
SCHMALZ FRANCE
Round, flat suction cup for handling of flat workpieces with smooth or slightly rough surfaces. Handling of hot workpieces (HT1, SI, FPM). Low marking […]
WINKEL
Coil turning units type C 5/C10
WINKEL
The space saving turning unit for 5 t und 10 t coils. Coil turning units of type C 5 and C 10 are available as turning units [Typ C 5 W and C 10 W] or […]
WINKEL
Quality forks ISO/FEM-suspension
WINKEL
Today the ISO/FEM-suspension is world-wide the most common way of connecting forks to the lift-truck.According to the rated truck capacity the […]
WINKEL
Forks with folding back stop PalFix
WINKEL
to take up pallets in longitudinal and cross directionfaster pallet handlingsafety in pallet stacking
WINKEL
Forks SlippFree
WINKEL
Slippfree is available as coating on forks or fork extensions.protection for carrying loadless noiseless slipperycoating available for forks and fork […]
WINKEL
Forks with reflectors
WINKEL
quality forks with reflectors on the sidereflector positioned in a deepening to avoid scratch offminimizes accidents
WINKEL
Folding forks
WINKEL
Folding forks are recommended for the following applications:fork lift trucks on roadsat limited spacefor transport of fork lift trucksfor 4 wheel […]
WINKEL
Coil turning units Type C 5 W
WINKEL
Technical characteristics:Load capacity: 5,000 kgCoil Ø: 1,600 mmCoil length: 1,200 mm Special designs on request.
WINKEL
Coil turning units Type C 5 WD
WINKEL
Technical characteristics:Load capacity: 5,000 kgSpace needed: 2,370 mmCoil Ø: 1,600 mmCoil length: 1,200 mm Special designs on request.
WINKEL
Coil turning units Type C 10 WD
WINKEL
Technical characteristics:Load capacity: 10,000 kgSpace needed: 2,750 mmCoil Ø: 1,900 mmCoil length: 1,600 mm Special designs on request.
CASEARTECNICA BARTOLI srl
Cheese elevator with 24V battery
CASEARTECNICA BARTOLI srl
It enables a single operator to simultaneously extract two wheels of cheese, like Parmesan, from the boiler. Equipped with a trolley with rigid […]
CASEARTECNICA BARTOLI srl
Machines to empty the barrels
CASEARTECNICA BARTOLI srl
Ideals to empty drums or containers of any shape, capacity (from 25 to 300 liters) and content, from a prearranged height. The lifting is performed by […]
CAVOTEC
Scissor Systems
CAVOTEC
For many years Cavotec Fladung has developed and manufactured scissor systems for the supply of power to aircraft parked at the gate. The range […]
DBM TECHNOLOGIE
AUTOMATIC HANDLING SYSTEMS TA MODEL
DBM TECHNOLOGIE
Features:movement on two axes (horizontal and vertical)polyester/glass fibre fairingtattile positioner (combinable with PLC Siemens or your […]
DBM TECHNOLOGIE
AUTOMATIC HANDLING SYSTEMS T3 MODEL
DBM TECHNOLOGIE
Features:movement on three axes (two horizontal and one vertical)SIEMENS PLC or your specificationsoperator console for times and cycles display and […]
DBM TECHNOLOGIE
AUTOMATIC HANDLING SYSTEMS TS MODEL
DBM TECHNOLOGIE
Features:movement on two axes (horizontal and vertical)SIEMENS PLC or your specificationsoperator console for times and cycles display and programming […]
DBM TECHNOLOGIE
AUTOMATIC HANDLING SYSTEMS TP MODEL
DBM TECHNOLOGIE
Features:movement on three axes (two horizontal and one vertical)SIEMENS PLC or your specificationsoperator console for times and cycles display and […]
SAPELEM
Manipulator stabilizer of tool by hook custom-made ZE solution
SAPELEM
Made to measure, the manipulator stabilizer of tool by hook, the range ZE solution, is requested for its capacities to balance a meuleuse by […]
SAPELEM
Manipulator for foldings of sheet steels with liking - custom-made ZE solution
SAPELEM
Belonging to the range ZE solution and made to measure, the manipulator for foldings of sheet steels with magnet is used in the field of the […]
SAPELEM
Fast changer for manipulator ZE solution
SAPELEM
The fast changer is ideal for the fast replacement of the tool installed under the manipulator ZE solution. Easy and multi-purpose, this changer is […]
