All you need to run your factory !
This product is temporarily unavailable.
Think about consulting similar products.
HEMPADUR 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains micaceous iron oxide and zinc phosphate. The product cures at temperatures above...
HEMPADUR 17630 is a two-component, high-build, polyamide adduct-cured epoxy paint which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.
Recommended use:
As a selfprimed coating for ballast water tanks and similar. As a primer for epoxy systems for atmospheric or in-water service, eg ship hulls. Suitable for application down to 0°C/ 32°F.
HEMPADUR 17630 is intended for use in temperate to warm climates. For cold/temperate climates use HEMPADUR 17633.
Service temperature:
• Maximum, dry exposure only: 120°C/248°F (see REMARKS overleaf)
• Ballast water service. Resists normal ambient temperatures at sea (Avoid long-term exposure tonegative temperature gradients).
• In water (no temperature gradient): 40°C/105°F
• Other liquids. Contact HEMPEL
Availability:
Part of Group Assortment. Local availability subject to confirmation
See also
