Component solvent intumescent : HEMPACORE ONE 43600

This product is temporarily unavailable.
Think about consulting similar products.

Made of aluminum, the precision elastic couplings are mainly used for mounting the coupling for industrial work. Marketed under the Rathi brand, these components have limited dimensions and...

“ Certificates/Approvals: Tested and approved according to EN13381-8 and BS476-21 for up to 120 minutes fire protection. Fire protection up to 4 hours can be achieved for a limited range of massivity (Hp/A) sections at various critical temperatures. Approved by GB14907-2002 up to 2½ hours. CE marked product with European Technical Approval ETA 12/0581 according to ETAG018 Part 2. Approved with Certifire certificate nº CF 5146. ”

Make a request

Presentation

HEMPACORE ONE 43600 is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is suitable for in-shop and on-site applications.

Recommended use:

As intumescent fire protection for internal and external structural steel. Suitable for open beams and columns and hollow sections.
As a repair and touch-up coating for damaged areas of freshly applied HEMPACORE ONE 43600.
Applied in up to 1500 micron [60 mils] dry film thickness per coat (equivalent to 2000 micron [80 mils] wet film thickness).

Availability:

Part of Group Assortment. Local availability subject to confirmation.