SAPELEM
Base ballasted for manipulator ZE solution
SAPELEM
Allowing the implementation of the manipulator ZE solution, without fixation the ground, the ballasted base is endowed with a steel base with screw […]
SAPELEM
Barrel for manipulator ZE solution
SAPELEM
Ideal to assure the balance and the stability of the manipulator the ground, it made is one foot supporting the arm R2A of the manipulator. Of a […]
SAPELEM
Join turning for manipulator ZE solution
SAPELEM
The rotating join, of a capacity of 300 kg lifting, is ideal to assure a continuous rotation of the tool around the cable of lifting. Becoming […]
SAPELEM
System engineering
SAPELEM
Thanks to its wide experience in the field of the manipulators, the SAPELEM company is able of guiding and of accompanying his customers for the […]
SAPELEM
Manipulator of bags by prehension
SAPELEM
SAPELEM innovates with the new suction cups for the prehension of bags with the ergonomic manipulator arm. Finished the heaviness, the imprecision and […]
SAPELEM
Suction cups
SAPELEM
SAPELEM has a wide range of suction cups which corresponds to every types of needs and environment. Standard suction cups: flat, 1.5, 2.5 or 4.5 […]
SAPELEM
Vacuum Generator
SAPELEM
It’s an individual vacuum generator cleaner allowing to generate a big flow inhaled for a suction cup to make the prehension of porous products. […]
SAPELEM
Inflatable finger
SAPELEM
Prehension of hollow products: - Prehensions of tubes or flasks - Obsturation of openings - Protection of bores - Grip of tubes
SAPELEM
Suction cups simple or double lip series 96
SAPELEM
Very deformed products, large diameter of passage: Very good sealing on rough surfaces Great flexibility of the lip Single or double lip […]
SAPELEM
Anti-slip suction cups 1,5 Bellow with connection
SAPELEM
Anti-slip suction cups 1,5 Bellow with connection -Double sealing lip: Air-saving and wear-resistant -Anti-slip stops: lateral lined capacities […]
SAPELEM
Suction cups Bakery 4.5 bellows with and without join
SAPELEM
Bakery suction cups 4.5 bellows without connection and with connection according to the application needs. The suction cups are used for the […]
SAPELEM
Suction cups "Cheeses" 1.5 bellows and STAINLESS Bars
SAPELEM
SAPELEM develops suction cups dedicated to cheese grip according to current food standards. SAPELEM also designs food grills specially designed for […]
SAPELEM
Bottles Suction cups
SAPELEM
The oblong suction cups "Bottles" are intended for the gripping of bottles but also, of long and narrow products.oblong suction cups […]
SAPELEM
Ergonomis Manipulator ZE SOLUTION
SAPELEM
The SAPELEM company proposes, to his customers, Ze Solution including various types of ergonomic manipulators who meet the requirements of the job for […]
SAPELEM
Ergonomic manipulator standard Ze Solution Hook
SAPELEM
Ze Solution Hook is an ergonomic manipulator, made and marketed by the company SAPELEM and intended to facilitate the handling and the manipulation of […]
SAPELEM
Ergonomic Manipulator standard Ze Solution Glass
SAPELEM
SAPELEM conceived and made the ergonomic manipulator Ze Solution Glass for the benefit of his customers in the domains of industrial joinery to assist […]
SAPELEM
Ergonomic manipulator standard Ze Solution Paletts
SAPELEM
Designed and made by the company SAPELEM, standard Ze Solution Paletts is an ideal ergonomic manipulator for the prehension and the reversal of […]
SAPELEM
Manipulator of automobile axle - custom-made ZE solution
SAPELEM
The manipulator of automobile axle, being a member of the range of the custom-made manipulators ZE solution, is conceived for the supply of post […]
SAPELEM
Manipulator of handling mail buckets - custom-made ZE solution
SAPELEM
SAPELEM proposes the manipulator of handling mail buckets, used in the field of the logistics and allowing the movement and the draining of handling […]
