All you need to run your factory !
This product is temporarily unavailable.
Think about consulting similar products.
HEMPADUR SPRAY-GUARD 35493 is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating. It can be spray applied in one coat at a minimum film...
HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion. Applicable in thick coats by standard heavy duty airless spray equipment. Harmless to grain cargo.
Recommended use : As a heavy duty coating on steel exposed to abrasion where solvent-free materials are required. Full colour retention will be of secondary importance. If solvent containing paints are accepted, HEMPADUR MULTI-STRENGTH 45751 substitutes. As a lining in potable water tanks and pipelines. For application in warm climates.
Service temperature : Maximum, dry exposure only: 140°C/284°F. In water (no temperature gradient): 35°C/95°F
See also