SAPELEM
Manipulator of block silicon by crowbars - custom-made ZE solution
SAPELEM
The SAPELEM company proposes, among its manipulators' selection custom-made ZE solution, the manipulator of block silicon by crowbars allowing the […]
SAPELEM
Manipulator of roll lifter - custom-made ZE solution
SAPELEM
The manipulator of oll lifter, the custom-made range ZE solution, is designed to facilitate the deposit of the reel on a wagon to put down her […]
SAPELEM
Manipulator of roll lifter - custom-made ZE solution
SAPELEM
Proposed by the company SAPELEM and belonging to the custom-made range ZE solution, the manipulator of roll lifter is intended for the manipulation […]
SAPELEM
Manipulator of roll lift filmed by suction cups - custom-made ZE solution
SAPELEM
The manipulator of roll lift filmed by suction cups, of the custom-made range ZE solution, assures the seizure of reels got out of it. With a 160 […]
SAPELEM
Manipulator of paper rolls by crowbars - custom-made ZE solution
SAPELEM
Belonging to the range of the custom-made manipulators ZE solution, SAPELEM, the manipulator of paper rolls by crowbars is conceived to facilitate the […]
SAPELEM
Manipulator of shield automobile by suction cups - custom-made ZE solution
SAPELEM
The manipulator of shield automobile by suction cups, made by the company SAPELEM and belonging to the custom-made range ZE solution, is ideal to […]
SAPELEM
Manipulator of boxes blows up by crowbars - custom-made ZE solution
SAPELEM
The SAPELEM company proposes the plastic manipulator of boxes by crowbars, the custom-made range ZE solution, and intended for the manipulation of […]
SAPELEM
Cardboard manipulator by suction cup - custom-made ZE solution
SAPELEM
The SAPELEM company proposes, among its range of manipulators custom-made ZE solution, the cardboard manipulator by suction cup, ideal for the […]
SAPELEM
Manipulator of parcel by piloted crowbar - custom-made ZE solution
SAPELEM
The manipulator of parcel by piloted crowbar, belonging to the custom-made range ZE solution of SAPELEM, is conceived to maintain a hot water tank got […]
SAPELEM
Manipulator of compressor by hook - custom-made ZE solution
SAPELEM
For the handling of compressor got out of it from the production line, the SAPELEM company proposes manipulator of compressor by hook, ZE solution, […]
SAPELEM
Manipulator of breeches of engine by piloted crowbar - custom-made ZE solution
SAPELEM
Made to measure, the manipulator of breeches of engine by piloted crowbar ZE solution is conceived to manipulate the breeches of automobile engine. […]
SAPELEM
Manipulator of deflector in preforming - custom-made ZE solution
SAPELEM
Realized to measure and belonging to the range ZE solution, the manipulator of deflector in preforming is proposed by the company SAPELEM to […]
SAPELEM
Manipulator of deflector by suction cups - custom-made ZE solution
SAPELEM
Belonging to the range of the custom-made manipulators ZE solution, the manipulator of deflector by suction cups is conceived to help the operator to […]
SAPELEM
Plastic manipulator of barrels and box - custom-made ZE solution
SAPELEM
The plastic manipulator of barrels and box, of the custom-made range ZE solution, is used for the emptying of barrels in complete safety. Indeed, this […]
SAPELEM
Manipulator of electric engines by hook - custom-made ZE solution
SAPELEM
With a capacity of 50 kg lifting, the manipulator of electric engines by hook assures the prehension of the engine thanks to two 2 hooks, retractable […]
SAPELEM
Manipulator of pallets - custom-made ZE solution
SAPELEM
Made to measure, the manipulator of pallets ZE solution is ideal for the handling of pallets in complete safety. Facilitating to the operator his task […]
SAPELEM
Manipulator of melamine boards by suction cups - custom-made ZE solution
SAPELEM
Proposed by the company SAPELEM, the manipulator of melamine boards by suction cups is ideal for the load and the unloading of a saw with panels. This […]
SAPELEM
Manipulator of pieces in graphite by forks - custom-made ZE solution
SAPELEM
For the manipulation of pieces in graphite, the SAPELEM company markets manipulators allowing to seize rooms in graphite thanks to forks, without […]
SAPELEM
Manipulator of mechanical parts on line of paint - custom-made ZE solution
SAPELEM
For the load and the unloading of the trolleys of an air conveyor of a line of paint, the SAPELEM company proposes two manipulators of a […]
SAPELEM
Manipulator of dashboard by crowbars - custom-made ZE solution
SAPELEM
The SAPELEM company conceived the manipulator of dashboard, ideal for the packaging of boards got out of it from the line of manufacturing to place […]
SAPELEM
Manipulator of trays of eggs by forks - custom-made ZE solution
SAPELEM
The manipulator of trays of eggs, conceived by the company SAPELEM, is ideal for the palletization of trays of eggs in an average of 16 trays by […]
SAPELEM
Manipulator of water pumps by crowbar - custom-made ZE solution
SAPELEM
The SAPELEM company proposes the manipulator of water pumps allowing to seize a water pump horizontally in a plastic box, thanks to a crowbar, to put […]
SAPELEM
Manipulator of profiles - custom-made ZE solution
SAPELEM
The manipulator of profiles, proposed by the company SAPELEM, is intended for the manipulation of profiles from 4 to 7 m in a sled of a transtockeur […]
SAPELEM
Manipulator of stators by crowbars - custom-made ZE solution
SAPELEM
Intended for the manipulation of stators, the manipulator of stators is endowed with crowbars allowing a prehension of parts in complete safety. Of […]
SAPELEM
Manipulator heat exchanger by crowbar - custom-made ZE solution
SAPELEM
For the supply of a post of brazing of heat interchange, the manipulator heat exchanger by crowbar is essential to facilitate the manipulation of this […]
SAPELEM
Ergonomic Manipulator Ze Arm
SAPELEM
The ergonomic manipulator Ze Arm, conceived and made by the company SAPELEM, is ideal to assure a better handling of parts and tools. Fast, reactive, […]
SAPELEM
Ergonomic manipulator Ze Joystick
SAPELEM
The ergonomic manipulator Ze Joystick is a control handle used to facilitate the handling and the manipulation of tools and products. It […]
SAPELEM
Ergonomic manipulator Ze Lift
SAPELEM
The SAPELEM company proposes the ergonomic manipulator Ze Lift to his customers in various fields of activity to facilitate the handling of tools or […]
SAPELEM
Ergonomic Manipulator Ze Soft
SAPELEM
Proposed by the company SAPELEM, the ergonomic manipulator Ze Soft is ideal for the handling and the manipulation of products or tools in various […]
Bauer GmbH
Wheelie bin tipper type MK
Bauer GmbH
-sturdy steel construction ?? -fork sleeves for pick-up using forks ??-suitable for forklift trucks, site Dumpers and other vehicles with forks ??-can […]
Bauer GmbH
Wheelie bin tipping station type MKS
Bauer GmbH
-hydraulic or electric construction ??-approx. 39 strokes required for hydraulic construction -tilting angle up to 135° ??-emptying height approx. […]
Bauer GmbH
Kippomat type KG
Bauer GmbH
-sturdy frame with fork sleeves and release mechanism ??-can be secured to prevent slipping ??-pallet cage is secured by a tension fixture -a steel […]
GUERIN SYSTEMS SAS
Tetra Pak® Bag Tipping unit GB VS701
GUERIN SYSTEMS SAS
Tetra Pak® Bag Tipping unit GB VS701 is specifically designed to handle bags to discharge powders in an enclosed environment. The station is […]
MARCEAU
Stacker / Destacker
MARCEAU
The stacker / destacker is used to destack and/or stack empty pallets on production lines. There are several models according to the kind of pallets, […]
Users who saw this also viewed
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and Coding - Production equipment - Measurement, Analyses and Tools - General business equipment
